Modeling bond-slip deformations in reinforced concrete beam-column joints

A new finite element model for reinforced concrete beam-column joints is proposed. The model considers the effects of bond-slip and shear deformations in the joint panel region. The problems associated with modeling bond-slip of anchored reinforcing bars are discussed. The proposed bond-slip model is examined at the element level by comparing its predictions with other analytical and experimental results. The ability of the model to simulate bond deterioration and eventual pullout of anchored reinforcing bars under severe cyclic excitation is demonstrated. This model is incorporated into the global beam-column joint element. Further comparisons are made between the predictions of the proposed beam-column joint model and other analytical and experimental results under reversed cyclic loading to show the validity of the model to describe the bond-slip behavior of the joints.Key words: bond, bond-slip, finite element, beam-column, reinforced concrete, cyclic.

[1]  W. K. Tso,et al.  NONLINEAR ANALYSIS OF CYCLICALLY LOADED REINFORCED CONCRETE STRUCTURES , 1998 .

[2]  Vitelmo V. Bertero,et al.  Analytical model for concrete anchorages of reinforcing bars under generalized excitations , 1982 .

[3]  D. Ngo,et al.  Finite Element Analysis of Reinforced Concrete Beams , 1967 .

[4]  Vitelmo V. Bertero,et al.  Local bond stress-slip relationships of deformed bars under generalized excitations , 1982 .

[5]  Guney Ozcebe,et al.  HYSTERETIC BEHAVIOR OF ANCHORAGE SLIP IN R/C MEMBERS , 1992 .

[6]  Muhammad A. Mukaddam,et al.  Reinforced Concrete Joints under Cyclic Loading , 1986 .

[7]  Filip C. Filippou.  A Simple Model for Reinforcing Bar Anchorages Under Cyclic Excitations , 1985 .

[8]  J. F. Bonacci,et al.  On earthquake-resistant reinforced concrete frame connections , 1994 .

[9]  Manfred Keuser,et al.  Finite Element Models for Bond Problems , 1987 .

[10]  Saad Eldine Mostafa Elmorsi.  ANALYTICAL MODELING OF REINFORCED CONCRETE BEAM COLUMN CONNECTIONS FOR SEISMIC LOADING , 1998 .

[11]  Vitelmo V. Bertero,et al.  Modeling of R/C Joints under Cyclic Excitations , 1983 .

[12]  Giorgio Monti,et al.  FINITE ELEMENT FOR ANCHORED BARS UNDER CYCLIC LOAD REVERSALS , 1997 .

[13]  Arthur H. Nilson,et al.  INTERNAL MEASUREMENT OF BOND SLIP , 1972 .

[14]  Gaetano Zingone,et al.  Analytical Solution for Bond‐Slip of Reinforcing Bars in R.C. Joints , 1990 .

[15]  Parviz Soroushian,et al.  Analytical Modeling of Bonded Bars under Cyclic Loads , 1991 .