Low-cycle fatigue testing of extruded aluminium alloy buckling-restrained braces

Abstract Aluminium alloys have recently been employed to manufacture buckling-restrained braces (BRBs) with the aim of improving BRB durability in corrosive environments. Based on the ease with which aluminium alloys are extruded, the extruded aluminium alloy BRB is proposed to avoid the welded and relatively complex BRB end used in previous BRB research. This experiment, including 10 nearly identical specimens with or without stoppers, was performed to address low-cycle fatigue performance. According to the test results, the extruded BRB possessed a stable and repeated hysteretic performance, and the fracture location was random in the yielding portion of the brace. The failure of the extruded BRB was regarded as a brittle fracture compared to the typical failure of a steel BRB. The comparison between specimens with and without stoppers showed that the stoppers had no clear influence on the cumulative inelastic deformation, provided that the BRB was horizontally placed and the strain amplitude was lower than 2%. The low-cycle fatigue damage evaluation formula for the extruded BRB is recommended as a reference for strain-based damage assessment.

[1]  A. Abel,et al.  Low cycle fatigue of some aluminum alloys , 1988 .

[2]  Jinkoo Kim,et al.  Seismic design of low-rise steel frames with buckling-restrained braces , 2004 .

[3]  Hanbin Ge,et al.  SEISMIC DEMAND OF BUCKLING-RESTRAINED BRACES INSTALLED IN STEEL ARCH BRIDGES UNDER REPEATED EARTHQUAKES , 2011 .

[4]  Federico M. Mazzolani.  Innovative metal systems for seismic upgrading of RC structures , 2008 .

[5]  Tsutomu Usami,et al.  Developing high‐performance aluminum alloy buckling‐restrained braces based on series of low‐cycle fatigue tests , 2012 .

[6]  Chung-Che Chou,et al.  Subassemblage tests and finite element analyses of sandwiched buckling-restrained braces , 2010 .

[7]  H. D. Solomon,et al.  Low Cycle Fatigue , 1988 .

[8]  Hanbin Ge,et al.  A seismic upgrading method for steel arch bridges using buckling‐restrained braces , 2005 .

[9]  Stephen A. Mahin,et al.  Seismic demands on steel braced frame buildings with buckling-restrained braces , 2003 .

[10]  Zhou Zhen,et al.  A Modified Capacity Spectrum Method with Direct Calculation of Seismic Intensity of Points on Capacity Curve , 2011 .

[11]  F. Mazzolani.  Aluminium Alloy Structures , 1985 .

[12]  Jinkoo Kim,et al.  BEHAVIOR AND DESIGN OF STRUCTURES WITH BUCKLING-RESTRAINED BRACES , 2004 .

[13]  Kuniaki Minami,et al.  A prediction model for extremely low cycle fatigue strength of structural steel , 2007 .

[14]  L. Xue.  A unified expression for low cycle fatigue and extremely low cycle fatigue and its implication for monotonic loading , 2008 .

[15]  R. Ikegami,et al.  The fatigue of aluminum alloys subjected to random loading , 1970 .

[16]  Federico M. Mazzolani,et al.  Experimental tests on pure aluminium shear panels with welded stiffeners , 2008 .

[17]  H. O. Fuchs,et al.  Metal fatigue in engineering , 2001 .

[18]  Tsutomu Usami,et al.  Improving Low-Cycle Fatigue Performance of High-Performance Buckling-Restrained Braces by Toe-Finished Method , 2012 .

[19]  L. P. Borrego,et al.  Analysis of low cycle fatigue in AlMgSi aluminium alloys , 2004 .

[20]  Durgesh C. Rai,et al.  Seismic strengthening of non-ductile reinforced concrete frames using aluminum shear links as energy-dissipation devices , 2010 .