3D-Printed Ready-To-Use Variable-Stiffness Structures

Various physical phenomena have been used to develop variable-stiffness (VS) materials and structures, but all have involved some elements of manual fabrication, which limits their applications. In contrast, here we show fully three-dimensional (3D) printed monolithic VS structures that can be used directly from the printer. Thermally responsive polylactic acid (PLA) and conductive graphene PLA (GPLA) are combined in-printer to deliver a new framework for the temperature-controlled 3D VS structures. The embedded GPLA acts as a heating element, and both it and the surrounding PLA can be transitioned from rigid to soft using simple Joule heating because of the glass transition behavior of PLA. The mechanical and electrical properties of printed composite VS structures are studied. The great potential of this technology is demonstrated in a prototype variable-stiffness orthotic for foot drop.

[1]  D. Floreano,et al.  Variable stiffness material based on rigid low-melting-point-alloy microstructures embedded in soft poly(dimethylsiloxane) (PDMS) , 2013 .

[2]  Patrick T. Mather,et al.  Review of progress in shape-memory polymers , 2007 .

[3]  Donald Russell,et al.  Mechanics and stiffness limitations of a variable stiffness actuator for use in prosthetic limbs , 1999 .

[4]  Karl Iagnemma,et al.  Design and Analysis of a Robust, Low-cost, Highly Articulated manipulator enabled by jamming of granular media , 2012, 2012 IEEE International Conference on Robotics and Automation.

[5]  R. Adam Bilodeau,et al.  Active Variable Stiffness Fibers for Multifunctional Robotic Fabrics , 2016, IEEE Robotics and Automation Letters.

[6]  Jamie Kyujin Paik,et al.  Variable stiffness fabrics with embedded shape memory materials for wearable applications , 2014, 2014 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[7]  J. Stewart,et al.  Foot drop: where, why and what to do? , 2008, Practical Neurology.

[8]  Stephen P. DeWeerth,et al.  Novel Nonlinear Elastic Actuators for Passively Controlling Robotic Joint Compliance , 2007 .

[9]  Bram Vanderborght,et al.  MACCEPA, the mechanically adjustable compliance and controllable equilibrium position actuator: Design and implementation in a biped robot , 2007, Robotics Auton. Syst..

[10]  TonazziniAlice,et al.  Electrorheological Valves for Flexible Fluidic Actuators , 2016 .

[11]  Andres F. Arrieta,et al.  Variable stiffness material and structural concepts for morphing applications , 2013 .

[12]  Joel E. Chestnutt,et al.  An actuator with physically variable stiffness for highly dynamic legged locomotion , 2004, IEEE International Conference on Robotics and Automation, 2004. Proceedings. ICRA '04. 2004.

[13]  Y. Grohens,et al.  Thermo-mechanical characterization of plasticized PLA: Is the miscibility the only significant factor? , 2006 .

[14]  J Dankelman,et al.  Scopes Too Flexible...and Too Stiff , 2010, IEEE Pulse.

[15]  Antonio Bicchi,et al.  Design and Control of a Variable Stiffness Actuator for Safe and Fast Physical Human/Robot Interaction , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[16]  J E Thomas,et al.  Foot drop. , 1969, GP.

[17]  Shaker A. Meguid,et al.  Shape morphing of aircraft wing: Status and challenges , 2010 .

[18]  P. Leva.  Adjustments to Zatsiorsky-Seluyanov's segment inertia parameters. , 1996 .

[19]  J. Rossiter,et al.  McKibben artificial muscle using shape-memory polymer , 2010 .

[20]  Kyle B. Reed,et al.  Knee orthosis with variable stiffness and damping that simulates hemiparetic gait , 2016, 2016 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

[21]  Melek Yalcintas,et al.  Magnetorheological and electrorheological materials in adaptive structures and their performance comparison , 1999 .