Microfabrication of 3D silicon MEMS structures using gray-scale lithography and deep reactive ion et

Micromachining arbitrary 3D silicon structures for micro-electromechanical systems can be accomplished using gray-scale lithography along with dry anisotropic etching. In this study, we have investigated the use of deep reactive ion etching (DRIE) and the tailoring of etch selectivity for precise fabrication. Silicon loading, the introduction of an O 2 step, wafer electrode power, and wafer temperature are evaluated and determined to be effective for coarsely controlling etch selectivity in DRIE. The non-uniformity and surface roughness characteristics are evaluated and found to be scaled by the etch selectivity when the 3D profile is transferred into the silicon. A micro-compressor is demonstrated using gray-scale lithography and DRIE showing that etch selectivity can be successfully tailored for a specific application. © 2004 Elsevier B.V. All rights reserved.

[1]  D C O'Shea,et al.  Gray-scale masks for diffractive-optics fabrication: II. Spatially filtered halftone screens. , 1995, Applied optics.

[2]  Hans Joachim Quenzer,et al.  Microfabrication of complex surface topographies using grey-tone lithography , 1995 .

[3]  Zheng Cui,et al.  Coding gray-tone mask for refractive microlens fabrication , 2000 .

[4]  J. Lang,et al.  An electrostatic induction micromotor supported on gas-lubricated bearings , 2001, Technical Digest. MEMS 2001. 14th IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.01CH37090).

[5]  Guy Voirin,et al.  One-step 3D shaping using a gray-tone mask for optical and microelectronic applications , 1994 .

[6]  K. Najafi,et al.  Fabrication of out-of-plane curved surfaces in Si by utilizing RIE lag , 2002, Technical Digest. MEMS 2002 IEEE International Conference. Fifteenth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.02CH37266).

[7]  D C O'Shea,et al.  Gray-scale masks for diffractive-optics fabrication: I. Commercial slide imagers. , 1995, Applied optics.

[8]  Reza Ghodssi,et al.  Investigation of gray-scale technology for large area 3D silicon MEMS structures , 2003 .

[9]  Jun Yao,et al.  New method to design halftone mask for the fabrication of continuous microrelief structure , 1999, Design, Test, Integration, and Packaging of MEMS/MOEMS.

[10]  Alan H. Epstein,et al.  Tailoring etch directionality in a deep reactive ion etching tool , 2000 .

[11]  J. O. Mur-Miranda,et al.  Power MEMS and microengines , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[12]  Tarik Bourouina,et al.  Fabrication of a gray-tone mask and pattern transfer in thick photoresists , 1998 .

[13]  P. Renaud,et al.  Combining microstereolithography and thick resist UV lithography for 3D microfabrication , 1998, Proceedings MEMS 98. IEEE. Eleventh Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems (Cat. No.98CH36176.

[14]  G.-A. Racine,et al.  Microfabrication of 3D multidirectional inclined structures by UV lithography and electroplating , 1994, Proceedings IEEE Micro Electro Mechanical Systems An Investigation of Micro Structures, Sensors, Actuators, Machines and Robotic Systems.

[15]  D W Prather,et al.  Photoresist characterization and linearization procedure for the gray-scale fabrication of diffractive optical elements. , 2001, Applied optics.