Finite element analysis of ultrasonically assisted turning of Inconel 718

Abstract The paper deals with finite element (FE) modelling of ultrasonically assisted turning (UAT). In this processing technology, high frequency vibration (frequency, f≈20 kHz; amplitude, a≈10 μm) is superimposed on the movement of the cutting tool. Ultrasonic vibration yields for a nickel-base alloy Inconel 718 a decrease in cutting forces and working temperatures as well as a superior surface finish. The developed FE model allows transient, coupled thermomechanical modelling of both ultrasonic and conventional turning (CT) of elasto-plastic materials. The Johnson–Cook material model is adopted for Inconel 718 in simulations. Comparative analyses of temperature distribution in the cutting region and cutting tool are carried out for both turning schemes. Plastic strains during cutting and residual strains in the machined layer are analysed and compared with the results of nanoindentation tests of Inconel 718 specimens processed with and without application of ultrasonic vibration. Overall reduction in cutting forces and temperatures for ultrasonic turning in comparison to conventional turning is explained.

[1]  H. Weber,et al.  Turning of Machinable Glass Ceramics with an Ultrasonically Vibrated Tool , 1984 .

[2]  Fritz Klocke,et al.  Ultrasonic-assisted diamond turning of glass and steel , 2000 .

[3]  Y. Shin,et al.  Thermo-mechanical modeling of orthogonal machining process by finite element analysis , 1999 .

[4]  Vladimir Astashev,et al.  Ultrasonic cutting as a nonlinear (vibro-impact) process , 1998 .

[5]  Toshiyuki Obikawa,et al.  Application of computational machining method to discontinuous chip formation , 1997 .

[6]  G. R. Johnson,et al.  Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures , 1985 .

[7]  John S. Strenkowski,et al.  Finite element models of orthogonal cutting with application to single point diamond turning , 1988 .

[8]  J. Hodowany,et al.  MODELING THE PHYSICS OF METAL CUTTING IN HIGH-SPEED MACHINING , 1998 .

[9]  In-Hyu Choi,et al.  Micro surface phenomenon of ductile cutting in the ultrasonic vibration cutting of optical plastics , 1997 .

[10]  D. Aspinwall,et al.  Workpiece surface integrity considerations when finish turning gamma titanium aluminide , 2001 .

[11]  Eiji Shamoto,et al.  Study on Elliptical Vibration Cutting , 1994 .

[12]  V. Babitsky,et al.  Ultrasonically assisted turning of aviation materials , 2003 .

[13]  Martin Bäker,et al.  A finite element model of high speed metal cutting with adiabatic shearing , 2002 .

[14]  T. I. El-Wardany,et al.  PHYSICS-BASED SIMULATION OF HIGH SPEED MACHINING , 2002 .

[15]  Vadim V. Silberschmidt,et al.  Finite element simulations of ultrasonically assisted turning , 2003 .

[16]  M. Ortiz,et al.  Modelling and simulation of high-speed machining , 1995 .

[17]  Elisabetta Ceretti,et al.  FEM simulation of orthogonal cutting: serrated chip formation , 1999 .

[18]  Jean-Loup Chenot,et al.  NUMERICAL SIMULATION OF CONTINUOUS CHIP FORMATION DURING NON‐STEADY ORTHOGONAL CUTTING , 1993 .

[19]  Zone-Ching Lin,et al.  Three-dimensional elastic–plastic finite element analysis for orthogonal cutting with discontinuous chip of 6-4 brass , 2001 .

[20]  Thomas Childs,et al.  Metal Machining: Theory and Applications , 2000 .

[21]  T. I. El-Wardany,et al.  Cutting temperature of ceramic tools in high speed machining of difficult-to-cut materials , 1996 .

[22]  Toshiyuki Obikawa,et al.  Computational machining of titanium alloy : Finite element modeling and a few results , 1996 .