Comparing simulation modelling and measurement results of polarization/depolarization current analysis on various underground cable insulation systems

Continuous application of high voltages in an underground cable can cause slow deterioration of its insulation system. Electronic charges can be generated within the medium of the material and this can lead to permanent change of its dielectric properties to withstand high electrical stresses. The long-term degradation of underground cable insulation plays an important role in its eventual breakdown event. One of the ways to assess the insulation condition of an underground cable is by measuring its polarization and depolarization currents (PDC). This technique has been widely used in assessing the performance of transformer insulation system, but can also be used to monitor the degradation within a cable to some extent. The paper aims to describe thoroughly the principle mechanism of PDC and how it can be used to monitor the condition of cable insulation. A simulation model has been developed based on theoretical conjectures of PDC in an ideal cable. The simulation results were then compared with PDC experimental measurements using new unused cables. In addition to this, simulated PDC currents for cables that are subjected to various degrees of degradation were also analyzed in order to deduce severity categorization for replacement exercise of in-service cables. By comparing the simulated data with the experimental results, it is hoped that a clearer understanding on the PDC mechanisms within underground cable insulation can be achieved.

[1]  Robert J. Ross,et al.  Dielectric properties of water trees , 2000, Proceedings of the 6th International Conference on Properties and Applications of Dielectric Materials (Cat. No.00CH36347).

[2]  H. Faremo,et al.  Understanding water treeing mechanisms in the development of diagnostic test methods , 1998 .

[3]  A.J. Thomas,et al.  A new dielectric response model for water tree degraded XLPE insulation - part a: model development with small sample verification , 2008, IEEE Transactions on Dielectrics and Electrical Insulation.

[4]  S. A. Bhumiwat.  Field experience in insulation diagnosis of industrial high voltage motors using dielectric response technique , 2009, 2009 IEEE Electrical Insulation Conference.

[5]  David Birtwhistle,et al.  Condition assessment of XLPE cable insulation using short-time polarisation and depolarisation current measurements , 2008 .

[6]  W. Zaengl,et al.  A novel, compact instrument for the measurement and evaluation of relaxation currents conceived for on-site diagnosis of electric power apparatus , 2000, Conference Record of the 2000 IEEE International Symposium on Electrical Insulation (Cat. No.00CH37075).

[7]  S. Cherukupalli,et al.  Condition assessment of distribution PILC cables from electrical, chemical, and dielectric measurements , 2004, IEEE Electrical Insulation Magazine.

[8]  J. Kuffel,et al.  High Voltage Engineering: Fundamentals , 1984 .

[9]  T. Dakin,et al.  Conduction and polarization mechanisms and trends in dielectric , 2006, IEEE Electrical Insulation Magazine.

[10]  Takashi Maeno,et al.  Estimation of conductivity and permittivity of water trees in PE from space charge distribution measurements , 2001 .

[11]  Ying Li,et al.  Experimental investigation on the cause of harmfulness of the blue water tree to XLPE cable insulation , 1999 .

[12]  S. Sulaiman,et al.  Analysis of cable insulation condition using dielectric spectroscopy and polarization / depolarization current techniques , 2012, 2012 IEEE International Conference on Condition Monitoring and Diagnosis.

[13]  Erling Ildstad.  Dielectric response for condition assessment of PILC distribution cables , 2003, 2003 Annual Report Conference on Electrical Insulation and Dielectric Phenomena.

[14]  R. Eriksson,et al.  Diagnosis of moisture in oil/paper distribution cables - Part I: Estimation of moisture content using frequency-domain spectroscopy , 2002, IEEE Transactions on Power Delivery.

[15]  Supatra A. Bhumiwat.  On-site non-destructive diagnosis of in-service power cables by Polarization / Depolarization Current analysis , 2010, 2010 IEEE International Symposium on Electrical Insulation.