Influence of particle size and mineral phase in the analysis of iron ore slurries by Laser-Induced Breakdown Spectroscopy

Laser-Induced Breakdown Spectroscopy (LIBS) was applied to the analysis of iron ore concentrates. The objective was to determine the influence of particle size and mineral phase on the LIBS signal. The LIBS spectra of hematite and magnetite ore concentrates were qualitatively indistinguishable from each other but magnetite yielded systematically less than hematite. This behavior could be set into an empirical equation to correct the iron peak intensities according to the level of magnetite in the analyzed sample. Similarly, an increase of the LIBS signal was observed as the particle size of the ore samples decreased. Again, an equation could be written down to correct the intensity of either iron or silicon in response to a variation of the average particle size of the ore concentrate. Using these corrections, proper response of the silicon signal against the concentration of silica in the samples was restored. The observed dependence of the strength of the iron signal upon the mineral phase is attributed to oxidation of magnetite into hematite.

[1]  J. Anzano,et al.  Laser-induced breakdown spectroscopy for quantitative spectrochemical analysis of geological materials: effects of the matrix and simultaneous determination. , 2006, Analytica chimica acta.

[2]  J. Winefordner,et al.  Identification of particulate materials by correlation analysis using a microscopic laser induced breakdown spectrometer , 2000 .

[3]  David W. Hahn,et al.  On-Line Sorting of Wood Treated with Chromated Copper Arsenate Using Laser-Induced Breakdown Spectroscopy , 2002 .

[4]  Jouko Korppi-Tommola,et al.  Sulfide mineral identification using laser-induced plasma spectroscopy , 2003 .

[5]  D. Michaud,et al.  Shooting slurries with laser-induced breakdown spectroscopy: sampling is the name of the game. , 2003, Applied optics.

[6]  Louis Barrette,et al.  On-line iron-ore slurry monitoring for real-time process control of pellet making processes using laser-induced breakdown spectroscopy: graphitic vs. total carbon detection ☆ , 2001 .

[7]  Israel Schechter,et al.  Study of matrix effects in laser plasma spectroscopy by shock wave propagation , 2001 .

[8]  Laser-induced breakdown spectroscopy for on-line control of selective removal of cobalt binder from tungsten carbide hardmetal by pulsed UV laser surface ablation , 2001 .

[9]  Reinhard Noll,et al.  Laser-induced breakdown spectroscopy: a versatile tool for process control , 1994, Other Conferences.

[10]  S. Nasrazadani,et al.  Study of phase transformation in iron oxides using Laser Induced Breakdown Spectroscopy , 2006 .

[11]  N. Arnold,et al.  In situ Analysis of Metal Melts in Metallurgic Vacuum Devices by Laser-Induced Breakdown Spectroscopy , 2004, Applied spectroscopy.

[12]  Reinhard Noll,et al.  Quality assurance in the production of pipe fittings by automatic laser-based material identification , 1999, Industrial Lasers and Inspection.

[13]  Metallschrotte nach Analyse automatisch sortieren , 1993 .

[14]  J. D. Winefordner,et al.  Laser‐induced plasma spectroscopy for plastic identification , 2000 .

[15]  U. Hahn,et al.  Applications of laser-induced emission spectral analysis for industrial process and quality control , 1992 .

[16]  C. Fotakis,et al.  Laser-Induced Breakdown Spectroscopy for Polymer Identification , 1998 .

[17]  D. Cremers,et al.  Matrix Effects in the Detection of Pb and Ba in Soils Using Laser-Induced Breakdown Spectroscopy , 1996 .

[18]  Study of laser induced breakdown spectroscopy as a process monitor and control tool for hazardous waste remediation , 1997 .

[19]  R. Niessner,et al.  Process analysis of recycled thermoplasts from consumer electronics by laser-induced plasma spectroscopy. , 2002, Analytical chemistry.