论文信息 - Impulse Exciter of Rotating Blades With an Increased Excitation Force

Impulse Exciter of Rotating Blades With an Increased Excitation Force

This paper deals with electromagnetic vibration excitation of rotating machine blades in a purpose of dynamic measurement and testing. A novel method for increasing the excitation force is presented. At the same time, the suggested method allows to reduce blade remanent induction. Examples of measurements are shown, and obtained results are discussed.

Pavel Prochazka

[1] K. P. S. Rana,et al. A Novel Technique for Acquisition and Presentation of Complex Vibration Waveforms , 2010, IEEE Transactions on Instrumentation and Measurement.

[2] Yu Fang,et al. Design and simulation of gas turbine blade fatigue testing rig driven by electric magnet , 2017, 2017 IEEE International Conference on Mechatronics and Automation (ICMA).

[3] Giuseppe Ferri,et al. Vibration Damping Using CCII-Based Inductance Simulators , 2008, IEEE Transactions on Instrumentation and Measurement.

[4] Oscar Ray Moreno. Investigation and development of oil-injection nozzles for high-cycle fatigue rotor spin test , 2005 .

[5] Tadashi Tanuma,et al. Advances in Steam Turbines for Modern Power Plants , 2017 .

[6] Pavel Prochazka,et al. New methods of non-contact sensing of blade vibrations and deflections in turbomachinery , 2013, 2013 IEEE International Instrumentation and Measurement Technology Conference (I2MTC).

[7] Luděk Pešek,et al. EXCITATION OF BLADE VIBRATION UNDER ROTATION BY SYNCHRONOUS ELECTROMAGNET , 2011 .

[8] Runjie Shen,et al. Closed-Double-Magnetic Circuit for a Long-Stroke Horizontal Electromagnetic Vibration Exciter , 2013, IEEE Transactions on Magnetics.

[9] Mehmet Imregun,et al. A Survey of Blade Tip-Timing Measurement Techniques for Turbomachinery Vibration , 1998 .

[10] Gert Raubenheimer,et al. Vibration excitation of axial compressor rotorblades , 2011 .