Serial siphon valving for centrifugal microfluidic platforms

Today, the focus in microfluidic platforms for diagnostics is on the integration of several analysis steps toward sample-to-answer systems. One of the main challenges to integration is the requirement for serial valving to allow the sequential release of fluids in a temporally and spatially controlled manner. The advantages offered by centrifugal microfluidic platforms make them excellent candidates for integration of biological analysis steps, yet they are limited by the lack of robust serial valving technologies. This is especially true for the majority of centrifugal microfluidic devices that rely on hydrophilic surfaces, where few passive serial valving techniques function reliably. Building on the useful functionality of centrifugal microfluidic siphoning previously shown, a novel serial siphon valve is introduced that relies on multiple, inline siphons to provide for a better controlled, sequential release of fluids. The introduction of this novel concept is followed by an analytical analysis of the device. Proof-of-concept is also demonstrated, and examples are provided to illustrate the range of functionality of the serial siphon valve. The serial siphon is shown to be robust and reproducible, with variability caused by the dependence on contact angle, rotation velocity, and fluidic properties (viz., surface tension) significantly reduced compared to current microfluidic, centrifugal serial valving technologies.

[1]  R. Zengerle,et al.  Integrated siphon-based metering and sedimentation of whole blood on a hydrophilic lab-on-a-disk , 2007, Biomedical microdevices.

[2]  Kuo-Sheng Ma,et al.  Dynamic automated DNA hybridization on a CD (compact disc) fluidic platform , 2006 .

[3]  Marc Madou,et al.  Lab on a CD. , 2006, Annual review of biomedical engineering.

[4]  M. Madou,et al.  Fluorescent ion-selective optode membranes incorporated onto a centrifugal microfluidics platform. , 2002, Analytical chemistry.

[5]  Matthias Geissler,et al.  Oxygen plasma treatment of polystyrene and Zeonor: substrates for adhesion of patterned cells. , 2009, Langmuir : the ACS journal of surfaces and colloids.

[6]  Roland Zengerle,et al.  The centrifugal microfluidic Bio-Disk platform , 2007 .

[7]  M. Madou Fundamentals of microfabrication , 1997 .

[8]  R. Zengerle,et al.  Frequency-dependent transversal flow control in centrifugal microfluidics. , 2005, Lab on a chip.

[9]  D. Beebe,et al.  Physics and applications of microfluidics in biology. , 2002, Annual review of biomedical engineering.

[10]  Shengnian Wang,et al.  Design of a compact disk-like microfluidic platform for enzyme-linked immunosorbent assay. , 2004, Analytical chemistry.

[11]  Helene Dérand,et al.  Stability of polycarbonate and polystyrene surfaces after hydrophilization with high intensity oxygen RF plasma. , 2002, Journal of colloid and interface science.

[12]  Marc J Madou,et al.  A low-cost, disposable card for rapid polymerase chain reaction. , 2007, Colloids and surfaces. B, Biointerfaces.

[13]  Marc Madou,et al.  Microfluidic device for rapid (<15 min) automated microarray hybridization. , 2005, Clinical chemistry.

[14]  J. Kang,et al.  How the capillary burst microvalve works. , 2007, Journal of colloid and interface science.

[15]  Marc Madou,et al.  A novel, compact disk-like centrifugal microfluidics system for cell lysis and sample homogenization. , 2007, Colloids and surfaces. B, Biointerfaces.

[16]  Jerry M Chen,et al.  Analysis and experiment of capillary valves for microfluidics on a rotating disk , 2008 .

[17]  Roland Zengerle,et al.  Microfluidic platforms for lab-on-a-chip applications. , 2007, Lab on a chip.

[18]  Yoon-Kyoung Cho,et al.  One-Step Pathogen Specific DNA Extraction from Whole Blood on a Centrifugal Microfluidic Device , 2007 .

[19]  Joe T. Lin,et al.  Microfabricated Centrifugal Microfluidic Systems: Characterization and Multiple Enzymatic Assays , 1999 .