Minimization of Heat Sink Mass Using CFD and Mathematical Optimization

This paper describes the use of CFD and mathematical optimization to minimise heat sink mass given a maximum allowable heat sink temperature, a constant cooling fan power and heat source. Heat sink designers have to consider a number of conflicting parameters. Heat transfer is influenced by, amongst others, heat sink properties (such as surface area), airflow bypass and the location of heat sources, whilst size and/or mass of the heat sink needs to be minimized. This multiparameter problem lends itself naturally to optimization techniques. In this study a commercial CFD code, STAR-CD, is linked to the DYNAMIC-Q method of Snyman. Five design variables are considered for three heat source cases. Optimal designs are obtained within six design iterations. The paper illustrates how mathematical optimization can be used to design compact heat sinks for different types of electronic enclosures.

[1]  Roy W. Knight,et al.  Optimal Thermal Design of Forced Convection Heat Sinks-Analytical , 1991 .

[2]  N. Stander,et al.  On the robustness and efficiency of the SAM algorithm for structural optimization , 1995 .

[3]  N. Stander,et al.  New Successive Approximation Method for Optimum Structural Design , 1994 .

[4]  Nestor V. Queipo,et al.  Multiobjective optimal placement of convectively cooled electronic components on printed wiring boards , 1998 .

[5]  Seri Lee.  Optimum design and selection of heat sinks , 1995 .

[6]  Jan A. Snyman.  An improved version of the original leap-frog dynamic method for unconstrained minimization: LFOP1(b) , 1983 .

[7]  J. Snyman,et al.  Penalty function solutions to optimal control problems with general constraints via a dynamic optimisation method , 1992 .

[8]  A. Patera,et al.  ICASE Report No . 93-50 191510 IC S 2 O Years ofExcellence SURROGATES FOR NUMERICAL SIMULATIONS ; OPTIMIZATION OF EDDY-PROMOTER HEAT EXCHANGERS , 1993 .

[9]  Nestor V. Queipo,et al.  Genetic algorithms for thermosciences research: application to the optimized cooling of electronic components , 1994 .

[10]  N. Stander,et al.  A dynamic penalty function method for the solution of structural optimization problems , 1994 .

[11]  Roy W. Knight,et al.  Optimal thermal design of air cooled forced convection finned heat sinks-experimental verification , 1992 .

[12]  Jan A. Snyman,et al.  The LFOPC leap-frog algorithm for constrained optimization , 2000 .

[13]  Jan A. Snyman,et al.  Using CFD and mathematical optimization to investigate air pollution due to stacks , 1999 .

[14]  J. Snyman.  A new and dynamic method for unconstrained minimization , 1982 .

[15]  D. J. de Kock,et al.  Optimisation of structured grid spacing parameters for separated flow simulation using mathematical optimisation , 1999 .

[16]  Jan A. Snyman,et al.  A mathematical optimization methodology for the optimal design of a planar robotic manipulator , 1999 .