Numerical simulation of tangential flow flameless combustion process

Rapid industrialization and changes in life style cause a teremendous increase in energy consumption. Fossil fuels are the most common energy source in the world. Increasing of fuel consumption cuased more pollutant formation and resources depletion. In this project flameless combustion has been investigated as a reliable solution to this problem. Many studies has been carried out on different setup of flameless burners. In this thesis a new setup has been studied that is tangential fuel-oxidizer arrangement of inlets. This study shows that changing in the arrangement of inlets from co-axial to tangential will increase the efficiency of the lab scale combustor upto 14% and caused reduction of emissions and in particular NOx formation upto 55%. Also it has been concluded that the maximum temperature of flameless combustion in this new setting is higher by about 12%. Additionally this maximum temperature occurs near the wall of the combustor despite of co-axial flow which its highest temperature occurs at the center line. This phenomena helps improving of combustion efficiency. Because the most application of this kind of burners are in the boilers and the pipes which carry water to be heated are installed near the wall of boilers this issue can be considered as a big advantages of tangential flow flameless combustion process rather than co-axial one

[1]  Malcolm A. Weiss,et al.  Combustion Rates in Spherical Reactors. Effects of Inlet Temperature and Fuel Type , 1958 .

[2]  T. Takeno,et al.  An experimental study on stability and combustion characteristics of an excess enthalpy flame , 1982 .

[3]  Teodora Rutar,et al.  NOx Formation in High-Pressure Jet-Stirred Reactors With Significance to Lean-Premixed Combustion Turbines , 2001 .

[4]  W. Reynolds,et al.  Fundamentals of Turbulence for Turbulence Modeling and Simulation , 1987 .

[5]  J. Howell,et al.  Experimental and Numerical Study of Premixed Combustion Within Nonhomogeneous Porous Ceramics , 1993 .

[6]  Graham T. Reader,et al.  Biodiesel engine performance and emissions in low temperature combustion , 2008 .

[7]  B. Hjertager,et al.  On mathematical modeling of turbulent combustion with special emphasis on soot formation and combustion , 1977 .

[8]  Tiziano Faravelli,et al.  Analysis of process parameters for steady operations in methane mild combustion technology , 2004 .

[9]  Hukam Chand Mongia,et al.  Three-dimensional combustor performance validation with high-densityfuels , 1990 .

[10]  Bhupinder Singh,et al.  Modeling of Flame Blowout and Emissions in Vitiated Combustion of Biofuels , 2009 .

[11]  N. Peters Laminar flamelet concepts in turbulent combustion , 1988 .

[12]  Kefa Cen,et al.  Boilers and burners : design and theory , 1999 .

[13]  B. Magnussen On the structure of turbulence and a generalized eddy dissipation concept for chemical reaction in turbulent flow , 1981 .

[14]  Dimosthenis Trimis,et al.  Combustion in a Porous Medium-Advances and Applications , 1996 .

[15]  T. Shih,et al.  A new k-ϵ eddy viscosity model for high reynolds number turbulent flows , 1995 .

[16]  S. Turns Understanding NOx formation in nonpremixed flames: Experiments and modeling , 1995 .

[17]  A. Gupta,et al.  Thermal Characteristics of Gaseous Fuel Flames Using High Temperature Air , 2004 .

[18]  M. Pourkashanian,et al.  NOx formation in geometrically scaledgas-fired industrial burners , 1994 .

[19]  John R. Howell,et al.  Combustion of hydrocarbon fuels within porous inert media , 1996 .

[20]  David T. Pratt,et al.  Chemical reactor modeling applied to the production of pollutant emission in LP combustors , 1997 .

[21]  V. Sherbaum,et al.  Basic thermodynamics of FLOXCOM, the low-NOx gas turbines adiabatic combustor , 2004 .

[22]  Wlodzimierz Blasiak,et al.  Flameless oxyfuel combustion for fuel consumption and nitrogen oxides emissions reductions and productivity increase , 2007 .

[23]  William E. Lear,et al.  Prediction of Dilute, Kinetically-Controlled Gas Turbine Combustion Efficiency , 2003 .

[24]  J. Yuan,et al.  Modeling of combustion characteristics and NOx emission in highly preheated and diluted air combustion , 1998 .

[25]  N. K. Rizk,et al.  Semianalytical Correlations for NOx, CO, and UHC Emissions , 1993 .

[26]  F. B. Carleton,et al.  Partial oxidation of fuel-rich mixtures in a spouted bed combustor , 1988 .

[27]  Tadao Takeno,et al.  An Excess Enthalpy Flame Theory , 1979 .

[28]  R. Rota,et al.  Sustainability of mild combustion of hydrogen-containing hybrid fuels , 2007 .

[29]  J. Zelina,et al.  Combustor stability and emissions research using a well-stirred reactor , 1997 .

[30]  D. Spalding Mixing and chemical reaction in steady confined turbulent flames , 1971 .

