Fabrication of AA2024−TiO2 nanocomposites through stir casting process

[1]  B. Niroumand,et al.  The role of accumulative roll bonding after stir casting process to fabricate high-strength and nanostructured AA2024-(SiO2+TiO2) hybrid nanocomposite , 2020 .

[2]  C. Ramana,et al.  Ultrasonic cavitation: An approach to synthesize uniformly dispersed metal matrix nanocomposites—A review , 2020 .

[3]  C. Rao,et al.  Fabrication and characterization two step stir casting with ultrasonic assisted novel AA7150-hBN nanocomposites , 2020 .

[4]  C. Rao,et al.  Production of high performance AA7150-1% SiC nanocomposite by novel fabrication process of ultrasonication assisted stir casting. , 2019, Ultrasonics sonochemistry.

[5]  B. Niroumand,et al.  Synthesis of AA2024-(SiO2np+TiO2np) hybrid nanocomposite via stir casting process , 2019, Materials Science and Engineering: A.

[6]  K. Chawla,et al.  Metal Matrix Composites , 2013 .

[7]  B. Niroumand,et al.  Pressure infiltration processes to synthesize metal matrix composites – A review of metal matrix composites, the technology and process simulation , 2018 .

[8]  B. Eghbali,et al.  Microstructural characterization and mechanical properties of TiB 2 reinforced Al6061 matrix composites produced using stir casting process , 2018 .

[9]  B. Niroumand,et al.  A review on aluminothermic reaction of Al/ZnO system , 2018 .

[10]  H. Shahverdi,et al.  Effects of Electromagnetic Frequency and SiC Nanoparticles on the Microstructure Refinement and Mechanical Properties of Al A357-1.5 wt% SiC Nanocomposites , 2018, International Journal of Metalcasting.

[11]  Rahul K Gupta,et al.  Mechanical behavior of AZ31/Al2O3 magnesium alloy nanocomposites prepared using ultrasound assisted stir casting , 2017 .

[12]  L. Ceschini,et al.  Influence of Friction Stir Processing on the Microstructure and Mechanical Properties of a compocast AA2024-Al2O3 nanocomposite , 2016 .

[13]  B. Niroumand,et al.  A novel and facile method for silica nanoparticles synthesis from high temperature vulcanization (HTV) silicon , 2016 .

[14]  I. El-Mahallawi,et al.  Nanoreinforced Cast Al-Si Alloys with Al2O3, TiO2 and ZrO2 Nanoparticles , 2015 .

[15]  B. Niroumand,et al.  Effects of continuous and discontinuous ultrasonic treatments on mechanical properties and microstructural characteristics of cast Al413-SiCnp nanocomposite , 2014 .

[16]  A. Schwedt,et al.  Hardness and Wear Behaviour of Semi-Solid Cast A390 Alloy Reinforced with Al2O3 and TiO2 Nanoparticles , 2014 .

[17]  M. Vedani,et al.  Metal Matrix Composites Reinforced by Nano-Particles—A Review , 2014 .

[18]  Yizhong Huang,et al.  Investigation of microstructure and mechanical properties of Al6061-nanocomposite fabricated by stir casting , 2014 .

[19]  P. Stratton.  Ellingham diagrams – their use and misuse , 2013 .

[20]  B. Niroumand,et al.  Synthesis of A356–MWCNT nanocomposites through a novel two stage casting process , 2013 .

[21]  Doo Hyun Choi,et al.  Broadband dielectric characterization of TiO2 ceramics sintered through microwave and conventional processes , 2013 .

[22]  B. Niroumand,et al.  Fabrication and characterization of Al356/SiCp semisolid composites by injecting SiCp containing composite powders , 2012 .

[23]  B. Niroumand,et al.  Production of Al-Si-SiCp cast composites by injection of low-energy ball-milled Al-SiCp powder into the melt , 2012, Metals and Materials International.

[24]  B. Niroumand,et al.  Microstructure and Mechanical Properties of Al356/SiCp Cast Composites Fabricated by a Novel Technique , 2012, Journal of Materials Engineering and Performance.

[25]  L. Nastac,et al.  On microstructural refinement of an AA7449 aluminium alloy through shearing above liquidus temperature , 2011 .

[26]  Christopher D. Haines,et al.  Mechanical behavior of ultrafine-grained Al composites reinforced with B4C nanoparticles , 2011 .

[27]  B. Niroumand,et al.  Effects of reinforcement distribution on low and high temperature tensile properties of Al356/SiCp cast composites produced by a novel reinforcement dispersion technique , 2011 .

[28]  M. R. Toroghinejad,et al.  Fabrication and characterization of Al/SiCp composites by CAR process , 2011 .

[29]  B. Niroumand,et al.  Development of Al356/SiCp cast composites by injection of SiCp containing composite powders , 2011 .

[30]  M. R. Toroghinejad,et al.  Refinement of microstructure and improvement of mechanical properties of Al/Al2O3 cast composite by accumulative roll bonding process , 2011 .

[31]  M. R. Toroghinejad,et al.  Effect of particle size on microstructure and mechanical properties of composites produced by ARB process , 2011 .

[32]  I. El-Mahallawi,et al.  Influence of nanodispersions on strength–ductility properties of semisolid cast A356 Al alloy , 2010 .

[33]  B. Niroumand,et al.  Compocasting of A356-CNT composite , 2010 .

[34]  B. Niroumand,et al.  Synthesis and characterization of 356-SiCp composites by stir casting and compocasting methods , 2010 .

[35]  B. Niroumand,et al.  Mechanism of zinc oxide–aluminum aluminothermic reaction , 2010 .

[36]  S. K. Sadrnezhaad,et al.  Sintering of titania nanoceramic: Densification and grain growth , 2009 .

[37]  B. Niroumand,et al.  Synthesis of In-situ Aluminum Matrix Composite Using a New Activated Powder Injection Method , 2008 .

[38]  B. Niroumand,et al.  Compocasting of an Al-Si-SiCp Composite Using Powder Injection Method , 2008 .

[39]  E. Fras,et al.  Interaction between solidification front and alien phase particles , 2008 .

[40]  M. Starink,et al.  Precipitates and intermetallic phases in precipitation hardening Al–Cu–Mg–(Li) based alloys , 2005 .

[41]  Tsu-Wei Chou,et al.  Nanocomposites in context , 2005 .

[42]  E. Atik,et al.  The effect of precipitation-hardening conditions on wear behaviours at 2024 aluminium wrought alloy , 2003 .

[43]  K. Önel,et al.  The mechanical response of Al–Si–Mg/SiCp composite: influence of porosity , 2003 .

[44]  M. Hashmi,et al.  Particle distribution in cast metal matrix composites—Part I , 2002 .

[45]  W. Yanwen,et al.  Plastic working and superplasticity in aluminium–matrix composites reinforced with SiC particulates , 1998 .

[46]  L. Geng,et al.  Evaluation of the microstructure of in-situ reaction processed Al3Ti-Al2O3-Al composite , 1997 .

[47]  S. Ray,et al.  Synthesis of cast metal matrix particulate composites , 1993, Journal of Materials Science.

[48]  P. Withers,et al.  An introduction to metal matrix composites , 1993 .

[49]  H. Fukunaga,et al.  Preparation of intermetallic compound matrix composites by reaction squeeze casting , 1991 .