In situ atomic force microscopy nanoindentation of lithiated silicon nanopillars for lithium ion batteries

Abstract In this study, atomic force microscopy based nanoindentation techniques are used to measure the in situ mechanical properties of thin film, nanometer sized amorphous-silicon nanopillars (pillar diameters of 1000 nm, 500 nm, and 200 nm) at various stages of lithiation. The pillar indentation modulus and hardness are measured ex situ as-fabricated, in situ during lithiation at two different potentials (or stages of lithiation, 50 mV and 10 mV), and in situ after delithiation at 2 V. The measured modulus of the pristine amorphous silicon nanopillars was 74.7 ± 12.1 GPa. The hardness of the pristine pillars depended on depth and the contact conditions. In general, the mechanical properties of the nanopillars decreased with increased degrees of lithiation and only partially recovered upon delithiation. The inability of the silicon to recover the as fabricated mechanical properties indicates overall degradation of the pillar during only one lithiation–delithiation cycle, which could only be directly measured in situ using the employed atomic force microscopy based technique.

[1]  Quinn P. McAllister,et al.  In situ atomic force microscopy of lithiation and delithiation of silicon nanostructures for lithium ion batteries. , 2013, ACS nano.

[2]  Pradeep R. Guduru,et al.  In situ measurement of biaxial modulus of Si anode for Li-ion batteries , 2010 .

[3]  Fredrik J. Lindgren,et al.  Nanosilicon Electrodes for Lithium-Ion Batteries: Interfacial Mechanisms Studied by Hard and Soft X-ray Photoelectron Spectroscopy , 2012 .

[4]  Chunsheng Wang,et al.  Nano- and bulk-silicon-based insertion anodes for lithium-ion secondary cells , 2007 .

[5]  Otto Zhou,et al.  Alloy Formation in Nanostructured Silicon , 2001 .

[6]  Quinn P. McAllister,et al.  Nonlinear indentation of fibers , 2012 .

[7]  John G. Ekerdt,et al.  Structure and Properties of Li―Si Alloys: A First-Principles Study , 2011 .

[8]  P. Novák,et al.  Electrochemical SPM investigation of the solid electrolyte interphase film formed on HOPG electrodes , 2000 .

[9]  Yue Qi,et al.  Elastic softening of amorphous and crystalline Li–Si Phases with increasing Li concentration: A first-principles study , 2010 .

[10]  Quinn Patrick McAllister.  The energy dissipative mechanisms of the particle-fiber interface in a textile composite , 2013 .

[11]  G. Palmese,et al.  Relating elastic modulus to indentation response using atomic force microscopy , 1997 .

[12]  Kevin W. Eberman,et al.  Colossal Reversible Volume Changes in Lithium Alloys , 2001 .

[13]  Yu‐Guo Guo,et al.  Electrospun silicon nanoparticle/porous carbon hybrid nanofibers for lithium-ion batteries. , 2013, Small.

[14]  A. Kushima,et al.  Quantitative fracture strength and plasticity measurements of lithiated silicon nanowires by in situ TEM tensile experiments. , 2012, ACS nano.

[15]  Oliver Kraft,et al.  In situ cycling and mechanical testing of silicon nanowire anodes for lithium-ion battery applications , 2012 .

[16]  M. Armand,et al.  Issues and challenges facing rechargeable lithium batteries , 2001, Nature.

[17]  Xiangwu Zhang,et al.  Aligned Carbon Nanotube‐Silicon Sheets: A Novel Nano‐architecture for Flexible Lithium Ion Battery Electrodes , 2013, Advanced materials.

[18]  Candace K. Chan,et al.  High-performance lithium battery anodes using silicon nanowires. , 2008, Nature nanotechnology.

[19]  Hong Li,et al.  Direct observation of inhomogeneous solid electrolyte interphase on MnO anode with atomic force microscopy and spectroscopy. , 2012, Nano letters.

[20]  Mark N. Obrovac,et al.  Reversible Cycling of Crystalline Silicon Powder , 2007 .

[21]  J. Cho,et al.  Electrochemical properties of Si/(FeSiB) anode materials prepared by high-energy mechanical milling , 2013 .

[22]  Shaoxing Qu,et al.  An analytical expression for the stress field around an elastoplastic indentation/contact , 2007 .

[23]  Yi Cui,et al.  In situ TEM of two-phase lithiation of amorphous silicon nanospheres. , 2013, Nano letters.

[24]  T. Kyotani,et al.  Fast and reversible lithium storage in a wrinkled structure formed from Si nanoparticles during lithiation/delithiation cycling , 2013 .

[25]  G. Yushin,et al.  Ex-situ depth-sensing indentation measurements of electrochemically produced Si-Li alloy films , 2011 .

[26]  Matthew J. Hagon,et al.  Measuring tip shape for instrumented indentation using atomic force microscopy , 2005 .

[27]  J. Tarascon,et al.  Searching for new anode materials for the Li-ion technology: time to deviate from the usual path , 2001 .

[28]  R. C. Picu,et al.  Mechanical testing of isolated amorphous silicon slanted nanorods. , 2005, Journal of nanoscience and nanotechnology.

[29]  R. C. Picu,et al.  Mechanics of patterned helical Si springs on Si substrate. , 2003, Journal of nanoscience and nanotechnology.

[30]  J. Cho,et al.  Nanocomposite Si/(NiTi) anode materials synthesized by high-energy mechanical milling for lithium-ion rechargeable batteries , 2013 .

[31]  Robert Kostecki,et al.  In situ AFM studies of SEI formation at a Sn electrode , 2009 .

[32]  Michael V. Swain,et al.  A simple predictive model for spherical indentation , 1993 .

[33]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[34]  S. T. Picraux,et al.  Reversible nanopore formation in Ge nanowires during lithiation-delithiation cycling: an in situ transmission electron microscopy study. , 2011, Nano letters.

[35]  M. Inaba,et al.  Atomic force microscopy study on the stability of a surface film formed on a graphite negative electrode at elevated temperatures. , 2004, Langmuir : the ACS journal of surfaces and colloids.