[31]  Robert W. Schefer,et al.  Hydrogen enrichment for improved lean flame stability , 2003 .

[32]  G. J. Sturgess,et al.  Lean Blowout in a Research Combustor at Simulated Low Pressures , 1991 .

[33]  K. Kuo Principles of combustion , 1986 .

[34]  N. K. Rizk,et al.  A Semi-Analytical Emission Model for Diffusion Flame, Rich/Lean and Premixed Lean Combustors , 1995 .

[35]  R. Srinivasan,et al.  Chemical Reactor Network Application to Emissions Prediction for Industial DLE Gas Turbine , 2006 .

[36]  Felix Jiri Weinberg,et al.  Burners Producing Large Excess Enthalpies , 1973 .

[37]  G. Karim,et al.  Energy-Concentration Phenomenon in Combustion Waves , 2002 .

[38]  Jay P. Gore,et al.  Prediction of effective thermal conductivity of cellular ceramics , 1998 .

[39]  V. S. Babkin,et al.  Theory of filtrational combustion of gases , 1984 .

[40]  C. Westbrook,et al.  Chemical kinetic modeling of hydrocarbon combustion , 1984 .

[41]  L. Kennedy,et al.  Superadiabatic combustion of methane air mixtures under filtration in a packed bed , 1995 .

[42]  G. J. Sturgess,et al.  Fuel Effects on Lean Blowout and Emissions from a Well-Stirred Reactor , 1999 .

[43]  Stephen B. Pope,et al.  Computationally efficient implementation of combustion chemistry using in situ adaptive tabulation , 1997 .

[44]  I. T. Osgerby,et al.  Literature Review of Turbine Combustor Modeling and Emissions , 1974 .

[45]  Wright-Patterson Afb,et al.  Soot Reduction Research Using a Well-Stirred Reactor , 2005 .

[46]  Katherine C. Cushman,et al.  Chemical Kinetic Simulation of the Combustion of Bio-based Fuels , 2007 .

[47]  F. Weinberg,et al.  Combustion Temperatures: The Future? , 1971, Nature.

[48]  Claudio Bruno,et al.  THEORETICAL AND NUMERICAL INVESTIGATION ON FLAMELESS COMBUSTION , 2002 .

[49]  Hukam Chand Mongia,et al.  NOx model for lean combustion concept , 1995 .

[50]  P. Sabia,et al.  Mild Combustion in Homogeneous Charge Diffusion Ignition (HCDI) regime , 2007 .

[51]  Laszlo Fuchs,et al.  Experimental and Numerical Study of Flameless Combustion in a Model Gas Turbine Combustor , 2007 .

[52]  Masashi Katsuki,et al.  The science and technology of combustion in highly preheated air , 1998 .

[53]  J. Wunning,et al.  Flameless oxidation to reduce thermal no-formation , 1997 .

[54]  H. A. Mohamed,et al.  SIMULATION OF POLLUTANT EMISSIONS FROM A GAS-TURBINE COMBUSTOR , 2004 .

[55]  W. Jones,et al.  Calculation methods for reacting turbulent flows: A review , 1982 .

[56]  Felix Jiri Weinberg,et al.  Combustion in heat exchangers , 1978, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[57]  William E. Lear,et al.  Soot Formation in Vitiated Combustion , 2009 .

[58]  Laminar premixed flame stabilized inside a honeycomb ceramic , 1991 .

[59]  Alessandro Saponaro,et al.  Zero-dimensional analysis of diluted oxidation of methane in rich conditions , 2000 .

[60]  Shigehiko Kaneko,et al.  Emissions in combustion of lean methane-air and biomass-air mixtures supported by primary hot burned gas in a multi-stage gas turbine combustor , 2007 .

[61]  Mohamed Pourkashanian,et al.  Validation of a Flamelet Approach to Modelling 3-D Turbulent Combustion Within an Airspray Combustor , 2002 .

[62]  N. Peters Laminar diffusion flamelet models in non-premixed turbulent combustion , 1984 .

[63]  D. Spalding Some Fundamentals of Combustion , 1955 .

[64]  Avinash Kumar Agarwal,et al.  Experimental investigation of control of NOx emissions in biodiesel-fueled compression ignition engine , 2006 .

[65]  F. Weinberg,et al.  A burner for mixtures of very low heat content , 1974, Nature.

[66]  Gang Xu,et al.  The Effects of Fuel Dilution With Steam on Gas Turbine Combustor Performance , 2007 .

[67]  Bjørn F. Magnussen,et al.  A Numerical Study of a Bluff-Body Stabilized Diffusion Flame. Part 2. Influence of Combustion Modeling And Finite-Rate Chemistry , 1996 .

[68]  J. P. Longwell,et al.  HIGH-TEMPERATURE REACTION RATES IN HYDRO-CARBON COMBUSTION , 1955 .