A Peierls criterion for the onset of deformation twinning at a crack tip

A criterion for the onset of deformation twinning (DT) is derived within the Peierls framework for dislocation emission from a crack tip due to Rice (J. Mech. Phys. Solids 40(2) (1992) 239). The critical stress intensity factor (SIF) is obtained for nucleation of a two-layer microtwin, which is taken to be a precursor to DT. The nucleation of the microtwin is controlled by the unstable twinning energyγut, a new material parameter identified in the analysis. γut plays the same role for DT as γus, the unstable stacking energy introduced by Rice, plays for dislocation emission. The competition between dislocation emission and DT at the crack tip is quantified by the twinning tendencyT defined as the ratio of the critical SIFs for dislocation nucleation and microtwin formation. DT is predicted when T>1 and dislocation emission when T<1. For the case where the external loading is proportional to a single load parameter, T is proportional to . The predictions of the criterion are compared with atomistic simulations for aluminum of Hai and Tadmor (Acta Mater. 51 (2003) 117) for a number of different crack configurations and loading modes. The criterion is found to be qualitatively exact for all cases, predicting the correct deformation mode and activated slip system. Quantitatively, the accuracy of the predicted nucleation loads varies from 5% to 56%. The sources of error are known and may be reduced by appropriate extensions to the model.

[1]  M. Yoo.  Twinning and mechanical behavior of titanium aluminides and other intermetallics , 1998 .

[2]  James B. Adams,et al.  Interatomic Potentials from First-Principles Calculations: The Force-Matching Method , 1993, cond-mat/9306054.

[3]  M. Ortiz,et al.  Quasicontinuum analysis of defects in solids , 1996 .

[4]  J. Hirth,et al.  Deformation twinning in high-hydrogen-solubility refractory alloy crystals , 1993 .

[5]  M. Baskes,et al.  Semiempirical, Quantum Mechanical Calculation of Hydrogen Embrittlement in Metals , 1983 .

[6]  Michael Ortiz,et al.  Quasicontinuum simulation of fracture at the atomic scale , 1998 .

[7]  A. Deruyttere,et al.  LXX. The markings in the cleavage surfaces of zinc single crystals , 1954 .

[8]  A. S. Argon,et al.  Topics in fracture and fatigue , 1992 .

[9]  Qizhi Chen,et al.  Failure modes after exhaustion of dislocation glide ability in thin crystals , 1999 .

[10]  R. Peierls.  The size of a dislocation , 1940 .

[11]  E. Kaxiras,et al.  Generalized-stacking-fault energy surface and dislocation properties of aluminum , 1999, cond-mat/9903440.

[12]  M. Yoo.  Slip, twinning, and fracture in hexagonal close-packed metals , 1981 .

[13]  V. Vítek,et al.  Intrinsic stacking faults in body-centred cubic crystals , 1968 .

[14]  Ellad B. Tadmor,et al.  Deformation twinning at aluminum crack tips , 2003 .

[15]  James R. Rice,et al.  Dislocation Nucleation from a Crack Tip" an Analysis Based on the Peierls Concept , 1991 .

[16]  E. Kaxiras,et al.  Ledge effects on dislocation emission from a crack tip : a first-principles study for silicon , 1996 .

[17]  B. Bilby,et al.  LXXI. The formation of twins by a moving crack , 1954 .

[18]  J. Rice,et al.  Peierls Framework for Dislocation Nucleation from a Crack Tip , 1992 .

[19]  M. Ortiz,et al.  An adaptive finite element approach to atomic-scale mechanics—the quasicontinuum method , 1997, cond-mat/9710027.

[20]  A. Evans,et al.  TWIN TOUGHENING IN TITANIUM ALUMINIDE , 1991 .

[21]  J. Rice.  A path-independent integral and the approximate analysis of strain , 1968 .

[22]  Jens Lothe John Price Hirth,et al.  Theory of Dislocations , 1968 .

[23]  J. Rice,et al.  Estimates from atomic models of tension-shear coupling in dislocation nucleation from a crack tip , 1993 .

[24]  T. Šmida,et al.  Deformation twins: probable inherent nuclei of cleavage fracture in ferritic steels , 2002 .

[25]  M. Payne,et al.  Stacking fault energies in aluminium , 1992 .

[26]  S. Suresh.  Fatigue of materials , 1991 .

[27]  G. Beltz,et al.  Dislocation nucleation from a crack tip: A formulation based on anisotropic elasticity , 1994 .

[28]  Ricardo A. Lebensohn,et al.  A study of the stress state associated with twin nucleation and propagation in anisotropic materials , 1993 .

[29]  P. Gumbsch,et al.  A quantum mechanical calculation of the theoretical strength of metals , 1991 .

[30]  C. Reid.  The association of twinning and fracture in bcc metals , 1981 .

[31]  M. Baskes,et al.  An atomic model of crack tip deformation in aluminum using an embedded atom potential , 1990 .