Effect of bidentate and tridentate additives on the photovoltaic performance and stability of perovskite solar cells

Fabrication of high-quality perovskite films with a large grain size and fewer defects is always crucial to achieve efficient and stable perovskite solar cells (PSCs).

[1]  Nam-Gyu Park,et al.  Highly Reproducible Perovskite Solar Cells with Average Efficiency of 18.3% and Best Efficiency of 19.7% Fabricated via Lewis Base Adduct of Lead(II) Iodide. , 2015, Journal of the American Chemical Society.

[2]  Jie Zhang,et al.  Quantifying interface states and bulk defects in high‐efficiency solution‐processed small‐molecule solar cells by impedance and capacitance characteristics , 2015 .

[3]  B. Dunn,et al.  Tuning Molecular Interactions for Highly Reproducible and Efficient Formamidinium Perovskite Solar Cells via Adduct Approach. , 2018, Journal of the American Chemical Society.

[4]  M. Johnston,et al.  Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells , 2014 .

[5]  Gang Li,et al.  Stable and Efficient Organo‐Metal Halide Hybrid Perovskite Solar Cells via π‐Conjugated Lewis Base Polymer Induced Trap Passivation and Charge Extraction , 2018, Advanced materials.

[6]  Mohammad Khaja Nazeeruddin,et al.  Improved performance and stability of perovskite solar cells by crystal crosslinking with alkylphosphonic acid ω-ammonium chlorides. , 2015, Nature chemistry.

[7]  L. Quan,et al.  Perovskites for Light Emission , 2018, Advanced materials.

[8]  S. Zakeeruddin,et al.  Enhancing Efficiency of Perovskite Solar Cells via N‐doped Graphene: Crystal Modification and Surface Passivation , 2016, Advanced materials.

[9]  Yongzhen Wu,et al.  Vertical recrystallization for highly efficient and stable formamidinium-based inverted-structure perovskite solar cells , 2017 .

[10]  P. Pikhitsa,et al.  Trapped charge-driven degradation of perovskite solar cells , 2016, Nature Communications.

[11]  T. Ma,et al.  Incredible PCE enhancement induced by damaged perovskite layers: deeply understanding the working principle of additives in bulk heterojunction perovskite solar cells , 2018 .

[12]  Yaoguang Rong,et al.  Hole-Conductor-Free Fully Printable Mesoscopic Solar Cell with Mixed-Anion Perovskite CH3NH3PbI(3−x)(BF4)x , 2016 .

[13]  Chi Jung Kang,et al.  Resistive Switching Behavior in Organic–Inorganic Hybrid CH3NH3PbI3−xClx Perovskite for Resistive Random Access Memory Devices , 2015, Advanced materials.

[14]  Jin Huang,et al.  Hydrobromic acid assisted crystallization of MAPbI3−xClx for enhanced power conversion efficiency in perovskite solar cells , 2016 .

[15]  Yue Hu,et al.  Solvent effect on the hole-conductor-free fully printable perovskite solar cells , 2016 .

[16]  He Tian,et al.  Improved Efficiency and Stability of Perovskite Solar Cells Induced by CO Functionalized Hydrophobic Ammonium‐Based Additives , 2018, Advanced materials.

[17]  Alex K.-Y. Jen,et al.  Toward All Room‐Temperature, Solution‐Processed, High‐Performance Planar Perovskite Solar Cells: A New Scheme of Pyridine‐Promoted Perovskite Formation , 2017, Advanced materials.

[18]  Meng-Che Tsai,et al.  Organometal halide perovskite solar cells: degradation and stability , 2016 .

[19]  Leone Spiccia,et al.  A fast deposition-crystallization procedure for highly efficient lead iodide perovskite thin-film solar cells. , 2014, Angewandte Chemie.

[20]  Oleksandr Voznyy,et al.  Perovskite energy funnels for efficient light-emitting diodes. , 2016, Nature nanotechnology.

[21]  C. Ni,et al.  Size dependency of nanocrystalline TiO2 on its optical property and photocatalytic reactivity exemplified by 2-chlorophenol , 2006 .

[22]  Dane W. deQuilettes,et al.  Polymer-modified halide perovskite films for efficient and stable planar heterojunction solar cells , 2017, Science Advances.

