A Bottom-up Energy Efficiency Improvement Roadmap for China’s Iron and Steel Industry up to 2050:

Author(s): Zhang, Qi; Hasanbeigi, Ali; Price, Lynn; Lu, Hongyou; Arens, Marlene | Abstract: Iron and steel manufacturing is energy intensive in China and in the world. China is the world largest steel producer accounting for around half of the world steel production. In this study, we use a bottom-up energy consumption model to analyze four steel-production and energy-efficiency scenarios and evaluate the potential for energy savings from energy-efficient technologies in China’s iron and steel industry between 2010 and 2050. The results show that China’s steel production will rise and peak in the year 2020 at 860 million tons (Mt) per year for the base-case scenario and 680 Mt for the advanced energy-efficiency scenario. From 2020 on, production will gradually decrease to about 510 Mt and 400 Mt in 2050, for the base-case and advanced scenarios, respectively. Energy intensity will decrease from 21.2 gigajoules per ton (G/t) in 2010 to 12.2 GJ/t and 9.9 GJ/t in 2050 for the base-case and advanced scenarios, respectively. In the near term, decreases in iron and steel industry energy intensity will come from adoption of energy-efficient technologies. In the long term, a shift in the production structure of China’s iron and steel industry, reducing the share of blast furnace/basic oxygen furnace production and increasing the share of electric-arc furnace production while reducing the use of pig iron as a feedstock to electric-arc furnaces will continue to reduce the sector’s energy consumption. We discuss barriers to achieving these energy-efficiency gains and make policy recommendations to support improved energy efficiency and a shift in the nature of iron and steel production in China.

[1]  Ernst Worrell,et al.  Energy Intensity Development of the German Iron and Steel Industry between 1991 and 2007 , 2012 .

[2]  Zongguo Wen,et al.  Estimates of the potential for energy conservation and CO2 emissions mitigation based on Asian-Pacific Integrated Model (AIM): the case of the iron and steel industry in China , 2014 .

[3]  Ali Hasanbeigi,et al.  Retrospective and prospective decomposition analysis of Chinese manufacturing energy use and policy implications , 2013 .

[4]  Xiang Yin,et al.  A bottom-up analysis of China’s iron and steel industrial energy consumption and CO2 emissions , 2014 .

[5]  Wang Wei-xing.  Energy Structure and Energy-Saving in Iron and Steel Industry , 2006 .

[6]  Harry Gou,et al.  A corporate mass and energy simulation model for an integrated steel plant , 2007 .

[7]  Wenying Chen,et al.  Trends and development of steel demand in China: A bottom–up analysis , 2013 .

[8]  Trends and Developments in the Intensity of Steel Use , 2008 .

[9]  Nan Zhou,et al.  Analysis of potential energy saving and CO2 emission reduction of home appliances and commercial equipments in China , 2011 .

[10]  Christoph Menke,et al.  Barriers to energy efficiency improvement and decision-making behavior in Thai industry , 2010 .

[11]  Christoph Böhringer,et al.  Integrated assessment of energy policies: Decomposing top-down and bottom-up , 2009 .

[12]  Can Wang,et al.  Scenario analysis on CO2 emissions reduction potential in China's iron and steel industry , 2007 .

[13]  Zeyi Jiang,et al.  Quantification of Chinese steel cycle flow: Historical status and future options , 2014 .

[14]  Anjian Wang,et al.  Based on material flow analysis: Value chain analysis of China iron resources , 2014 .

[15]  Wang An-jian,et al.  The Prediction of China's Steel Demand Based on S-shaped Regularity , 2010 .

[16]  Jinping Tian,et al.  Measures and potentials of energy-saving in a Chinese fine chemical industrial park , 2012 .

[17]  Lei Zhu,et al.  Cost of energy saving and CO2 emissions reduction in China’s iron and steel sector , 2014 .

[18]  Lynn Price,et al.  A Comparison of Iron and Steel Production Energy Use and Energy Intensity in China and the U.S. , 2014 .

[19]  Claudia Sheinbaum,et al.  Using logarithmic mean Divisia index to analyze changes in energy use and carbon dioxide emissions in Mexico's iron and steel industry , 2010 .

[20]  Bo Chen,et al.  Investigation of the residual heat recovery and carbon emission mitigation potential in a Chinese steelmaking plant: A hybrid material/energy flow analysis case study , 2013 .

[21]  Wenying Chen,et al.  Quantify the energy and environmental benefits of implementing energy-efficiency measures in China’s iron and steel production , 2015 .

[22]  Tengfang Xu,et al.  A bottom-up model to estimate the energy efficiency improvement and CO2 emission reduction potentials in the Chinese iron and steel industry , 2013 .