To investigate the spring-back behavior of dual-phase (DP) steel,V-shape spring-back experiments with different bending angles,relative bending radii and blank holding forces were carried out in this paper. It is concluded that with the increase of V-shape angle or blank holding force,the spring-back of DP steel sheets de- creases;while raising fillet radius of punch,which has the most apparent effects on spring-back,advances spring-back angle. Among DP590,DP780 and DP980,higher strength yields more notable spring-back due to larger elastic deformation. The difference of spring-back among these materials is relevant with the microstruc- ture and mechanical properties. The total elastic deformation approximately equals the ratio of the strength corre- sponding to the applied load to the modulus of elasticity.
[1]
Elmar Beeh,et al.
Super Light Car—lightweight construction thanks to a multi-material design and function integration
,
2009
.
[2]
R. H. Wagoner,et al.
Development and application of sheet-forming simulation
,
1995
.
[3]
F. Ozturk,et al.
Tensile and spring-back behavior of DP600 advanced high strength steel at warm temperatures
,
2009
.
[4]
Mary C. Boyce,et al.
Tooling design in sheet metal forming using springback calculations
,
1992
.
[5]
Ken-ichiro Mori,et al.
Springback behaviour in bending of ultra-high-strength steel sheets using CNC servo press
,
2007
.