[23]  Young Chan Kim,et al.  Compositional engineering of perovskite materials for high-performance solar cells , 2015, Nature.

[24]  Sang Yoon Lee,et al.  Printable organometallic perovskite enables large-area, low-dose X-ray imaging , 2017, Nature.

[25]  Yongli Gao,et al.  Understanding the formation and evolution of interdiffusion grown organolead halide perovskite thin films by thermal annealing , 2014 .

[26]  Anders Hagfeldt,et al.  Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance , 2016, Science.

[27]  T. Noda,et al.  Thermally Stable MAPbI3 Perovskite Solar Cells with Efficiency of 19.19% and Area over 1 cm2 achieved by Additive Engineering , 2017, Advanced materials.

[28]  Jinsong Huang,et al.  Scaling behavior of moisture-induced grain degradation in polycrystalline hybrid perovskite thin films , 2017 .

[29]  E. Castellucci,et al.  IR and Raman spectra of A 2,2′-bipyridine single crystal: internal modes☆ , 1979 .

[30]  Jang‐Sik Lee,et al.  Flexible Hybrid Organic-Inorganic Perovskite Memory. , 2016, ACS nano.

[31]  Tae-Woo Lee,et al.  Planar CH3NH3PbI3 Perovskite Solar Cells with Constant 17.2% Average Power Conversion Efficiency Irrespective of the Scan Rate , 2015, Advanced materials.

[32]  Wei Zhang,et al.  Enhanced optoelectronic quality of perovskite thin films with hypophosphorous acid for planar heterojunction solar cells , 2015, Nature Communications.

[33]  Yongbo Yuan,et al.  Ion Migration in Organometal Trihalide Perovskite and Its Impact on Photovoltaic Efficiency and Stability. , 2016, Accounts of chemical research.

[34]  N. Park,et al.  Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9% , 2012, Scientific Reports.

[35]  S. Zakeeruddin,et al.  A vacuum flash–assisted solution process for high-efficiency large-area perovskite solar cells , 2016, Science.

[36]  Yongbo Yuan,et al.  Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells , 2014, Nature Communications.

[37]  G. Cui,et al.  Methylamine-Gas-Induced Defect-Healing Behavior of CH3NH3PbI3 Thin Films for Perovskite Solar Cells. , 2015, Angewandte Chemie.

[38]  Yang Yang,et al.  Interface engineering of highly efficient perovskite solar cells , 2014, Science.

[39]  Cuiling Zhang,et al.  Thermodynamically Self‐Healing 1D–3D Hybrid Perovskite Solar Cells , 2018 .

[40]  Yuliang Li,et al.  Graphdiyne as a Host Active Material for Perovskite Solar Cell Application. , 2018, Nano letters.

[41]  A. Jen,et al.  Role of chloride in the morphological evolution of organo-lead halide perovskite thin films. , 2014, ACS nano.

[42]  N. Park,et al.  Rear-Surface Passivation by Melaminium Iodide Additive for Stable and Hysteresis-less Perovskite Solar Cells. , 2018, ACS applied materials & interfaces.

[43]  Tao Wang,et al.  Graphene-terpyridine complex hybrid porous material for carbon dioxide adsorption , 2014 .

[44]  Hongzheng Chen,et al.  Orientation Regulation of Phenylethylammonium Cation Based 2D Perovskite Solar Cell with Efficiency Higher Than 11% , 2018 .

[45]  Wei Huang,et al.  Additive engineering for highly efficient organic–inorganic halide perovskite solar cells: recent advances and perspectives , 2017 .

[46]  M. Grätzel,et al.  Sequential deposition as a route to high-performance perovskite-sensitized solar cells , 2013, Nature.

[47]  Kai Zhu,et al.  Suppressing defects through the synergistic effect of a Lewis base and a Lewis acid for highly efficient and stable perovskite solar cells , 2018 .

[48]  B. Jiang,et al.  Carbon Nanodot Additives Realize High‐Performance Air‐Stable p–i–n Perovskite Solar Cells Providing Efficiencies of up to 20.2% , 2018, Advanced Energy Materials.

