Research data supporting "Flow visualisation and modelling of solid soap extrusion"

MATLABFigs.zip contains the MATLAB files for all of the figures which are plots/charts in the manuscript. One can extract the numerical values from the MATLAB .fig file

[1]  J. Bridgwater,et al.  Surface Fracture in Axisymmetric Paste Extrusion: An Experimental Study , 2000 .

[2]  S. L. Rough,et al.  Measurement of the wall slip behaviour of a solid granular soap in ram extrusion , 2018 .

[3]  G. Georgiou,et al.  Numerical study of the combined effects of inertia, slip, and compressibility in extrusion of yield stress fluids , 2014, Rheologica Acta.

[4]  D. Wilson,et al.  Interpretation of Paste Extrusion Data , 1998 .

[5]  E. Mitsoulis,et al.  Slip effects in tapered dies , 2009 .

[6]  Pierre Saramito,et al.  An adaptive finite element method for viscoplastic fluid flows in pipes , 2001 .

[7]  S. L. Rough,et al.  Exploiting the curious characteristics of dense solid-liquid pastes , 2006 .

[8]  S. L. Rough,et al.  A comparison of ram extrusion by single-holed and multi-holed dies for extrusion-spheronisation of microcrystalline-based pastes. , 2011, International journal of pharmaceutics.

[9]  Richard Stainsby,et al.  Pressure loss equations for laminar and turbulent non-newtonian pipe flow , 1998 .

[10]  Christophe Lanos,et al.  Use of ram extruder as a combined rheo-tribometer to study the behaviour of high yield stress fluids at low strain rate , 2012, Rheologica Acta.

[11]  R. M. Nedderman,et al.  Die entry pressure drops in paste extrusion , 1998 .

[12]  C. Macosko,et al.  Comparison of methods to measure yield stress of soft solids , 2010 .

[13]  J. Tsamopoulos,et al.  Steady bubble rise in Herschel–Bulkley fluids and comparison of predictions via the Augmented Lagrangian Method with those via the Papanastasiou model , 2013 .

[14]  J. J. Benbow,et al.  The dependence of output rate on die shape during catalyst extrusion , 1971 .

[15]  D. I. Wilson,et al.  Modelling of paste ram extrusion subject to liquid phase migration and wall friction , 2017 .

[16]  D. J. Horrobin.  Theoretical aspects of paste extrusion , 1999 .

[17]  D. Wilson,et al.  Velocity profiling inside a ram extruder using magnetic resonance (MR) techniques , 2006 .

[18]  J. Piau,et al.  Numerical Simulation of Viscoplastic Fluid Flows Through an Axisymmetric Contraction , 2002 .

[19]  P. Kleinebudde,et al.  Production of pellets via extrusion-spheronisation without the incorporation of microcrystalline cellulose: a critical review. , 2009, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[20]  Ian A. Frigaard,et al.  Numerical solution of duct flows of multiple visco-plastic fluids , 2004 .

[21]  Evan Mitsoulis,et al.  Entry and exit flows of Bingham fluids , 1992 .

[22]  S. Hatzikiriakos,et al.  Paste Extrusion of Polytetrafluoroethylene (PTFE) Fine Powder Resins , 2002 .

[23]  Christopher J. Lawrence,et al.  On the interpretation of orifice extrusion data for viscoplastic materials , 2005 .

[24]  S. L. Rough,et al.  Investigation of static zones and wall slip through sequential ram extrusion of contrasting micro-crystalline cellulose-based pastes , 2015 .

[25]  Christophe Lanos,et al.  Mortar physical properties evolution in extrusion flow , 2007 .

[26]  Howard A. Barnes,et al.  A review of the slip (wall depletion) of polymer solutions, emulsions and particle suspensions in viscometers: its cause, character, and cure , 1996 .

[27]  E. Windhab,et al.  Extrusion of highly unsaturated wet powders: Stress fields in extruder barrels , 2011 .

[28]  E. Mitsoulis,et al.  A simple improved mathematical model for polytetrafluoroethylene (PTFE) paste extrusion , 2013 .

[29]  R. Wildman,et al.  Investigation of paste flow using positron emission particle tracking , 1999 .

[30]  J. Götz,et al.  NMR imaging of pastes in a ram extruder , 1993 .

[31]  T. Papanastasiou.  Flows of Materials with Yield , 1987 .

[32]  D. Wilson,et al.  Modelling of paste flows subject to liquid phase migration , 2007 .

[33]  J. Bridgwater,et al.  The extrusion mechanics of pastes—the influence of paste formulation on extrusion parameters , 1987 .

[34]  Zoe Diana Draelos,et al.  Handbook of Cosmetic Science and Technology , 2002 .