Advanced Engineering Ceramics

Progress reports are a new type of article in Advanced Engineering Materials, dealing with the hottest current topics, and providing readers with a critically selected overview of important progress in these fields. It is not intended that the articles be comprehensive, but rather insightful, selective, critical, opinionated, and even visionary. We have approached scientists we believe are at the very forefront of these fields to contribute the articles, which will appear on an annual basis. The article below describes the latest advances in Advanced Engineering Ceramics.

[1]  C. Gigola,et al.  NO decomposition and NO reduction by CO over Pd/α-Al2O3 , 1999 .

[2]  S. Kanzaki,et al.  Fracture Resistance Behavior of Highly Anisotropic Silicon Nitride , 1995 .

[3]  R. Janssen,et al.  Synthesis of Aluminide–Alumina Composites by Reactive Squeeze Casting , 2000 .

[4]  Guo‐Jun Zhang,et al.  Bulk alumina support with high tolerant strain and its reinforcing mechanisms , 2001 .

[5]  Peter E. D. Morgan,et al.  New Uniformly Porous CaZrO3/MgO Composites with Three‐Dimensional Network Structure from Natural Dolomite , 2004 .

[6]  Masayoshi Ohashi,et al.  Processing Strategy for Producing Highly Anisotropic Silicon Nitride , 1995 .

[7]  C. Niemeyer.  REVIEW Nanoparticles, Proteins, and Nucleic Acids: Biotechnology Meets Materials Science , 2022 .

[8]  Guo‐Jun Zhang,et al.  In Situ Reaction Synthesis of Silicon Carbide–Boron Nitride Composites , 2004 .

[9]  Guo‐Jun Zhang,et al.  High‐Surface‐Area Alumina Ceramics Fabricated by the Decomposition of Al(OH)3 , 2001 .

[10]  S. Kanzaki,et al.  Fracture Energy of an Aligned Porous Silicon Nitride , 2004 .

[11]  M. Modesti,et al.  Silicon Oxycarbide Foams from a Silicone Preceramic Polymer and Polyurethane , 1999 .

[12]  M. Scheffler,et al.  Conductive Ceramic Foams from Preceramic Polymers , 2004 .

[13]  T. Ohji,et al.  High-strength porous silicon nitride fabricated by the sinter-forging technique , 2001 .

[14]  T. Ohji,et al.  Improved creep resistance in anisotropic silicon nitride , 2001 .

[15]  T. Ohji,et al.  Superplastic Sinter-Forging of Silicon Nitride with Anisotropic Microstructure Formation , 1999 .

[16]  Peter Greil,et al.  Biomorphic Cellular Silicon Carbide Ceramics from Wood: I. Processing and Microstructure , 1998 .

[17]  D. Lewis,et al.  In Situ Reaction of B2O3 with AlN and/or Si3N4 to Form BN‐Toughened Composites , 1988 .

[18]  Y. Choa,et al.  Microstructure and Mechanical Properties of Sinter–Post‐HIPed Si3N4–SiC Composites , 2004 .

[19]  Martin Sternitzke,et al.  Structural ceramic nanocomposites , 1997 .

[20]  G. Emig,et al.  Kinetics and mechanism of the reduction of nitric oxides by H2 under lean-burn conditions on a Pt–Mo–Co/α-Al2O3 catalyst , 1998 .

[21]  T. Ohji,et al.  Strengthening of Porous Alumina by Pulse Electric Current Sintering and Nanocomposite Processing , 2004 .

[22]  P. Becher.  Microstructural design of toughened ceramics , 1991 .

[23]  P. Greil.  Biomorphous ceramics from lignocellulosics , 2001 .

[24]  Jackie Y. Ying,et al.  Reverse microemulsion synthesis of nanostructured complex oxides for catalytic combustion , 2000, Nature.

[25]  Guo‐Jun Zhang,et al.  Reaction mechanism and microstructure development of strain tolerant in situ SiC-BN composites , 2001 .

[26]  K. Niihara.  New Design Concept of Structural Ceramics , 1991 .

[27]  Guo‐Jun Zhang,et al.  Effect of BN content on elastic modulus and bending strength of SiC-BN in situ composites , 1999 .