The influences of rotational and welding speeds on microstructures and mechanical properties of friction stir welded Al5083 and commercially pure copper sheets lap joints

[1]  Xinqi Yang,et al.  Microstructures and fatigue properties of friction stir lap welds in aluminum alloy AA6061-T6 , 2012 .

[2]  R. Mishra,et al.  Friction stir lap welded advanced high strength steels: Microstructure and mechanical properties , 2011 .

[3]  M. Grujicic,et al.  Statistical Analysis of High-Cycle Fatigue Behavior of Friction Stir Welded AA5083-H321 , 2011 .

[4]  B. Carlson,et al.  Effect of Tool Design and Process Parameters on Properties of Al Alloy 6016 Friction Stir Spot Welds , 2011 .

[5]  X. Li,et al.  Effect of tool geometry and process condition on static strength of a magnesium friction stir lap linear weld , 2011 .

[6]  R. H. Wagoner,et al.  The Mechanism of Grain Coarsening in Friction-Stir-Welded AA5083 after Heat Treatment , 2011 .

[7]  M. Koilraj,et al.  Microstructural characterization of dissimilar friction stir welds between AA2219 and AA5083 , 2010 .

[8]  L. Dubourg,et al.  Process optimisation and mechanical properties of friction stir lap welds of 7075-T6 stringers on 2024-T3 skin , 2010 .

[9]  L. Geng,et al.  Effect of Heat Input Conditions on Microstructure and Mechanical Properties of Friction-Stir-Welded Pure Copper , 2010 .

[10]  Satish V. Kailas,et al.  Optimization of friction stir welding parameters for dissimilar aluminum alloys , 2010 .

[11]  E. Cerri,et al.  Warm and room temperature deformation of friction stir welded thin aluminium sheets , 2010 .

[12]  T. Saeid,et al.  Weldability and mechanical properties of dissimilar aluminum–copper lap joints made by friction stir welding , 2010 .

[13]  Y. Chen,et al.  Effect of tool geometry on microstructure and mechanical properties of friction stir lap welded magnesium alloy and steel , 2009 .

[14]  S. Ko,et al.  Optimum condition by mechanical characteristic evaluation in friction stir welding for 5083-O Al alloy , 2009 .

[15]  L. Fratini,et al.  Friction stir welding of lap joints: Influence of process parameters on the metallurgical and mechanical properties , 2009 .

[16]  K. Nakata,et al.  Microstructural modification and mechanical property improvement in friction stir zone of thixo-molded AE42 Mg alloy , 2009 .

[17]  J. Pan,et al.  Effects of processing time on strengths and failure modes of dissimilar spot friction welds between aluminum 5754-O and 7075-T6 sheets , 2009 .

[18]  Y. Chen,et al.  Microstructural characterization and mechanical properties in friction stir welding of aluminum and titanium dissimilar alloys , 2009 .

[19]  Y. C. Chen,et al.  Effect of the Surface State of Steel on the Microstructure and Mechanical Properties of Dissimilar Metal Lap Joints of Aluminum and Steel by Friction Stir Welding , 2008 .

[20]  Z. Ma,et al.  Effect of initial butt surface on tensile properties and fracture behavior of friction stir welded Al-Zn-Mg-Cu alloy , 2008 .

[21]  Jong-Woong Kim,et al.  Lap joint properties of FSWed dissimilar formed 5052 Al and 6061 Al alloys with different thickness , 2008 .

[22]  Alessandro Pirondi,et al.  Fatigue behaviour of Al2024-T3 friction stir welded lap joints , 2007 .

[23]  Seung-Boo Jung,et al.  Interfacial reaction in steel–aluminum joints made by friction stir welding , 2006 .

[24]  Xinqi Yang,et al.  Effect of kissing bond on fatigue behavior of friction stir welds on Al 5083 alloy , 2006 .

[25]  Radovan Kovacevic,et al.  Microstructural evolution in the friction stir welded 6061 aluminum alloy (T6-temper condition) to copper , 2006 .

[26]  P. Dawson,et al.  Modeling strain hardening and texture evolution in friction stir welding of stainless steel , 2005 .

[27]  K. Suzuki,et al.  Joining of 5083 and 6061 aluminum alloys by friction stir welding , 2003 .

[28]  J. Lyons,et al.  Microstructure and retention of superplasticity of friction stir welded superplastic 2095 sheet , 2002 .

[29]  K. Jata,et al.  Heterogeneity of crystallographic texture in friction stir welds of aluminum , 2001 .

[30]  Syr Hui,et al.  US Patent Application , 2013 .

[31]  A. H. Kokabi,et al.  Mechanical and Microstructural Characterization of Al-5083/St-12 lap joints made by friction stir welding , 2011 .

[32]  L. Ceschini,et al.  Fatigue properties of friction stir welded particulate reinforced aluminium matrix composites , 2010 .

[33]  Mats Ericsson,et al.  Fatigue properties of friction stir overlap welds , 2007 .