[49]  T. Hayat,et al.  Promoting perovskite crystal growth to achieve highly efficient and stable solar cells by introducing acetamide as an additive , 2018 .

[50]  H. Tian,et al.  Efficient Passivation of Hybrid Perovskite Solar Cells Using Organic Dyes with COOH Functional Group , 2018 .

[51]  A. Rizzo,et al.  Optical determination of Shockley-Read-Hall and interface recombination currents in hybrid perovskites , 2017, Scientific Reports.

[52]  Tae-Youl Yang,et al.  A fluorene-terminated hole-transporting material for highly efficient and stable perovskite solar cells , 2018, Nature Energy.

[53]  Neha Arora,et al.  Investigation regarding the role of chloride in organic-inorganic halide perovskites obtained from chloride containing precursors. , 2014, Nano letters.

[54]  Sang Il Seok,et al.  Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells. , 2014, Nature materials.

[55]  N. Park,et al.  FA0.88Cs0.12PbI3−x(PF6)x Interlayer Formed by Ion Exchange Reaction between Perovskite and Hole Transporting Layer for Improving Photovoltaic Performance and Stability , 2018, Advanced materials.

[56]  Jinsong Huang,et al.  Grain boundary dominated ion migration in polycrystalline organic–inorganic halide perovskite films , 2016 .

[57]  Dong Uk Lee,et al.  Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells , 2017, Science.

[58]  N. Park,et al.  Simultaneous Improvement of Photovoltaic Performance and Stability by In Situ Formation of 2D Perovskite at (FAPbI3)0.88(CsPbBr3)0.12/CuSCN Interface , 2018 .

[59]  Fan Zuo,et al.  Additive Enhanced Crystallization of Solution‐Processed Perovskite for Highly Efficient Planar‐Heterojunction Solar Cells , 2014, Advanced materials.

[60]  J. Teuscher,et al.  Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites , 2012, Science.

[61]  Guangda Niu,et al.  Cs2AgBiBr6 single-crystal X-ray detectors with a low detection limit , 2017 .

[62]  T. Hayat,et al.  Highly efficient and humidity stable perovskite solar cells achieved by introducing perovskite-like metal formate material as the nanocrystal scaffold , 2018, Journal of Power Sources.

[63]  R. Munir,et al.  Stable High‐Performance Perovskite Solar Cells via Grain Boundary Passivation , 2018, Advanced materials.

[64]  Jinsong Hu,et al.  Additive engineering for high-performance room-temperature-processed perovskite absorbers with micron-size grains and microsecond-range carrier lifetimes , 2017 .

[65]  Jae Bum Jeon,et al.  Antisolvent with an Ultrawide Processing Window for the One‐Step Fabrication of Efficient and Large‐Area Perovskite Solar Cells , 2018, Advanced materials.

[66]  G. Fang,et al.  Effective Carrier‐Concentration Tuning of SnO2 Quantum Dot Electron‐Selective Layers for High‐Performance Planar Perovskite Solar Cells , 2018, Advanced materials.

[67]  Yong‐Young Noh,et al.  Efficiency Exceeding 20% in Perovskite Solar Cells with Side‐Chain Liquid Crystalline Polymer–Doped Perovskite Absorbers , 2018, Advanced Energy Materials.

[68]  N. Park,et al.  Causes and Solutions of Recombination in Perovskite Solar Cells , 2018, Advanced materials.

[69]  Anders Hagfeldt,et al.  Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21% , 2016, Nature Energy.

[70]  David Cahen,et al.  Crystallization of methyl ammonium lead halide perovskites: implications for photovoltaic applications. , 2014, Journal of the American Chemical Society.

[71]  Xingwang Zhang,et al.  Synergistic improvement of perovskite film quality for efficient solar cells via multiple chloride salt additives. , 2018, Science bulletin.

[72]  Jiantie Xu,et al.  Defects in metal triiodide perovskite materials towards high-performance solar cells: origin, impact, characterization, and engineering. , 2018, Chemical Society reviews.

[73]  Nam-Gyu Park,et al.  6.5% efficient perovskite quantum-dot-sensitized solar cell. , 2011, Nanoscale.

[74]  Tsutomu Miyasaka,et al.  Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. , 2009, Journal of the American Chemical Society.