Integrated Intelligent Green Scheduling of Predictive Maintenance for Complex Equipment based on Information Services

As an important link to guarantee normal industrial production, equipment maintenance plays an increasingly key role in enhancing the competitiveness of enterprises and supporting green smart manufacturing. This paper aims to promote the implementation of predictive maintenance for complex equipment and improve the green performance of the maintenance service process. A structural framework of information sharing and service network is introduced to build a ubiquitous state data awareness environment for predictive maintenance service. Subsequently, an integrated mathematical problem model that consists of carbon emission objective and extended maintenance cost objective is constructed. Then an improved NSGA-II algorithm is utilized to solve this complicated two-objective optimization problem. In response to deal with the uncertainties of maintenance service environment and inaccuracy of prediction, a data-driven dynamic adjustment strategy is applied. A grinding roll fault case of a large vertical is used to demonstrate the effectiveness of this proposed approach.

[1]  Song Yao,et al.  Minimizing total carbon emissions in an integrated machine scheduling and vehicle routing problem , 2019, Journal of Cleaner Production.

[2]  Shanghua Mi,et al.  A scheduling optimization method for maintenance, repair and operations service resources of complex products , 2020, J. Intell. Manuf..

[3]  Ying Wang,et al.  Single-machine-based predictive maintenance model considering intelligent machinery prognostics , 2012 .

[4]  Zhenhua Yu,et al.  A Pareto-based genetic algorithm for multi-objective scheduling of automated manufacturing systems , 2020 .

[5]  Yixiong Feng,et al.  Big Data Analytics for System Stability Evaluation Strategy in the Energy Internet , 2017, IEEE Transactions on Industrial Informatics.

[6]  Zhenghua Chen,et al.  A review on swarm intelligence and evolutionary algorithms for solving flexible job shop scheduling problems , 2019, IEEE/CAA Journal of Automatica Sinica.

[7]  Martin J. Oates,et al.  The Pareto Envelope-Based Selection Algorithm for Multi-objective Optimisation , 2000, PPSN.

[8]  Shuaiqun Wang,et al.  A Hybrid Discrete Imperialist Competition Algorithm for Fuzzy Job-Shop Scheduling Problems , 2016, IEEE Access.

[9]  Wim J. C. Verhagen,et al.  Predictive maintenance for aircraft components using proportional hazard models , 2018, J. Ind. Inf. Integr..

[10]  Harald Rødseth,et al.  Profit loss indicator: a novel maintenance indicator applied for integrated planning , 2015 .

[11]  Torgeir Welo,et al.  The concept of sustainable manufacturing and its definitions: A content-analysis based literature review , 2017 .

[12]  Guangdong Tian,et al.  A carbon efficiency evaluation method for manufacturing process chain decision-making , 2017 .

[13]  Yixiong Feng,et al.  Environmentally friendly MCDM of reliability-based product optimisation combining DEMATEL-based ANP, interval uncertainty and Vlse Kriterijumska Optimizacija Kompromisno Resenje (VIKOR) , 2018, Inf. Sci..

[14]  Jay Lee,et al.  A Cyber-Physical Systems architecture for Industry 4.0-based manufacturing systems , 2015 .

[15]  Jay Lee,et al.  A Minimal-Sensing Framework for Monitoring Multistage Manufacturing Processes Using Product Quality Measurements , 2018 .

[16]  Nagi Gebraeel,et al.  Sensory-Updated Residual Life Distributions for Components With Exponential Degradation Patterns , 2006, IEEE Transactions on Automation Science and Engineering.

[17]  Neal Dowling,et al.  Equipment Failure Characteristics and RCM for Optimizing Maintenance Cost , 2015, IEEE Transactions on Industry Applications.

[18]  Jian Wan,et al.  Predictive Maintenance for Improved Sustainability — An Ion Beam Etch Endpoint Detection System Use Case , 2014 .

[19]  Rudolph F. Laubscher,et al.  Recent developments in sustainable manufacturing of gears: a review , 2016 .

[20]  Lin Li,et al.  Joint Maintenance and Energy Management of Sustainable Manufacturing Systems , 2015 .

[21]  Harald Rødseth,et al.  Data-driven Predictive Maintenance for Green Manufacturing , 2016 .

[22]  Kalyanmoy Deb,et al.  A fast and elitist multiobjective genetic algorithm: NSGA-II , 2002, IEEE Trans. Evol. Comput..

[23]  Xin Yao,et al.  Multi-scale statistical process monitoring in machining , 2005, IEEE Transactions on Industrial Electronics.

[24]  Mehdi Behzad,et al.  Improving sustainability performance of heating facilities in a central boiler room by condition-based maintenance , 2019, Journal of Cleaner Production.

