Multi-objective design model for retrofit of reinforced concrete frames with infilled walls using FRP bracings

Abstract Since existing structures can be retrofitted without removing or damaging the existing structural members, a seismic retrofit with FRP bracings has high applicability and cost efficiency. This study proposes an FRP-bracing-based optimal seismic retrofit method for reinforced concrete (RC) frames with infill walls. This method minimizes the number of FRP bracings for the retrofit and maximizes the dissipated energy while satisfying constraints related to interstory drift and structural collapse. The proposed method is applied to 5- and 10-story reinforced concrete frames, and optimal retrofit schemes that suggest the locations and number of FRP bracings are obtained. To support the decision-making of the building owner and engineer, the representative retrofit plans are selected and analyzed. It is shown that a reinforced structure with the optimal solution shows improved results in terms of both strength and deformation capacity.

[1]  B. Binici,et al.  Numerical Study on CFRP Strengthening of Reinforced Concrete Frames with Masonry Infill Walls , 2014 .

[2]  Hyo Seon Park,et al.  Multi-objective seismic design method for ensuring beam-hinging mechanism in steel frames , 2012 .

[3]  G. Erol,et al.  Seismic strengthening of infilled reinforced concrete frames by CFRP , 2016 .

[4]  Brahim Benmokrane,et al.  Guide for the Design and Construction of Structural Concrete Reinforced with FRP Bars , 2006 .

[5]  H. Marzouk,et al.  Tension-stiffening model for FRP-strenghened RC concrete two-way slabs , 2005 .

[6]  Qingfu Zhang,et al.  Multiobjective Optimization Problems With Complicated Pareto Sets, MOEA/D and NSGA-II , 2009, IEEE Transactions on Evolutionary Computation.

[7]  Michael C. Griffith,et al.  Flexural displacement response of NSM FRP retrofitted masonry walls , 2013 .

[8]  Amde M. Amde,et al.  Finite Element Analysis of Infilled Frames , 2002 .

[9]  Baris Binici,et al.  Analysis and design of FRP composites for seismic retrofit of infill walls in reinforced concrete frames , 2007 .

[10]  Guney Ozcebe,et al.  Contribution of Reinforced Concrete Infills to Seismic Behavior of Structural Systems , 2003 .

[11]  Jerome F. Hajjar,et al.  NEHRP Seismic Design Technical Brief No. 8 - Seismic Design of Steel Special Concentrically Braced Frame Systems: A Guide for Practicing Engineers | NIST , 2013 .

[12]  A. Limam,et al.  Out-of-plane behaviour of hollow concrete block masonry walls unstrengthened and strengthened with CFRP composite , 2014 .

[13]  Ö. Anıl,et al.  An experimental study on strengthening of masonry infilled RC frames using diagonal CFRP strips , 2008 .

[14]  Robert Tremblay,et al.  Inelastic seismic response of steel bracing members , 2002 .

[15]  C. Modena,et al.  Shear behavior of masonry panels strengthened by FRP laminates , 2002 .

[16]  Hyo Seon Park,et al.  Multi-objective seismic retrofit method for using FRP jackets in shear-critical reinforced concrete frames , 2014 .

[17]  Wael W. El-Dakhakhni,et al.  THREE-STRUT MODEL FOR CONCRETE MASONRY-INFILLED STEEL FRAMES , 2003 .

[18]  Paulo B. Lourenço,et al.  Numerical modelling and parametric analysis of bond strength of masonry members retrofitted with FRP , 2014 .

[19]  Claudio Modena,et al.  FRP strengthening of steel and steel-concrete composite structures: an analytical approach , 2009 .

[20]  Mahmoud R. Maheri,et al.  Use of steel bracing in reinforced concrete frames , 1997 .

[21]  Muneyoshi Numada,et al.  Seismic response of PP-band and FRP retrofitted house models under shake table testing , 2016 .

[22]  Guney Ozcebe,et al.  Rehabilitation of Reinforced Concrete Frames with Reinforced Concrete Infills , 2004 .

[23]  Bre,et al.  PLASTICITY, COMPOSITE ACTION AND COLLAPSE DESIGN OF UNREINFORCED SHEAR WALL PANELS IN FRAMES. , 1978 .

[24]  Charles W. Roeder,et al.  Seismic Behavior of Concentrically Braced Frame , 1989 .

[25]  Iztok Peruš,et al.  Flexural deformation capacity of rectangular RC columns determined by the CAE method , 2006 .

[26]  Moncef L. Nehdi,et al.  Genetic algorithm model for shear capacity of RC beams reinforced with externally bonded FRP , 2011 .

[27]  David W. Scott,et al.  OUT-OF-PLANE STRENGTHENING OF MASONRY WALLS WITH REINFORCED COMPOSITES , 2001 .

[28]  B. Binici,et al.  ANALYSIS OF INFILLED REINFORCED CONCRETE FRAMES STRENGTHENED WITH FRPS , 2006 .

[29]  Khaled Galal,et al.  Analytical investigation of the seismic performance of RC frames rehabilitated using different rehabilitation techniques , 2009 .

[30]  Hyo Seon Park,et al.  Distributed Hybrid Genetic Algorithms for Structural Optimization on a PC Cluster , 2006 .

[31]  Kalyanmoy Deb,et al.  A fast and elitist multiobjective genetic algorithm: NSGA-II , 2002, IEEE Trans. Evol. Comput..

[32]  H. Adeli,et al.  Concurrent genetic algorithms for optimization of large structures , 1994 .

[33]  Emre Akın,et al.  Effects of Various Parameters on CFRP Strengthening of Infilled RC Frames , 2016 .

[34]  Turan Özturan,et al.  Seismic Strengthening of Infilled Reinforced Concrete Frames with Composite Materials , 2011 .

[35]  Hong Hao,et al.  Damage assessment of masonry infilled RC frames subjected to blasting induced ground excitations , 2002 .

[36]  Keh-Chyuan Tsai,et al.  Retrofit of reinforced concrete frames with buckling‐restrained braces , 2015 .

[37]  Kalyanmoy Deb,et al.  A Fast Elitist Non-dominated Sorting Genetic Algorithm for Multi-objective Optimisation: NSGA-II , 2000, PPSN.

[38]  O. Büyüköztürk,et al.  Quasi-static and pseudo-dynamic testing of infilled RC frames retrofitted with CFRP material , 2011 .