Rotary friction welding of Inconel 718 – AISI 304 stainless steel dissimilar joint

[1]  N. K. Babu,et al.  A Review on Rotary and Linear Friction Welding of Inconel Alloys , 2021, Transactions of the Indian Institute of Metals.

[2]  A. Rehman,et al.  Microstructure and Mechanical Properties of Dissimilar Friction Welding Ti-6Al-4V Alloy to Nitinol , 2021 .

[3]  V. Balasubramanian,et al.  Investigation on mechanical and metallurgical properties of rotary friction welded In718/SS410 dissimilar materials , 2020 .

[4]  W. Che,et al.  Characterization of Interfacial Microstructure in Friction Welds Between Inconel 718 and SM45C Steel , 2020, Transactions of the Indian Institute of Metals.

[5]  M. Shamanian,et al.  Microstructure and Mechanical Properties of Inconel 617/AISI 310 Electron Beam Welds , 2019, Metallurgical and Materials Transactions A.

[6]  M. Takahashi,et al.  Joining phenomena and tensile strength of joint between Ni-based superalloy and heat-resistant steel by friction welding , 2019, The International Journal of Advanced Manufacturing Technology.

[7]  T. Pasang,et al.  Characterisation of Intermetallic Phases in Fusion Welded Commercially Pure Titanium and Stainless Steel 304 , 2018, Metals.

[8]  M. Majumder,et al.  Microstructural Characterization and Mechanical Properties of Friction-Welded IN718 and SS410 Dissimilar Joint , 2018, Metallography, Microstructure, and Analysis.

[9]  R. Derakhshandeh-Haghighi,et al.  Evaluating the Properties of Dissimilar Metal Welding Between Inconel 625 and 316L Stainless Steel by Applying Different Welding Methods and Consumables , 2018, Metallurgical and Materials Transactions A.

[10]  M. Jahazi,et al.  A Review on Inertia and Linear Friction Welding of Ni-Based Superalloys , 2015, Metallurgical and Materials Transactions A.

[11]  A. K. Bhaduri,et al.  Effect of Strain Rate on the Dynamic Recrystallization Behavior in a Nitrogen-Enhanced 316L(N) , 2014, Metallurgical and Materials Transactions A.

[12]  Xinjin Cao,et al.  Effect of pre- and post-weld heat treatment on metallurgical and tensile properties of Inconel 718 alloy butt joints welded using 4 kW Nd:YAG laser , 2009 .

[13]  M. Jahazi,et al.  Multi‐Scale Analysis of IN‐718 Microstructure Evolution During Linear Friction Welding , 2008 .

[14]  G. Madhusudhan Reddy,et al.  Friction welding of dissimilar pure metals , 2007 .

[15]  G. Reddy,et al.  Control of Laves phase in Inconel 718 GTA welds with current pulsing , 2004 .

[16]  H.T. Lee,et al.  Characteristics of dissimilar welding of alloy 690 to 304L stainless steel , 2001 .

[17]  Weixing Chen,et al.  Effect of boron segregation at grain boundaries on heat-affected zone cracking in wrought INCONEL 718 , 2001 .

[18]  Amber Shrivastava,et al.  Improvement in strength and ductility of rotary friction welded Inconel 600 and stainless steel 316L with Cu interlayer , 2023, CIRP Journal of Manufacturing Science and Technology.

[19]  G. Reddy,et al.  Friction welding of a nickel free high nitrogen steel: influence of forge force on microstructure, mechanical properties and pitting corrosion resistance , 2014 .

[20]  S. Raman,et al.  Effect of post-weld heat treatments on microstructure and mechanical properties of friction welded alloy 718 joints , 2014 .

[21]  G. Reddy,et al.  Role of nickel as an interlayer in dissimilar metal friction welding of maraging steel to low alloy steel , 2012 .