A stochastic model updating strategy-based improved response surface model and advanced Monte Carlo simulation

Abstract To improve the accuracy and efficiency of computation model for complex structures, the stochastic model updating (SMU) strategy was proposed by combining the improved response surface model (IRSM) and the advanced Monte Carlo (MC) method based on experimental static test, prior information and uncertainties. Firstly, the IRSM and its mathematical model were developed with the emphasis on moving least-square method, and the advanced MC simulation method is studied based on Latin hypercube sampling method as well. And then the SMU procedure was presented with experimental static test for complex structure. The SMUs of simply-supported beam and aeroengine stator system (casings) were implemented to validate the proposed IRSM and advanced MC simulation method. The results show that (1) the SMU strategy hold high computational precision and efficiency for the SMUs of complex structural system; (2) the IRSM is demonstrated to be an effective model due to its SMU time is far less than that of traditional response surface method, which is promising to improve the computational speed and accuracy of SMU; (3) the advanced MC method observably decrease the samples from finite element simulations and the elapsed time of SMU. The efforts of this paper provide a promising SMU strategy for complex structure and enrich the theory of model updating.

[1]  John E. Mottershead,et al.  The sensitivity method in finite element model updating: A tutorial (vol 25, pg 2275, 2010) , 2011 .

[2]  Nicholas A J Lieven,et al.  DYNAMIC FINITE ELEMENT MODEL UPDATING USING SIMULATED ANNEALING AND GENETIC ALGORITHMS , 1997 .

[3]  M. Friswell,et al.  Uncertainty identification by the maximum likelihood method , 2005 .

[4]  Olof Friberg,et al.  Updating Large Finite Element Models in Structural Dynamics , 1998 .

[5]  Wei-Xin Ren,et al.  Finite element model updating in structural dynamics by using the response surface method , 2010 .

[6]  Michael Link,et al.  Stochastic model updating—Covariance matrix adjustment from uncertain experimental modal data , 2010 .

[7]  Ramana V. Grandhi,et al.  A Bayesian approach for quantification of model uncertainty , 2010, Reliab. Eng. Syst. Saf..

[8]  Huajiang Ouyang,et al.  Parameter selection and stochastic model updating using perturbation methods with parameter weighting matrix assignment , 2012 .

[9]  Cheng-Wei Fei,et al.  Nonlinear Dynamic Probabilistic Analysis for Turbine Casing Radial Deformation Using Extremum Response Surface Method Based on Support Vector Machine , 2013 .

[10]  Hong Wang,et al.  An efficient statistically equivalent reduced method on stochastic model updating , 2013 .

[11]  Sai Hung Cheung,et al.  Stochastic sampling using moving least squares response surface approximations , 2012 .

[12]  J. Beck,et al.  Bayesian Updating of Structural Models and Reliability using Markov Chain Monte Carlo Simulation , 2002 .

[13]  Wei-Xin Ren,et al.  Parameter variability estimation using stochastic response surface model updating , 2014 .

[14]  Cheng-Wei Fei,et al.  Probabilistic Design of HPT Blade-Tip Radial Running Clearance with Distributed Collaborative Response Surface Method , 2015 .

[15]  Michael I. Friswell,et al.  The adjustment of structural parameters using a minimum variance estimator , 1989 .

[16]  L. Swiler,et al.  Construction of response surfaces based on progressive-lattice-sampling experimental designs with application to uncertainty propagation , 2004 .

[17]  J.E. Mottershead,et al.  Stochastic model updating: Part 2—application to a set of physical structures , 2006 .

[18]  John E. Mottershead,et al.  Finite Element Model Updating in Structural Dynamics , 1995 .

[19]  K. Choi,et al.  Efficient Response Surface Modeling by Using Moving Least-Squares Method and Sensitivity , 2005 .

[20]  Hyung-Jo Jung,et al.  A new multi-objective approach to finite element model updating , 2014 .

[21]  Ricardo Perera,et al.  A stochastic model updating method for parameter variability quantification based on response surface models and Monte Carlo simulation , 2012 .

[22]  Zhiguo Chen,et al.  Stochastic validation of structural FE-models based on hierarchical cluster analysis and advanced Monte Carlo simulation , 2013 .

[23]  John E. Mottershead,et al.  Stochastic model updating: Part 1—theory and simulated example , 2006 .

[24]  Helmut J. Pradlwarter,et al.  Uncertainty Analysis of a Large-Scale Satellite Finite Element Model , 2009 .

[25]  S. Modak.  Model updating using uncorrelated modes , 2014 .

[26]  Christopher J. Roy,et al.  A comprehensive framework for verification, validation, and uncertainty quantification in scientific computing , 2011 .

[27]  Oğuzhan Hasançebi,et al.  Linear and nonlinear model updating of reinforced concrete T-beam bridges using artificial neural networks , 2013 .

[28]  J. L. Zapico-Valle,et al.  A new method for finite element model updating in structural dynamics , 2010 .

[29]  Chun Jie Wang,et al.  A Monte Carlo simulation based inverse propagation method for stochastic model updating , 2015 .

[30]  Wei-Xin Ren,et al.  Response Surface―Based Finite-Element-Model Updating Using Structural Static Responses , 2011 .

[31]  John E. Mottershead,et al.  Modelling and updating of large surface-to-surface joints in the AWE-MACE structure , 2006 .

[32]  Subrata Chakraborty,et al.  Adaptive response surface based efficient Finite Element Model Updating , 2014 .

[33]  John E. Mottershead,et al.  Model Updating In Structural Dynamics: A Survey , 1993 .

[34]  Tshilidzi Marwala,et al.  Finite Element Model Updating Using Wavelet Data and Genetic Algorithm , 2002 .

[35]  Cheng-Wei Fei,et al.  Reliability and sensitivity analyses of HPT blade-tip radial running clearance using multiply response surface model , 2014 .

[36]  Cheng-Wei Fei,et al.  Distributed collaborative probabilistic design for turbine blade-tip radial running clearance using support vector machine of regression , 2014 .

[37]  W. Ren,et al.  An interval model updating strategy using interval response surface models , 2015 .

[38]  M. Friswell,et al.  Perturbation methods for the estimation of parameter variability in stochastic model updating , 2008 .

[39]  J. Mottershead,et al.  Interval model updating with irreducible uncertainty using the Kriging predictor , 2011 .