Sub-100 nm metrology using interferometrically produced fiducials

Pattern-placement metrology plays a critical role in nanofabrication. Not far in the future, metrology standards approaching 0.2 nm in accuracy will be required to facilitate the production of 25 nm semiconductor devices. They will also be needed to support the manufacturing of high-density wavelength-division-multiplexed integrated optoelectronic devices. We are developing a new approach to metrology in the sub-100 nm domain that is based on using phase-coherent fiducial gratings and grids patterned by interference lithography. This approach is complementary to the traditional mark-detection, or “market plot” pattern-placement metrology. In this article we explore the limitations of laser-interferometer-based mark-detection metrology, and contrast this with ways that fiducial grids could be used to solve a variety of metrology problems. These include measuring process-induced distortions in substrates; measuring patterning distortions in pattern-mastering systems, such as laser and e-beam writers; and me...

[1]  Mark L. Schattenburg,et al.  Analysis of distortion in interferometric lithography , 1996 .

[2]  Henry I. Smith,et al.  Application of moiré techniques in scanning‐electron‐beam lithography and microscopy , 1975 .

[3]  M. Schattenburg,et al.  100 nm aperture field emitter arrays for low voltage applications , 1998, International Electron Devices Meeting 1998. Technical Digest (Cat. No.98CH36217).

[4]  A. Hawryluk,et al.  Deep-ultraviolet spatial-period division using an excimer laser. , 1982, Optics letters.

[5]  Ryoichi Hirano,et al.  Pattern positioning error of reticle writing induced by reticle clamping , 1995 .

[6]  Philip D. Henshaw,et al.  Real-time stage position measurement with nanometer-scale accuracy , 1997, Advanced Lithography.

[7]  P. Henshaw,et al.  Atmospheric metrology using the air turbulence compensated interferometer , 1996 .

[8]  Mark L. Schattenburg,et al.  Fabrication of 200 nm period nanomagnet arrays using interference lithography and a negative resist , 1999 .

[9]  R. Fabian Pease,et al.  Obtaining a physical two-dimensional Cartesian reference , 1997 .

[10]  Estler Wt,et al.  High-accuracy displacement interferometry in air. , 1985 .

[11]  Thomas E. Murphy,et al.  Fabrication techniques for grating-based optical devices , 1999 .

[12]  Mark L. Schattenburg,et al.  Metrology of electron‐beam lithography systems using holographically produced reference samples , 1991 .

[13]  N Bobroff.  Residual errors in laser interferometry from air turbulence and nonlinearity. , 1987, Applied optics.

[14]  Jun Ye,et al.  Field distortion characterization using linewidth or pitch measurement , 1995 .

[15]  Mark L. Schattenburg,et al.  Nanoscale freestanding gratings for ultraviolet blocking filters , 1998 .

[16]  Mark L. Schattenburg,et al.  Large‐area achromatic interferometric lithography for 100 nm period gratings and grids , 1996 .

[17]  U. Koren,et al.  Advances in near field holographic grating mask technology , 1994 .

[18]  Mark L. Schattenburg,et al.  Fabrication of high-energy x-ray transmission gratings for the Advanced X-ray Astrophysics Facility (AXAF) , 1994, Optics & Photonics.

[19]  Michael R. Raugh.  Two-dimensional stage self-calibration: Role of symmetry and invariant sets of points , 1997 .

[20]  Henry I. Smith,et al.  Scintillating global-fiducial grid for electron-beam lithography , 1998 .