A MEMS conical spring actuator array

A new MEMS conical spring actuator array is proposed. Previously, we have developed conical spring microactuators having a long stroke (180 /spl mu/m) in the out-of-plane direction. However, the maximum output force and the packing density were not satisfactory. In the present paper, mechanical and electrical models of a conical spring are described for the calculation of the maximum output force and the driving voltage. Geometrical parameters were optimized using these models and a new geometry for the actuator was derived. The new geometry incorporates a wider and thicker spring that increased the maximum output force from 0.087 mN up to 0.83 mN. The packing density was increased up to 1 actuator/mm/sup 2/ using an additional interconnect layer. In addition, the driving voltage was decreased using a thinner insulating layer. The use of an ac drive prevented the sticking of the actuator during operation. A detailed investigation of the ac drive was also performed.

[1]  R. Parker,et al.  Permanent Magnets and Their Applications , 1962 .

[2]  R.T. Chen,et al.  A high-speed low-voltage stress-induced micromachined 2 x 2 optical switch , 1999, IEEE Photonics Technology Letters.

[3]  David Elata,et al.  An efficient DIPIE algorithm for CAD of electrostatically actuated MEMS devices , 2002 .

[4]  Akira Shimokohbe,et al.  On-Chip Variable Inductor Using MEMS Technology , 2002 .

[5]  T. Distefano.  Dielectric breakdown induced by sodium in MOS structures , 1973 .

[6]  Akira Shimokohbe,et al.  Fabrication and evaluation of an on-chip micro-variable inductor , 2003 .

[7]  Dirk De Bruyker,et al.  A novel external electrode configuration for the electrostatic actuation of MEMS based devices , 2004 .

[8]  Ih-Chin Chen,et al.  Electrical breakdown in thin gate and tunneling oxides , 1985 .

[9]  S. Holland,et al.  A quantitative physical model for time-dependent breakdown in SiO2 , 1985, 23rd International Reliability Physics Symposium.

[10]  E. Harari.  Dielectric breakdown in electrically stressed thin films of thermal SiO2 , 1978 .

[11]  K. J. Gabriel,et al.  Design, fabrication, and operation of submicron gap comb-drive microactuators , 1992 .

[12]  Akira Shimokohbe,et al.  Microforming of three-dimensional microstructures from thin-film metallic glass , 2003 .

[13]  J. T. Law.  The Adsorption of Water Vapor on Germanium and Germanium Dioxide , 1955 .

[14]  Bin Yuan,et al.  New test structures and techniques for measurement of mechanical properties of MEMS materials , 1996, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

[15]  A. Inoue.  Stabilization of metallic supercooled liquid and bulk amorphous alloys , 2000 .

[16]  Akira Shimokohbe,et al.  On-Chip Variable Inductor Using Microelectromechanical Systems Technology , 2003 .

[17]  Khalil Najafi,et al.  Vertical comb array microactuators , 1995 .

[18]  Bernhard E. Boser,et al.  Charge control of parallel-plate, electrostatic actuators and the tip-in instability , 2003 .

[19]  D. Schroder.  Semiconductor Material and Device Characterization , 1990 .

[20]  Akira Shimokohbe,et al.  Integrated conical spring linear actuator , 2003 .

[21]  Hongrui Jiang,et al.  Integrated polysilicon and DRIE bulk silicon micromachining for an electrostatic torsional actuator , 1999 .

[22]  Akira Shimokohbe,et al.  Thermal, Mechanical and Electrical Properties of Pd-Based Thin-Film Metallic Glass , 2001 .

[23]  William C. Tang,et al.  Laterally Driven Polysilicon Resonant Microstructures , 1989 .

[24]  Ramamoorthy Ramesh,et al.  Thin Film Ferroelectric Materials and Devices , 1997 .

[25]  Michael Curt Elwenspoek,et al.  Active joints for microrobot limbs , 1992 .

[26]  K. Kamiyoshi,et al.  Dielectric Dispersion of Water Vapor Adsorbed on Silica Gel , 1953 .