The capacity credit of micro-combined heat and power

This article is concerned with development of a methodology to determine the capacity credit of micro-combined heat and power (micro-CHP), and application of the method for the UK. Capacity credit is an important parameter in electricity system planning because it measures the amount of conventional generation that would be displaced by an alternative technology. Firstly, a mathematical formulation is presented. Capacity credit is then calculated for three types of micro-CHP units--Stirling engine, internal combustion engine, and fuel cell systems--operating under various control strategies. It is found that low heat-to-power ratio fuel cell technologies achieve the highest capacity credit of approximately 85% for a 1.1Â GW penetration when a heat-led control strategy is applied. Higher heat-to-power ratio Stirling engine technology achieves approximately 33% capacity credit for heat-led operation. Low heat-to-power ratio technologies achieve higher capacity credit because they are able to continue operating even when heat demand is relatively low. Capacity credit diminishes as penetration of the technology increases. Overall, the high capacity credit of micro-CHP contributes to the viewpoint that the technology can help meet a number of economic and environmental energy policy aims.

[1]  Goran Strbac,et al.  Total cost estimates for large-scale wind scenarios in UK , 2004 .

[2]  M. Newborough,et al.  Impact of micro-combined heat-and-power systems on energy flows in the UK electricity supply industry , 2006 .

[3]  D. Berry,et al.  Statistics: Theory and Methods , 1990 .

[4]  David Milborrow,et al.  Economics of wind power and comparisons with conventional thermal plant , 1994 .

[5]  Evgueniy Entchev,et al.  Residential fuel cell energy systems performance optimization using “soft computing” techniques , 2003 .

[6]  Adam Hawkes,et al.  Cost-effective operating strategy for residential micro-combined heat and power , 2007 .

[7]  Adam Hawkes,et al.  Solid oxide fuel cell micro combined heat and power system operating strategy: Options for provision of residential space and water heating , 2007 .

[8]  M.A. Matos,et al.  Operational reserve of a power system with a large amount of wind power , 2004, 2004 International Conference on Probabilistic Methods Applied to Power Systems.

[9]  M. Newborough,et al.  Controlling micro-CHP systems to modulate electrical load profiles , 2007 .

[10]  Adam Hawkes,et al.  Solid oxide fuel cell systems for residential micro-combined heat and power in the UK: Key economic drivers , 2005 .

[11]  William D'haeseleer,et al.  An analytical formula for the capacity credit of wind power , 2006 .

[12]  D. J. Milborrow,et al.  The performance of arrays of wind turbines , 1980 .

[13]  Michael Beenstock.  The stochastic economics of windpower , 1995 .

[14]  M. Elsayed,et al.  Substitution potential of wind energy in Egypt , 2002 .