A Novel Ultra-Low Power Two-Terminal Zener voltage Reference

A novel ultra-low power two terminal zener voltage reference is designed and implemented. It realizes the concept of using sub-threshold region of the MOSFET to achieve a very low and stable output voltage within a two terminal circuit topology. This proposed voltage reference was fabricated with Global Foundries 0.18-μm CMOS process, consuming only a very small die area of 0.0009 mm2. Experimental results, carried out on five different silicon samples, explicitly show that it can yield a stable output voltage of 0.22 V at room temperature. It achieves an average temperature coefficient of 6.4 ppm/°C across a wide temperature range from 0°C to 150°C with a standard deviation of 2 ppm/°C. Furthermore, it achieves an ultra-low power consumption of 2 μW. The load regulation is 20 mV/V. This simple and innovative two terminal device can be used to provide a very low and constant voltage difference between any two nodes in an analog circuit.

[1]  M.P. Timko,et al.  A two-terminal IC temperature transducer , 1976, IEEE Journal of Solid-State Circuits.

[2]  G. Palumbo,et al.  A low-voltage low-power voltage reference based on subthreshold MOSFETs , 2003, IEEE J. Solid State Circuits.

[3]  A. Brokaw,et al.  A simple three-terminal IC bandgap reference , 1974 .

[4]  K. Leung,et al.  A sub-1-V 15-ppm/°C CMOS bandgap voltage reference without requiring low threshold voltage device , 2002, IEEE J. Solid State Circuits.

[5]  M. Nishida,et al.  Temperature dependence of MOSFET characteristics in weak inversion , 1977, IEEE Transactions on Electron Devices.

[6]  João Navarro,et al.  A simple CMOS bandgap reference circuit with sub-1-V operation , 2011, 2011 IEEE International Symposium of Circuits and Systems (ISCAS).

[7]  Wing-Hung Ki,et al.  CMOS Bandgap References With Self-Biased Symmetrically Matched Current–Voltage Mirror and Extension of Sub-1-V Design , 2010, IEEE Transactions on Very Large Scale Integration (VLSI) Systems.

[8]  I. Filanovsky,et al.  Mutual compensation of mobility and threshold voltage temperature effects with applications in CMOS circuits , 2001 .

[9]  C. Fiocchi,et al.  Curvature compensated BiCMOS bandgap with 1 V supply voltage , 2001, Proceedings of the 26th European Solid-State Circuits Conference.

[10]  K. Sakui,et al.  A CMOS bandgap reference circuit with sub-1-V operation , 1999 .

[11]  P.R. Gray,et al.  A precision curvature-compensated CMOS bandgap reference , 1983, IEEE Journal of Solid-State Circuits.