Acoustic emission monitoring of fatigue crack propagation

Abstract The monitoring of fatigue crack propagation in steel and welded steel compact tension and T-section girder test specimens, using an advanced acoustic emission system with accurate source location, is described. The compact tension test specimens were subjected to load ratios of 0.1, 0.3, 0.5 and 0.7 while the T-section girders were subjected to a load ratio of 0.3. Located acoustic emission events were filtered for a narrow band containing the fatigue crack, and separated for different regions of the applied load range. The test results indicate that acoustic emission count rates, for small percentages of the applied load range close to the peak load, show reasonable correlation with crack propagation rates. Based on these correlations it may be possible to predict the remaining service life of fatigue damaged structures from the results of short term acoustic emission monitoring.

[1]  T. M. Roberts,et al.  Structural Integrity of Welded Steel Structures , 1999 .

[2]  Daining Fang,et al.  Study of fatigue crack characteristics by acoustic emission , 1995 .

[3]  C. E. Richards,et al.  Acoustic emission monitoring of fatigue crack growth , 1978 .

[4]  Wei Ke,et al.  Characteristics of acoustic emission for A537 structural steel during fatigue crack propagation , 1992 .

[5]  Z. Gong,et al.  ACOUSTIC EMISSION MONITORING OF STEEL RAILROAD BRIDGES , 1992 .

[6]  W. W. Gerberich,et al.  Some observations on stress wave emission as a measure of crack growth , 1967 .

[7]  S. J. Maddox,et al.  Fatigue strength of welded structures , 1991 .

[8]  M. N. Bassim,et al.  Detection of the onset of fatigue crack growth in rail steels using acoustic emission , 1994 .

[9]  M. N. Bassim.  Detection of fatigue crack propagation with acoustic emission , 1992 .

[10]  T Jayakumar,et al.  Acoustic emission behaviour during stage II fatigue crack growth in an AISI type 316 austenitic stainless steel , 1994 .

[11]  R. Harrington,et al.  Acoustic emissions of fatigue crack growth , 1973 .

[12]  J. Barnby.  The mechanics of fracture and fatigue , 1982 .

[13]  A. Berkovits,et al.  Fatigue Design Model Based on Damage Mechanisms Revealed by Acoustic Emission Measurements , 1995 .

[14]  Stuart McBride,et al.  Enhanced Fatigue Crack Detection in Aging Aircraft Using Continuous Acoustic Emission Monitoring , 1994 .

[15]  T. M. Roberts,et al.  Correlation of Crack Propagation and Acoustic Emission Rates , 2001 .

[16]  D. Duquesnay,et al.  Measurement and interpretation of fatigue crack growth in 7075 aluminum alloy using acoustic emission monitoring , 1998 .