[25]  Shiwei Yu,et al.  Carbon emission coefficient measurement of the coal-to-power energy chain in China , 2014 .

[26]  Hao Zheng,et al.  Integrated intelligent green scheduling of sustainable flexible workshop with edge computing considering uncertain machine state , 2020 .

[27]  MengChu Zhou,et al.  Dual-Objective Program and Scatter Search for the Optimization of Disassembly Sequences Subject to Multiresource Constraints , 2018, IEEE Transactions on Automation Science and Engineering.

[28]  Liang Qi,et al.  Modified cuckoo search algorithm to solve economic power dispatch optimization problems , 2018, IEEE/CAA Journal of Automatica Sinica.

[29]  Ning Ye,et al.  A Fault Prediction Algorithm Based on Rough Sets and Back Propagation Neural Network for Vehicular Networks , 2018, IEEE Access.

[30]  Shixin Liu,et al.  Lexicographic Multiobjective Scatter Search for the Optimization of Sequence-Dependent Selective Disassembly Subject to Multiresource Constraints , 2020, IEEE Transactions on Cybernetics.

[31]  Jay Lee,et al.  Industrial Big Data Analytics and Cyber-physical Systems for Future Maintenance & Service Innovation , 2015 .

[32]  Enrico Zio,et al.  Artificial intelligence for fault diagnosis of rotating machinery: A review , 2018, Mechanical Systems and Signal Processing.

[33]  Geok Soon Hong,et al.  Prognosis of the probability of failure in tool condition monitoring application-a time series based approach , 2015 .

[34]  ZhiWu Li,et al.  On Scalable Supervisory Control of Multi-Agent Discrete-Event Systems , 2017, ArXiv.

[35]  B. S. Pabla,et al.  Condition based maintenance of machine tools—A review , 2015 .

[36]  Guohua Wu,et al.  Framework for fault diagnosis with multi-source sensor nodes in nuclear power plants based on a Bayesian network , 2018, Annals of Nuclear Energy.

[37]  MengChu Zhou,et al.  Target Disassembly Sequencing and Scheme Evaluation for CNC Machine Tools Using Improved Multiobjective Ant Colony Algorithm and Fuzzy Integral , 2019, IEEE Transactions on Systems, Man, and Cybernetics: Systems.

[38]  MengChu Zhou,et al.  Modeling and Planning for Dual-Objective Selective Disassembly Using and/or Graph and Discrete Artificial Bee Colony , 2019, IEEE Transactions on Industrial Informatics.

[39]  Yixiong Feng,et al.  An optimal dynamic interval preventive maintenance scheduling for series systems , 2015, Reliab. Eng. Syst. Saf..

[40]  Chunming Ye,et al.  Single-machine-based joint optimization of predictive maintenance planning and production scheduling , 2018, Robotics and Computer-Integrated Manufacturing.

[41]  Zhiwu Li,et al.  An Approach to Improve Permissiveness of Supervisors for GMECs in Time Petri Net Systems , 2020, IEEE Transactions on Automatic Control.

[42]  Chungang Yan,et al.  Robust Learning to Rank Based on Portfolio Theory and AMOSA Algorithm , 2017, IEEE Transactions on Systems, Man, and Cybernetics: Systems.

[43]  Daming Lin,et al.  A review on machinery diagnostics and prognostics implementing condition-based maintenance , 2006 .

[44]  Jing Yang,et al.  Sustainable performance oriented operational decision-making of single machine systems with deterministic product arrival time , 2014 .

[45]  Lihui Wang,et al.  Cloud-enhanced predictive maintenance , 2018 .

[46]  S. X. Yang,et al.  An Adaptive Approach Based on KPCA and SVM for Real-Time Fault Diagnosis of HVCBs , 2011, IEEE Transactions on Power Delivery.

[47]  Gilbert Laporte,et al.  The Pollution-Routing Problem , 2011 .

[48]  Bhupesh Kumar Lad,et al.  Optimal maintenance schedule decisions for machine tools considering the user's cost structure , 2012 .

[49]  Teresa Olivares,et al.  IoT Heterogeneous Mesh Network Deployment for Human-in-the-Loop Challenges Towards a Social and Sustainable Industry 4.0 , 2018, IEEE Access.

[50]  Athanasios V. Vasilakos,et al.  Anomaly detection and predictive maintenance for photovoltaic systems , 2018, Neurocomputing.

[51]  Guangdong Tian,et al.  Green decoration materials selection under interior environment characteristics: A grey-correlation based hybrid MCDM method , 2018 .

[52]  Yixiong Feng,et al.  Flexible Process Planning and End-of-Life Decision-Making for Product Recovery Optimization Based on Hybrid Disassembly , 2019, IEEE Transactions on Automation Science and Engineering.