Impact of the injector design on the combustion noise of gasoline partially premixed combustion in a 2-stroke engine
暂无分享,去创建一个
Ricardo Novella | Alberto Broatch | X. Margot | Josep Gomez-Soriano | R. Novella | A. Broatch | X. Margot | J. Gomez-Soriano
[1] G. G. Stokes. "J." , 1890, The New Yale Book of Quotations.
[2] T. Priede,et al. ORIGINS OF DIESEL ENGINE NOISE , 1959 .
[3] R. Hickling,et al. Knock‐induced cavity resonances in open chamber diesel engines , 1979 .
[4] D. Anderton,et al. Relation Between Combustion System and Engine Noise , 1979 .
[5] J. Dukowicz. A particle-fluid numerical model for liquid sprays , 1980 .
[6] S. Orszag,et al. Renormalization group analysis of turbulence. I. Basic theory , 1986 .
[7] Kazuhide Ohta,et al. Piston slap induced noise and vibration of internal combustion engines (1st Report, Theoretical Analysis and Simulation) , 1987 .
[8] L. Folinsbee. Human health effects of air pollution. , 1993, Environmental health perspectives.
[9] Agema Infrared Systems Ltd. Analysis of the combustion process , 1994 .
[10] Ulrik Sundbäck,et al. Annoyance of idling diesel engine noise evaluated by multivariate analysis , 1995 .
[11] Yoshinaka Takeda,et al. Emission Characteristics of Premixed Lean Diesel Combustion with Extremely Early Staged Fuel Injection , 1996 .
[12] T. Poinsot,et al. Improving Near-Wall Combustion and Wall Heat Transfer Modeling in SI Engine Computations , 1997 .
[13] Leslie M. Smith,et al. Renormalization group analysis of turbulence , 2003 .
[14] R. Reitz,et al. MODELING SPRAY ATOMIZATION WITH THE KELVIN-HELMHOLTZ/RAYLEIGH-TAYLOR HYBRID MODEL , 1999 .
[15] LJubisa Stankovic,et al. Time-frequency analysis of multiple resonances in combustion engine signals , 1999, Signal Process..
[16] R. B. Randall,et al. Influence of the resonant frequency on the control of knock in diesel engines , 1999 .
[17] O. Armas,et al. Diagnosis of DI Diesel combustion from in-cylinder pressure signal by estimation of mean thermodynamic properties of the gas , 1999 .
[18] Antonio J. Torregrosa,et al. Wavelet Transform applied to Combustion Noise Analysis in High-speed DI Diesel Engines , 2001 .
[19] Yang-Hann Kim,et al. A SIMPLE MODEL TO ESTIMATE THE IMPACT FORCE INDUCED BY PISTON SLAP , 2002 .
[20] Ryo Hasegawa,et al. HCCI Combustion in DI Diesel Engine , 2003 .
[21] Frank Ihlenburg,et al. The Medium-Frequency Range in Computational Acoustics: Practical and Numerical Aspects , 2003 .
[22] Alberto Broatch,et al. Combustion chamber resonances in direct injection automotive diesel engines: A numerical approach , 2004 .
[23] F. J. Salvador,et al. Using spray momentum flux measurements to understand the influence of diesel nozzle geometry on spray characteristics , 2005 .
[24] Alberto Broatch,et al. New methodology for in-cylinder pressure analysis in direct injection diesel engines—application to combustion noise , 2005 .
[25] Octavio Armas,et al. Influence of measurement errors and estimated parameters on combustion diagnosis , 2006 .
[26] Rolf D. Reitz,et al. A Study of the Effects of High EGR, High Equivalence Ratio, and Mixing Time on Emissions Levels in a Heavy-Duty Diesel Engine for PCCI Combustion , 2006 .
[27] B. Degraeuwe,et al. A concise wall temperature model for DI Diesel engines , 2006 .
[28] Antonio J. Torregrosa,et al. Combustion noise level assessment in direct injection Diesel engines by means of in-cylinder pressure components , 2007 .
[29] Alberto Broatch,et al. Computational study of the sensitivity to ignition characteristics of the resonance in DI diesel engine combustion chambers , 2007 .
[30] Raul Payri,et al. A new methodology for correcting the signal cumulative phenomenon on injection rate measurements , 2008 .
[31] Alberto Broatch,et al. Sound quality assessment of Diesel combustion noise using in-cylinder pressure components , 2009 .
[32] Rolf D. Reitz,et al. Operating a Heavy-Duty Direct-Injection Compression-Ignition Engine with Gasoline for Low Emissions , 2009 .
[33] Bengt Johansson,et al. Effects of Different Type of Gasoline Fuels on Heavy Duty Partially Premixed Combustion , 2009 .
[34] A.J. Torregrosa,et al. Suitability analysis of advanced diesel combustion concepts for emissions and noise control , 2011 .
[35] Ricardo Novella,et al. Two Strokes Diesel Engine - Promising Solution to Reduce CO2 Emissions , 2012 .
[36] Yoann Viollet,et al. Enabling High Efficiency Direct Injection Engine with Naphtha Fuel through Partially Premixed Charge Compression Ignition Combustion , 2012 .
[37] Antonio García,et al. Sensitivity of combustion noise and NOx and soot emissions to pilot injection in PCCI Diesel engines , 2013 .
[38] Arsham J. Shahlari,et al. Comparison of Compression Ignition Engine Noise Metrics in Low-Temperature Combustion Regimes , 2013 .
[39] Ricardo Novella,et al. Analysis of the combustion process, pollutant emissions and efficiency of an innovative 2-stroke HSDI engine designed for automotive applications , 2013 .
[40] Rolf D. Reitz,et al. Investigation of Pressure Oscillation Modes and Audible Noise in RCCI, HCCI, and CDC , 2013 .
[41] Fabrice Vidal,et al. Preliminary Design of a Two-Stroke Uniflow Diesel Engine for Passenger Car , 2013 .
[42] Rolf D. Reitz,et al. A Comprehensive Combustion Model for Biodiesel-Fueled Engine Simulations , 2013 .
[43] Ricardo Novella,et al. Implementation of the Partially Premixed Combustion concept in a 2-stroke HSDI diesel engine fueled with gasoline , 2014 .
[44] Ricardo Novella,et al. Investigation on Multiple Injection Strategies for Gasoline PPC Operation in a Newly Designed 2-Stroke HSDI Compression Ignition Engine , 2015 .
[45] Carlos Guardiola,et al. A direct transform for determining the trapped mass on an internal combustion engine based on the in-cylinder pressure resonance phenomenon , 2015 .
[46] Ricardo Novella,et al. Analysis of combustion concepts in a newly designed two-stroke high-speed direct injection compression ignition engine , 2015 .
[47] Hai Liu,et al. Sound quality prediction for engine-radiated noise , 2015 .
[48] Ricardo Novella,et al. Combustion noise analysis of partially premixed combustion concept using gasoline fuel in a 2-stroke engine , 2016 .
[49] Ricardo Novella,et al. Understanding the performance of the multiple injection gasoline partially premixed combustion concept implemented in a 2-Stroke high speed direct injection compression ignition engine , 2016 .
[50] Bo Yang,et al. Effects of pilot injection timing on the combustion noise and particle emissions of a diesel/natural gas dual-fuel engine at low load , 2016 .