Study on 3D spatial distribution of steel fibers in fiber reinforced cementitious composites through micro-CT technique

Abstract Fiber distribution in fiber reinforced cementitious composites (FRCC) is a critical factor affecting the reinforcement of fiber to composites. However, evaluation of fiber distribution in 3-dimension (3D) space has always been a great challenge due to the lack of transparency of FRCC and random distribution of fiber. To address this problem, micro-computed tomography (micro-CT) was used to characterize fiber distribution in this study, which permitted 3D visualization within the materials. By 3D image reconstruction, processing and analysis of CT images, the curves of fiber orientation distribution (FOD) and fiber spacing distribution (FSD) in cementitious composites can be obtained, and the orientation factor and dispersion coefficient of fiber can also be determined. The effect of aggregate size and content on fiber orientation distribution in cementitious composites is more obvious than that on fiber spacing distribution. Compared to conventional approach of 2D image analysis of cross-section of FRCC, the micro-CT image technique appears more intuitive and accurate, especially in the assessment of fiber dispersion.

[1]  M. Tsunekawa,et al.  Damage to cement concrete pavements due to exposure to organic compounds in a cold region , 2011 .

[2]  Surendra P. Shah,et al.  Spatial Distribution of Aligned Short Fibers in Cement Composites , 2000 .

[3]  B. Burgeth,et al.  Determination of the fibre orientation in composites using the structure tensor and local X-ray transform , 2010 .

[4]  M. Behloul,et al.  Characterisation of fibres distribution in a steel fibre reinforced concrete with electrical resistivity measurements , 2008 .

[5]  Yuanxia Yang.  Methods study on dispersion of fibers in CFRC , 2002 .

[6]  Nick R. Buenfeld,et al.  Pore Segmentation of Cement-based Materials from Backscattered Electron Images , 2006 .

[7]  S. Shah,et al.  Parameters related to fiber length and processing in cementitious composites , 2000 .

[8]  Nick R. Buenfeld,et al.  Binary segmentation of aggregate in SEM image analysis of concrete , 2001 .

[9]  Su-Tae Kang,et al.  The relation between fiber orientation and tensile behavior in an Ultra High Performance Fiber Reinforced Cementitious Composites (UHPFRCC) , 2011 .

[10]  Shunzhi Qian,et al.  Improved fiber distribution and mechanical properties of engineered cementitious composites by adjusting the mixing sequence , 2012 .

[11]  D.D.L. Chung,et al.  Improving the dispersion of steel fibers in cement mortar by the addition of silane , 2001 .

[12]  Jiaping Liu,et al.  Assessment of fiber distribution in steel fiber mortar using image analysis , 2012, Journal of Wuhan University of Technology-Mater. Sci. Ed..

[13]  Bruce E. Ankenman,et al.  EFFECT OF FIBER DISPERSION ON MULTIPLE CRACKING OF CEMENT COMPOSITES , 2001 .

[14]  K. Chung,et al.  Characterization of fiber orientation in short fiber reinforced composites with an image processing technique , 2002 .

[15]  Tadashi Saito,et al.  Study on Evaluation Method for PVA Fiber Distribution in Engineered Cementitious Composite , 2003 .

[16]  Steve Millard,et al.  Assessment of fibre orientation in ultra high performance fibre reinforced concrete and its effect on flexural strength , 2010 .

[17]  Sung-Sik Park,et al.  Effect of fiber reinforcement and distribution on unconfined compressive strength of fiber-reinforced cemented sand , 2009 .

[18]  Jin-keun Kim,et al.  Tensile and fiber dispersion performance of ECC (engineered cementitious composites) produced with ground granulated blast furnace slag , 2007 .

[19]  Surendra P. Shah,et al.  Correlation of fiber dispersion, rheology and mechanical performance of FRCs , 2007 .

[20]  J. Chermant,et al.  Some fields of applications of automatic image analysis in civil engineering , 2001 .

[21]  Xianghui Xiao,et al.  Damage evolution in SiC particle reinforced Al alloy matrix composites by X-ray synchrotron tomography , 2010 .

[22]  Steven Nutt,et al.  Direct observation and measurement of fiber architecture in short fiber-polymer composite foam through micro-CT imaging , 2004 .

[23]  Liberato Ferrara,et al.  Relationships between fibre distribution, workability and the mechanical properties of SFRC applied to precast roof elements , 2005 .

[24]  Jin-keun Kim,et al.  Quantitative evaluation technique of Polyvinyl Alcohol (PVA) fiber dispersion in engineered cementitious composites , 2009 .

[25]  Bhushan Lal Karihaloo,et al.  High performance fibre-reinforced cementitious composite (CARDIFRC) - Performance and application to retrofitting , 2007 .