Power system components modelling and reliability evaluation of generation capacity

This paper describes a methodology based on safety factor concept and peak load considerations for a reliability evaluation of a generation system. This paper also refers to major research papers presented for the evaluation of reliability of power systems, reliability indices and modelling of power system components. Load models are considered as a straight line and a stepped load duration curve is used for reliability evaluation of system using Simpson's 1/3rd rule. The probability of load exceeding the generating capacity has also been considered in Loss of Load Probability (LOLP) evaluation.

[1]  R. Billinton,et al.  Probabilistic assessment of power systems , 2000, Proceedings of the IEEE.

[2]  Ronald N. Allan,et al.  Bibliography on the Application of Probability Methods in Power System Reliability Evaluation 1996-1999 , 1984 .

[3]  George J. Anders,et al.  Probability Concepts in Electric Power Systems , 1990 .

[4]  Y. B. Lee,et al.  Cumulant Based Probabilistic Power System Simulation Using Laguerre Polynomials , 1989, IEEE Power Engineering Review.

[5]  Roy Billinton,et al.  Common cause outage models in power system reliability evaluation , 2003 .

[6]  Ramesh C. Bansal,et al.  Reliability evaluation of interconnected composite power system considering voltage stability at continuation power flow , 2006 .

[7]  Marvin Rausand,et al.  System Reliability Theory , 2020, Wiley Series in Probability and Statistics.

[8]  Ramesh C. Bansal,et al.  Generation capacity adequacy evaluation based on peak load consideration , 2006 .

[9]  Alessandro Birolini.  Reliability Engineering: Theory and Practice , 1999 .

[10]  Ramesh C. Bansal,et al.  Reliability evaluation of power system considering voltage stability and continuation power flow , 2007 .

[11]  W. Nelson.  Statistical Methods for Reliability Data , 1998 .

[12]  Richard E. Barlow,et al.  Engineering reliability , 1987 .

[13]  D. P. Kothari,et al.  Discussion of "Bibliography on the application of probability methods in power system reliability evaluation , 2002 .

[14]  Necip Doganaksoy,et al.  Handbook of Reliability Engineering , 1994 .

[15]  Roy Billinton,et al.  Reliability assessment of a restructured power system using reliability network equivalent techniques , 2003 .

[16]  R. Billinton,et al.  Unreliability Cost Assessment of an Electric Power System Using Reliability Network Equivalent Approaches , 2002, IEEE Power Engineering Review.

[17]  Roy Jensen,et al.  Reliability Modeling in Electric Power Systems , 1979 .

[18]  R. Billinton,et al.  Application of adverse and extreme adverse weather: modelling in transmission and distribution system reliability evaluation , 2006 .

[19]  M.M. Alavi-Sereshki,et al.  A generalized continuous distribution approach for generating capacity reliability evaluation and its applications , 1991, IEEE Power Engineering Review.

[20]  Roy Billinton,et al.  Reliability evaluation of power systems , 1984 .