论文信息 - Circuit model for bulk current injection test on shielded coaxial cables

Circuit model for bulk current injection test on shielded coaxial cables

A SPICE circuit model for the evaluation of the effects of the bulk current injection test on coaxial shielded cables is developed. The proposed equivalent circuits do not need the usual subdivision of the circuits in elementary cells, it is valid in both frequency and time domain and is based on the exact solution of the equations stemming from a lossless transmission line model. The intermediate and final results are validated by means of comparison with others, evaluated by independent methods.

Antonio Orlandi

[1] Clayton R. Paul,et al. Analysis of Multiconductor Transmission Lines , 1994 .

[2] Michel F. Sultan. Modeling of a Bulk Current Injection Setup for Susceptibility Threshold Measurements , 1986, 1986 IEEE International Symposium on Electromagnetic Compatibility.

[3] G. Spadacini,et al. A bulk current injection test conforming to statistical properties of radiation-induced effects , 2004, IEEE Transactions on Electromagnetic Compatibility.

[4] S. Sali,et al. An improved model for the transfer impedance calculations of braided coaxial cables , 1991 .

[5] Giordano Spadacini,et al. The statistical equivalence of Bulk Current Injection and random-field radiation , 2003 .

[6] Edward F. Vance,et al. Coupling to shielded cables , 1978 .

[7] M. Ianoz,et al. EMC Analysis Methods and Computational Models , 1996 .

[8] C. Paul. Introduction to electromagnetic compatibility , 2005 .

[9] Clayton R. Paul. Solution of the transmission-line equations under the weak-coupling assumption , 2002 .

[10] David A. Hill. Currents induced on multiconductor transmission lines by radiation and injection , 1992 .

[11] S. Pignari,et al. Theoretical assessment of bulk current injection versus radiation , 1996 .

[12] T. Kley. Optimized single-braided cable shields , 1993 .