Unstabilized Rammed Earth: Characterization of Material Collected from Old Constructions in South Portugal and Comparison to Normative Requirements

Unstabilized rammed earth is a recyclable, economical, and eco-friendly building material, used in the past and still applied today. Traditionally, its use was based on a long empirical knowledge of the local materials. Because this knowledge was mostly lost or is no longer sufficient, in many countries normative documents have been produced to allow the assessment of rammed earth soils. With the aim of contributing for a refining of these normative requirements, this article presents a research work that included: (i) collection of Unstabilized rammed earth samples from six constructions in Portugal; (ii) a literature survey of normative and complementary documents to identify the most mentioned key-properties, the test procedures and the corresponding threshold limits; and (iii) a discussion of the test procedures and of the thresholds limits in the light of the experimental results. The analyzed properties are the particle size distribution, maximum particle size, plasticity, compaction, linear shrinkage, organic content, and salt content. The work highlights the advantages of taking into account the characteristics of existing constructions as a basis for the establishment and further refining of consistent threshold values. In particular, it shows that it is essential to adjust the requirements to the specificities of local materials.

[1]  Teresa Diaz Gonçalves,et al.  Salt crystallization in plastered or rendered walls , 2007 .

[2]  M. R. Hall,et al.  Analysis of the hygrothermal functional properties of stabilised rammed earth materials , 2009 .

[3]  Konrad Zehnder,et al.  Crystal growth in salt efflorescence , 1989 .

[4]  Peter Walker Rammed Earth: Design and Construction Guidelines , 2010 .

[5]  T. Diaz Gonçalves,et al.  Evaluating the salt content of salt-contaminated samples on the basis of their hygroscopic behavior. Part I: Fundamentals, scope and accuracy of the method , 2006 .

[6]  S. Esterby American Society for Testing and Materials , 2006 .

[7]  Martin Kilpatrick,et al.  Electrolyte Solutions. The Measurement and Interpretation of Conductance, Chemical Potential and Diffusion in Solutions of Simple Electrolytes. , 1960 .

[8]  Michael Steiger,et al.  Special issue on salt decay , 2007 .

[9]  Matthew R. Hall,et al.  RAMMED EARTH SAMPLE PRODUCTION: CONTEXT, RECOMMENDATIONS AND CONSISTENCY , 2004 .

[10]  CLAY MINERALS,et al.  Clay Minerals , 2004 .

[11]  J. Morel,et al.  Durability of rammed earth walls exposed for 20 years to natural weathering , 2009 .

[12]  Peter Walker,et al.  The Australian Earth Building Handbook , 2002 .

[13]  M. Carmen Jiménez Delgado,et al.  The selection of soils for unstabilised earth building: A normative review , 2007 .

[14]  J. Cid,et al.  Las normativas de construcción con tierra en el mundo , 2011 .

[15]  T. Diaz Gonçalves,et al.  Evaluating the salt content of salt-contaminated samples on the basis of their hygroscopic behaviour: Part II: experiments with nine common soluble salts , 2006 .

[16]  R. J. Schaffer,et al.  The Weathering of Natural Building Stones , 2013 .

[17]  Peter Walker,et al.  A Review of Rammed Earth Construction , 2003 .

[18]  Laurence Keefe,et al.  Earth Building: Methods and Materials, Repair and Conservation , 2005 .

[19]  Marcel Bauer,et al.  Earth Construction A Comprehensive Guide , 2016 .

[20]  R. L. Patty,et al.  Rammed Earth Walls for Farm Buildings , 1945 .

[21]  M. R. Hall,et al.  Moisture ingress in rammed earth: Part 1—the effect of soil particle-size distribution on the rate of capillary suction , 2004 .