Atmospheric corrosion resistance of electroplated Ni/Ni-P/Au electronic contacts

Abstract Atmospheric corrosion has vast consequences on the reliability of electronic connectors. This study determined the corrosion resistance of Ni/Ni–P plating metallurgy as a function of plating current density and plating thickness. Discrepancy was observed in the neutral salt spray (NSS) and mixed flowing gas (MFG) tests. Thicker Ni–P deposits displayed superior corrosion resistance in MFG tests while thinner Ni–P deposits performed better in NSS tests. This disparity was attributed to the intrinsic corrosion susceptibility of Ni–P against chlorine or sulfur assisted corrosion. Corrosion products were analysed for better understanding of the corrosion mechanism. NSS test produced green corrosion residues consisting of CuCl (nantokite) and CuCl 2 (OH) 3 (clinoatacamite) and brown residues consisting of Cu 2 O (cuprite). MFG test produced sulfides of copper (major) and nickel (minor).

[1]  F. Cui,et al.  Effect of complexing agent on the morphology and microstructure of electroless deposited Ni–P alloy , 2007 .

[2]  Y. H. Wu,et al.  Corrosion characteristics of electroless Ni–P coating in sulfur‐bearing solution , 2009 .

[3]  A. Kirfel,et al.  Accurate structure analysis with synchrotron radiation. The electron density in Al2O3 and Cu2O , 1990 .

[4]  J. Balaraju,et al.  Electroless Ni–P composite coatings , 2003 .

[5]  J. R. Kirby,et al.  Corrosive gas environmental testing for electrical contacts , 1989, Proceedings of the Thirty Fifth Meeting of the IEEE Holm Conference on Electrical Contacts.

[6]  J. Balaraju,et al.  Evaluation of the corrosion resistance of electroless Ni-P and Ni-P composite coatings by electrochemical impedance spectroscopy , 2001 .

[7]  M. Schlesinger,et al.  Fundamentals of Electrochemical Deposition , 1998 .

[8]  Yugui Zheng,et al.  Erosion-Corrosion Behavior of Electroless Ni-P Coating on Copper-Nickel Alloy in 3.5 wt.% Sodium Chloride Solution , 2013, Journal of Materials Engineering and Performance.

[9]  B. R. Lawn.  The thermal expansion of silver iodide and the cuprous halides , 1964 .

[10]  Philip Schweitzer,et al.  Corrosion of Metallic Coatings , 2009 .

[11]  Ashutosh Kumar Singh,et al.  Corrosion and wear resistance study of Ni-P and Ni-P-PTFE nanocomposite coatings , 2011 .

[12]  Gabriele Fumagalli,et al.  Corrosion behaviour of electroless Ni-P coatings in chloride-containing environments , 1989 .

[13]  Ming Li,et al.  Electrodeposition of Palladium Film on Electroless Ni-P Coatings Supported by Si Substrate , 2007, 2007 8th International Conference on Electronic Packaging Technology.

[14]  Uwe Erb,et al.  The effects of grain size and phosphorus on the corrosion of nanocrystalline Ni-P alloys , 1993 .

[15]  P. Engel,et al.  Principles of electronic packaging , 1989 .

[16]  S. P. Pucic.  Diffusion of copper into gold plating , 1993, 1993 IEEE Instrumentation and Measurement Technology Conference.

[17]  Jeff Punch,et al.  Corrosion Resistance of Copper-Coated Contacts , 2006 .

[18]  P. Hall,et al.  Diffusion problems in microelectronic packaging , 1978 .

[19]  R. Taheri,et al.  The tribological characteristics of electroless NiP coatings , 2001 .

[20]  R. A. Edge.  PRACTICAL ASPECTS OF: ELECTROLESS NICKEL PLATING , 1959 .

[21]  Vincenzo Tagliaferri,et al.  Noncrystalline Ni-P Electrodeposits , 1985 .

[22]  A. Sharma,et al.  Electrodeposited nickel–phosphorous (Ni–P) alloy coating: an in-depth study of its preparation, properties, and structural transitions , 2012, Journal of Coatings Technology and Research.

[23]  Jean-Pierre Celis,et al.  NiP electrodeposition on a rotating-disc electrode and in a jet cell : relationship between plating parameters and structural characteristics , 1993 .

[24]  Pierre R. Roberge,et al.  Handbook of Corrosion Engineering , 1999 .

[25]  Zhong Chen,et al.  Multi-layered electroless Ni–P coatings on powder-sintered Nd–Fe–B permanent magnet , 2006 .

[26]  Paul A. Kohl,et al.  Electrodeposition of Gold , 2011 .

[27]  Dominique Thierry,et al.  Accelerated corrosion tests in the automotive industry: A comparison of the performance towards cosmetic corrosion , 2008 .

[28]  Giovanni Zangari,et al.  Corrosion resistance of ternary NiP based alloys in sulfuric acid solutions , 2002 .

[29]  L. F. Garfias‐Mesias,et al.  Accelerated Testing of Electronics to Simulate Long‐Term Worldwide Environments , 2011 .

[30]  T.S.N. Sankara Narayanan,et al.  Deposition of electroless Ni–P graded coatings and evaluation of their corrosion resistance , 2006 .

[31]  J. Crousier,et al.  A cyclic voltammetry study of the NiP electrodeposition , 1993 .

[32]  Jeff Punch,et al.  Study of Mixed Flowing Gas Exposure of Copper , 2008 .

[33]  Bernhard Elsener,et al.  Electroless deposited Ni–P alloys: corrosion resistance mechanism , 2008 .

[34]  J.L. Chao,et al.  Evaluation of a mixed flowing gas test , 1991, Electrical Contacts - 1991 Proceedings of the Thirty-Seventh IEEE HOLM Conference on Electrical Contacts.

[35]  Philip J. Bailey,et al.  Electrochemically Deposited Diffusion Barriers , 1994 .

[36]  Bernhard Elsener,et al.  The corrosion resistance of electroless deposited nano-crystalline Ni-P alloys , 2008 .

[37]  Uziel Landau,et al.  Electrodeposition of Ni‐P Amorphous Alloys Observations Supporting the Indirect Mechanism of Phosphorus Incorporation , 1992 .

[38]  Corrosion Engineering,et al.  Corrosion engineering , 1979 .