Poly(lactic acid)‐based systems filled with talc microparticles: Thermal, structural, and morphological issues

Polylactic acid (PLA)-based composites containing 1, 3, and 5% by weight of talc microparticles were prepared by extrusion and characterized in terms of thermal, structural, and morphological issues. The binary materials were then compared with ternary systems including 5% by weight of a secondary poly(e-caprolactone) phase alongside with the several talc microparticles contents. The presence of talc brings significant increases of the PLA crystalline degree and reductions of PLA crystal sizes mainly in ternary systems, as shown by both calorimetric tests and wide angle x-ray diffraction measurements. Morphological investigations performed by scanning electron microscopy and polarized optical microscopy highlighted the reduction of the mean size of the PCL rich domain by increasing the talc concentration as well as the key role of PCL phase as assisting nucleation agent of the main PLA phase. Furthermore, indirect measurements by creep tests of the heat distortion temperature, have revealed increases of this parameter approximately equal to 110 and 175% with respect to the neat matrix for both binary and ternary compounds containing 3% by weight of talc. POLYM. COMPOS., 35:1093–1103, 2014. © 2013 Society of Plastics Engineers

[1]  Wanxi Zhang,et al.  Rapid crystallization of poly(l-lactic acid) induced by a nanoscaled zinc citrate complex as nucleating agent , 2012 .

[2]  K. Chrissafis,et al.  Can nanoparticles really enhance thermal stability of polymers? Part I: An overview on thermal decomposition of addition polymers , 2011 .

[3]  L. Ambrosio,et al.  Poly(lactic acid)/titanium dioxide nanocomposite films: Influence of processing procedure on dispersion of titanium dioxide and photocatalytic activity , 2011 .

[4]  J. Yeh,et al.  Isothermal crystallization kinetics and crystal structure of poly(lactic acid): Effect of triphenyl phosphate and talc , 2010 .

[5]  Y. Inoue,et al.  Nucleation Enhancement Effect in Poly(l-lactide) (PLLA)/Poly(ϵ-caprolactone) (PCL) Blend Induced by Locally Activated Chain Mobility Resulting from Limited Miscibility , 2009 .

[6]  H. Tsuji,et al.  Biodegradable polyesters as crystallization-accelerating agents of poly(l-lactide). , 2009, ACS applied materials & interfaces.

[7]  H. Tsuji,et al.  Polyglycolide as a Biodegradable Nucleating Agent for Poly(L‐lactide) , 2008 .

[8]  L. Lim,et al.  Processing technologies for poly(lactic acid) , 2008 .

[9]  M. Huneault,et al.  Effect of nucleation and plasticization on the crystallization of poly(lactic acid) , 2007 .

[10]  P. Dubois,et al.  Polylactide compositions. II. Correlation between morphology and main properties of PLA/calcium sulfate composites , 2007 .

[11]  Y. Inoue,et al.  Polymorphous Crystallization and Multiple Melting Behavior of Poly(l-lactide): Molecular Weight Dependence , 2007 .

[12]  M. Misra,et al.  The effect of silane treated-and untreated-talc on the mechanical and physico-mechanical properties of poly(lactic acid)/newspaper fibers/talc hybrid composites , 2007 .

[13]  Amar K. Mohanty,et al.  Effect of the processing methods on the performance of polylactide films: Thermocompression versus solvent casting , 2006 .

[14]  J. Sarasua,et al.  Crystallization, morphology, and mechanical behavior of polylactide/poly(ε‐caprolactone) blends , 2006 .

[15]  D. Pochan,et al.  Crystallization Behavior of Poly(l-lactic acid) Nanocomposites: Nucleation and Growth Probed by Infrared Spectroscopy , 2005 .

[16]  Z. Ishak,et al.  Comparison of the mechanical properties and interfacial interactions between talc, kaolin, and calcium carbonate filled polypropylene composites , 2004 .

[17]  E. Giannelis,et al.  Poly(lactic acid) nanocomposites: comparison of their properties with montmorillonite and synthetic mica (II) , 2003 .

[18]  S. Hyon,et al.  Preparation of Oriented β-Form Poly(l-lactic acid) by Solid-State Coextrusion: Effect of Extrusion Variables , 2003 .

[19]  Ramiro Dell'Erba,et al.  Immiscible polymer blends of semicrystalline biocompatible components: thermal properties and phase morphology analysis of PLLA/PCL blends , 2001 .

[20]  A. Hiltner,et al.  Oxygen barrier properties of crystallized and talc-filled poly(ethylene terephthalate) , 1999 .

[21]  Jen-Ming Yang,et al.  Miscibility and Crystallization of Poly(L-lactide)/Poly(ethylene glycol) and Poly(L-lactide)/Poly(ε-caprolactone) Blends , 1997 .

[22]  J. H. Rayner,et al.  The Crystal Structure of Talc , 1973 .

[23]  M. Wolcott,et al.  Study of biodegradable polylactide/poly(butylene adipate-co-terephthalate) blends. , 2006, Biomacromolecules.

[24]  S. Ray,et al.  New polylactide-layered silicate nanocomposites. 2. Concurrent improvements of material properties, biodegradability and melt rheology , 2003 .

[25]  M. Hartmann.  High Molecular Weight Polylactic Acid Polymers , 1998 .