Irradiated Nuclear Fuel Management: Resource Versus Waste

Management of irradiated fuel is an important component of commercial nuclear power production. Although it is broadly agreed that the disposition of some fraction of the fuel in geological repositories will be necessary, there is a range of options that can be considered that affect exactly what fraction of material will be disposed in that manner. Furthermore, until geological repositories are available to accept commercial irradiated fuel, these materials must be safely stored. Temporary storage of irradiated fuel has traditionally been conducted in storage pools, and this is still true for freshly discharged fuel. Criticality control technologies have led to greater efficiencies in packing of irradiated fuel into storage pools. With continued delays in establishing permanent repositories, utilities have begun to move some of the irradiated fuel inventory into dry storage. Fuel cycle options being considered worldwide include the once-through fuel cycle, limited recycle in which U and Pu are recycled back to power reactors as mixed oxide fuel, and advance partitioning and transmutation schemes designed to reduce the long term hazards associated with geological disposal from millions of years to a few hundred years. Each of these options introduces specific challenges in terms of the waste forms required tomore » safely immobilize the hazardous components of irradiated fuel.« less

[1]  Arun S. Wagh,et al.  Magnesium potassium phosphate ceramic for 99Tc immobilization , 2006 .

[2]  M. V. Nikonov,et al.  Leach rates of uranium and thorium from murataite ceramics , 2009 .

[3]  Kuniyoshi Hoshino,et al.  Immobilization of Radioactive Iodine Using AgI Vitrification Technique for the TRU Wastes Disposal: Evaluation of Leaching and Surface Properties , 2008 .

[4]  M. I. Ojovan,et al.  Glassy Wasteforms for Nuclear Waste Immobilization , 2011 .

[5]  Hiroyasu Kato,et al.  Iodine Immobilization by Sodalite Waste Form , 2000 .

[6]  James L. Krumhansl,et al.  Hydrotalcite-like layered bismuth–iodine–oxides as waste forms , 2010 .

[7]  A. E. Ringwood,et al.  Immobilisation of high level nuclear reactor wastes in SYNROC , 1979, Nature.

[8]  Atsuko Kosuga,et al.  Thermal and mechanical properties of AgPb9(VO4)6I and AgBa9(VO4)6I , 2004 .

[9]  R. Taylor,et al.  The immobilization of high level radioactive wastes using ceramics and glasses , 1997 .

[10]  Mark A. Rodriguez,et al.  Capture of volatile iodine, a gaseous fission product, by zeolitic imidazolate framework-8. , 2011, Journal of the American Chemical Society.

[11]  John D. Vienna,et al.  Nuclear Waste Glasses , 2005 .

[12]  Thomas Hartmann,et al.  Structure studies on lanthanide technetium pyrochlores as prospective host phases to immobilize 99technetium and fission lanthanides from effluents of reprocessed used nuclear fuels , 2011 .

[13]  James L. Krumhansl,et al.  Low‐Temperature Sintering Bi–Si–Zn‐Oxide Glasses for Use in Either Glass Composite Materials or Core/Shell 129I Waste Forms , 2011 .

[14]  Shoichi Tachimori,et al.  THE NOVEL EXTRACTANTS, DIGLYCOLAMIDES, FOR THE EXTRACTION OF LANTHANIDES AND ACTINIDES IN HNO3–n-DODECANE SYSTEM , 2001 .

[15]  T. H. Siddal Bidentate organophosphorus compounds as extractants—I: Extraction of cerium, promethium, and americium nitrates☆ , 1963 .

[16]  Ralph G. Pearson,et al.  HARD AND SOFT ACIDS AND BASES , 1963 .

[17]  M. D. Exter,et al.  Immobilization and Behavior of Technetium in a Magnesium Titanate Matrix for Final Disposal , 2006 .

[18]  Masayoshi Uno,et al.  Some properties of a lead vanado-iodoapatite Pb10(VO4)6I2 , 2001 .

[19]  T. H. Siddall Bidentate organophosphorus compounds as extractants—II: Extraction mechanisms for cerium(III) nitrate , 1964 .

[20]  Brian J. Riley,et al.  Multi‐Phase Glass‐Ceramics as a Waste Form for Combined Fission Products: Alkalis, Alkaline Earths, Lanthanides, and Transition Metals , 2012 .

[21]  W. W. Schulz,et al.  The Truex Process and the Management of Liquid Tru Uwaste , 1988 .

[22]  Bruce D. Begg,et al.  Immobilisation of 129I by encapsulation in tin by hot-pressing at 200 °C , 2005 .

[23]  John D. Vienna,et al.  A Trade Study for Waste Concepts to Minimize HLW Volume , 2008 .

[24]  Hyun-Shik Chang,et al.  Immobilization of 99-technetium (VII) by Fe(II)-goethite and limited reoxidation. , 2011, Environmental science & technology.

[25]  R. A. Day,et al.  A Melting Route to Synroc for Hanford HLW Immobilization , 1995 .

[26]  Masaaki Kaneko,et al.  Contribution to Understanding Iodine Sorption Mechanism onto Mixed Solid Alumina Cement and Calcium Compounds , 2002 .

[27]  Rodney C. Ewing,et al.  The fate of the epsilon phase (Mo-Ru-Pd-Tc-Rh) in the UO2 of the Oklo natural fission reactors , 2006 .

[28]  Thierry Advocat,et al.  Alteration of Cold Crucible Melter Titanate-Based Ceramics: Comparison with Hot-Pressed Titanate-Based Ceramic , 1996 .

[29]  Neil C. Hyatt,et al.  Silver Zeolites: Iodide Occlusion and conversion to Sodalite – a potential 129 I waste form? , 2006 .