论文信息 - Improvement in digital control electronic for CCC Resistance Bridge with sinusoidal biasing currents

Improvement in digital control electronic for CCC Resistance Bridge with sinusoidal biasing currents

Control electronics and software for Cryogenic Current Comparator (CCC) Resistance Bridge operated with sinusoidal biasing currents at ultra low frequencies is upgraded in MIKES and the details of its operation are presented. Results of comparative measurement with the previously used control units showed that developed electronics and software allows simplification of measurement process and make automation of resistance calibration more convenient.

J. Hamalainen | A. Satrapinski

[1] Dietmar Drung,et al. Settling Behavior of the Bridge Voltage in Resistance Ratio Measurements With Cryogenic Current Comparators , 2011, IEEE Transactions on Instrumentation and Measurement.

[2] F. Delahaye,et al. An AC-bridge for low-frequency measurements of the quantized Hall resistance , 1991 .

[3] David R. Smith,et al. Design and metrological applications of a low noise, high electrical isolation measurement unit , 2009 .

[4] T. Varpula,et al. Frequency dependence of 100-/spl Omega/ standard resistors measured with a CCC-based AC resistance bridge , 1995 .

[5] Barry M. Wood,et al. CCC Bridge With Digitally Controlled Current Sources , 2008, IEEE Transactions on Instrumentation and Measurement.

[6] Jonathan M. Williams,et al. An automated cryogenic current comparator resistance ratio bridge , 1990 .