Seismic response of CFS shear walls sheathed with nailed gypsum panels: Numerical modelling
暂无分享,去创建一个
Raffaele Landolfo | Luigi Fiorino | Vincenzo Macillo | Sarmad Shakeel | R. Landolfo | S. Shakeel | L. Fiorino | V. Macillo
[1] Raffaele Landolfo,et al. Experimental characterization of quick mechanical connecting systems for cold-formed steel structures , 2017 .
[2] Raffaele Landolfo,et al. Experimental tests on typical screw connections for cold-formed steel housing , 2007 .
[3] V. Kalyanaraman,et al. Modelling hysteretic behaviour of cold-formed steel wall panels , 2013 .
[4] Raffaele Landolfo,et al. Designing CFS structures: The new school bfs in naples , 2014 .
[5] Lei Xu,et al. Simplified nonlinear finite element analysis of buildings with CFS shear wall panels , 2011 .
[6] Raffaele Landolfo,et al. Sheathed cold-formed steel housing: A seismic design procedure , 2009 .
[7] Luís Simões da Silva,et al. Design of Steel Structures: Eurocode 3: Design of Steel Structures, Part 1-1: General Rules and Rules for Buildings , 2010 .
[8] Greg Foliente,et al. Hysteresis Modeling of Wood Joints and Structural Systems , 1995 .
[9] Colin A. Rogers,et al. Numerical evaluation: AISI S400 steel-sheathed CFS framed shear wall seismic design method , 2015 .
[10] Stephen G. Buonopane,et al. Computationally Efficient Fastener-Based Models of Cold-Formed Steel Shear Walls with Wood Sheathing , 2015 .
[11] Dan Dubina,et al. Performance of wall-stud cold-formed shear panels under monotonic and cyclic loading. Part II: Numerical modelling and performance analysis , 2004 .
[12] Raffaele Landolfo,et al. Shake table tests of a full-scale two-story sheathing-braced cold-formed steel building , 2017 .
[13] B. Rafezy,et al. Seismic behavior of steel sheathed cold-formed steel shear wall: Experimental investigation and numerical modeling , 2015 .
[14] Raffaele Landolfo,et al. Performance-based design of sheathed CFS buildings in seismic area , 2012 .
[15] Chu Ding. Monotonic and Cyclic Simulation of Screw-Fastened Connections for Cold-Formed Steel Framing , 2015 .
[16] Stephen G. Buonopane,et al. Seismic Modeling and Incremental Dynamic Analysis of the Cold-Formed Steel Framed CFS-NEES Building , 2016 .
[17] Stephen G. Buonopane,et al. Seismic Response and Engineering of Cold-formed Steel Framed Buildings , 2016 .
[18] Raffaele Landolfo,et al. Experimental Tests for the Seismic Response Evaluation of Cold-Formed Steel Shear Walls Sheathed with Nailed Gypsum Boards , 2016 .
[19] Raffaele Landolfo,et al. Seismic analysis of sheathing-braced cold-formed steel structures , 2012 .
[20] L. Lowes,et al. A Beam-Column Joint Model for Simulating the Earthquake Response of Reinforced Concrete Frames , 2004 .
[21] D Dubina,et al. PERFORMANCE OF WALL-STUD COLD-FORMED SHEAR PANELS UNDER MONOTONIC AND CYCLIC LOADING PART I: EXPERIMENTAL RESEARCH , 2004 .
[22] Nouredine Bourahla,et al. Deteriorating hysteresis model for cold-formed steel shear wall panel based on its physical and mechanical characteristics , 2016 .
[23] José Miguel Castro,et al. Seismic design procedure for cold-formed steel sheathed shear wall frames: Proposal and evaluation , 2017 .
[24] Colin A. Rogers,et al. Steel sheathed/CFS framed shear walls under dynamic loading: Numerical modelling and calibration , 2013 .
[25] Mahen Mahendran,et al. Behaviour and Design of Cold-formed Steel Wall Frames Lined With Plasterboard on Both Sides , 2004 .
[26] Luis Ibarra,et al. Development of a testing protocol for woodframe structures , 1999 .
[27] Raffaele Landolfo,et al. Seismic response of CFS shear walls sheathed with nailed gypsum panels: Experimental tests , 2017 .