Development of novel direct-injection diesel engine combustion chamber designs using computational fluid dynamics
暂无分享,去创建一个
[1] Rolf D. Reitz,et al. Multidimensional modeling of combustion for a six-mode emissions test cycle on a DI diesel engine , 1997 .
[2] R. Reitz,et al. A temperature wall function formulation for variable-density turbulent flows with application to engine convective heat transfer modeling , 1997 .
[3] Yong Liu,et al. Modeling of NOx Emissions with Comparison to Exhaust Measurements for a Gas Fuel Converted Heavy-Duty Diesel Engine , 1996 .
[4] Rolf D. Reitz,et al. Exploring the Use of Multiple Injectors and Split Injection to Reduce DI Diesel Engine Emissions , 1996 .
[5] Yoshinaka Takeda,et al. Emission Characteristics of Premixed Lean Diesel Combustion with Extremely Early Staged Fuel Injection , 1996 .
[6] C. Rutland,et al. Modeling the Effects of Intake Generated Turbulence and Resolved Flow Structures on Combustion in DI Diesel Engines , 1996 .
[7] Rolf D. Reitz,et al. Mechanism of Soot and NOx Emission Reduction Using Multiple-injection in a Diesel Engine , 1996 .
[8] Christopher J. Rutland,et al. Modeling the Effects of Intake Flow Characteristics on Diesel Engine Combustion , 1995 .
[9] Song-Charng Kong,et al. The Development and Application of a Diesel Ignition and Combustion Model for Multidimensional Engine Simulation , 1995 .
[10] Rolf D. Reitz,et al. Reducing Particulate and NOx Using Multiple Injections and EGR in a D.I. Diesel , 1995 .
[11] Rolf D. Reitz,et al. Development and testing of diesel engine CFD models , 1995 .
[12] R. Reitz,et al. Turbulence Modeling of Internal Combustion Engines Using RNG κ-ε Models , 1995 .
[13] R. Reitz,et al. Modeling the Effects of Fuel Injection Characteristics on Diesel Engine Soot and NOx Emissions , 1994 .
[14] Tadashi Murayama,et al. Simultaneous Reduction of NOx and Smoke of Diesel Engines without Sacrificing Thermal Efficiency. , 1994 .
[15] A. P. Watkins,et al. A contribution to the design of a novel direct- injection diesel engine combustion system— analysis of pip size , 1993 .
[16] A. A. Amsden,et al. KIVA3. A KIVA Program With Block-Structured Mesh for Complex Geometries , 1993 .
[17] G. Takeshi Sato,et al. Development of low NOx emission diesel engine by impingment of fuel jet , 1992 .
[18] Rolf D. Reitz,et al. Modeling Diesel Engine Spray Vaporization and Combustion , 1992 .
[19] F. E. Corcione,et al. Improvement of Combustion System of a Small D.I. Diesel Engine for Low Exhaust Emissions , 1991 .
[20] R. Reitz. Modeling atomization processes in high-pressure vaporizing sprays , 1987 .
[21] Frediano V. Bracco,et al. Comparisons of computed and measured premixed charge engine combustion , 1985 .
[22] L. Kirsch,et al. The autoignition of hydrocarbon fuels at high temperatures and pressures—Fitting of a mathematical model , 1977 .
[23] H. Hiroyasu,et al. Models for combustion and formation of nitric oxide and soot in direct injection diesel engines. SAE Paper 760129 , 1976 .
[24] C. Bowman. Kinetics of pollutant formation and destruction in combustion , 1975 .
[25] J. Nagle,et al. OXIDATION OF CARBON BETWEEN 1000–2000°C , 1962 .