Ammonia-water absorption in vertical tubular absorbers

Abstract This paper presents a detailed analysis of the heat and mass transfer processes during the absorption of ammonia into water in a co-current vertical tubular absorber. The absorber configuration is of the shell and tubes type. The absorption process progresses as the vapour and liquid contact inside the tubes. Water is used as the absorber cooling medium. A differential mathematical model has been developed on the basis of mass and energy balances and heat and mass transfer equations, in order to provide further understanding of the absorber behaviour. The model takes into account separately for the churn, slug and bubbly flow patterns experimentally forecasted in this type of absorption processes inside vertical tubes and considers the simultaneous heat and mass transfer processes in both liquid and vapour phases, as well as heat transfer to the cooling medium. The model equations have been solved using the finite-difference method. Results obtained for specific data are depicted to show local values of the most important variables all along the absorber length. Parametric analyses have been performed to show the influence of design parameters and operating conditions on the absorber performance. The effect of the heat and mass transfer coefficients has also been evaluated.

[1]  Ch. Trepp,et al.  Equation of state for ammonia-water mixtures , 1984 .

[2]  J. Fernández-Seara,et al.  Simultaneous heat and mass transfer of a packed distillation column for ammonia–water absorption refrigeration systems , 2002 .

[3]  A. E. Dukler,et al.  Modelling flow pattern transitions for steady upward gas‐liquid flow in vertical tubes , 1980 .

[4]  V. Gnielinski.  New equations for heat and mass transfer in turbulent pipe and channel flow , 1976 .

[5]  James P. Brill,et al.  Slug to churn transition in upward vertical two-phase flow , 1997 .

[6]  Geoffrey F. Hewitt,et al.  Visualisation and modelling studies of churn flow in a vertical pipe , 2001 .

[7]  A. Colburn,et al.  Mass Transfer (Absorption) Coefficients Prediction from Data on Heat Transfer and Fluid Friction , 1934 .

[8]  W. Nusselt.  Die Oberflachenkondensation des Wasserdampfes , 1916 .

[9]  A. P. Lamourelle,et al.  Gas absorption into a turbulent liquid , 1972 .

[10]  N. Zuber,et al.  Average volumetric concentration in two-phase flow systems , 1965 .

[11]  R. Christensen,et al.  Ammonia-water bubble absorber with a plate heat exchanger , 1998 .

[12]  Sung Hyun Kim,et al.  A study on numerical simulations and experiments for mass transfer in bubble mode absorber of ammonia and water , 2003 .

[13]  T. B. Drew,et al.  The condensation of mixed vapors , 1965 .

[14]  G. Hewitt.  GAS-LIQUID FLOW , 2006 .

[15]  G. S. Herbine.  Model of an ammonia-water bubble adsorber , 1995 .

[16]  José Fernández-Seara,et al.  Distillation column configurations in ammonia–water absorption refrigeration systems , 2003 .

[17]  S. Asai,et al.  Gas hold-up in bubble columns , 1980 .

[18]  R. Clift,et al.  Bubbles, Drops, and Particles , 1978 .

[19]  Yong Tae Kang,et al.  Analytical investigation of two different absorption modes: falling film and bubble types , 2000 .

[20]  C. A. Infante Ferreira,et al.  Heat and mass transfer in vertical tubular bubble absorbers for ammonia-water absorption refrigeration systems , 1984 .

[21]  G. Wallis.  One Dimensional Two-Phase Flow , 1969 .

[22]  R. E. Treybal.  Mass-Transfer Operations , 1955 .

[23]  G. Hewitt,et al.  Studies of Two-Phase Flow Patterns by Simultaneous X-Ray and Flash Photography , 1969 .

[24]  S. Kutateladze,et al.  Fundamentals of Heat Transfer , 1963 .

[25]  Bidyut Baran Saha,et al.  Development of a slug flow absorber working with ammonia-water mixture: part I—flow characterization and experimental investigation , 2003 .

[26]  Koichi Terasaka,et al.  Ammonia absorption from a bubble expanding at a submerged orifice into water , 2002 .

[27]  T. Elperin,et al.  Four stages of the simultaneous mass and heat transfer during bubble formation and rise in a bubbly absorber , 2003 .

[28]  Alexandra M.F.R. Pinto,et al.  Coalescence of two gas slugs rising in a vertical column of liquid , 1996 .

[29]  Felix Ziegler,et al.  Recent developments and future prospects of sorption heat pump systems , 1999 .

[30]  Reinhard Radermacher,et al.  Absorption Chillers and Heat Pumps , 1996 .

[31]  Graham B. Wallis,et al.  Two-Phase Slug Flow , 1961 .

[32]  J. Whitelaw,et al.  Convective heat and mass transfer , 1966 .

[33]  John F. Davidson,et al.  The motion of a large gas bubble rising through liquid flowing in a tube , 1978, Journal of Fluid Mechanics.

[34]  Alexandra M.F.R. Pinto,et al.  Coalescence of two gas slugs rising in a co-current flowing liquid in vertical tubes , 1998 .

[35]  Corry de Keizer,et al.  Absorption refrigeration machines , 1982 .

[36]  José Fernández-Seara,et al.  Heat recovery system to power an onboard NH3-H2O absorption refrigeration plant in trawler chiller fishing vessels , 1998 .

[37]  W. K. Lewis,et al.  Principles of Gas Absorption. , 1924 .

[38]  Bidyut Baran Saha,et al.  Development of a slug flow absorber working with ammonia–water mixture: part II—data reduction model for local heat and mass transfer characterization , 2003 .

[39]  Moissis.  THE TRANSITION FROM SLUG TO HOMOGENEOUS TWO-PHASE FLOWS. Topical Report No. 1. Report No. 304 , 1963 .

[40]  Yong Tae Kang,et al.  Mass transfer correlation of NH3–H2O bubble absorption , 2002 .

[41]  G. A. Hughmark,et al.  Holdup and Mass Transfer in Bubble Columns , 1967 .

[42]  J. Fernández-Seara,et al.  Heat and mass transfer analysis of a helical coil rectifier in an ammonia–water absorption system , 2003 .

[43]  W. Deckwer,et al.  On the mechanism of heat transfer in bubble column reactors , 1980 .