The Synergy of Double Cross-linking Agents on the Properties of Styrene Butadiene Rubber Foams

[1]  Jie Kong,et al.  Self-toughening of epoxy resin through controlling topology of cross-linked networks , 2016 .

[2]  Jie Kong,et al.  Intramolecular cyclization of long-chain hyperbranched polymers (HyperMacs) from A2 + Bn step-wise polymerization , 2016 .

[3]  D. Jia,et al.  Morphology and performance of styrene butadiene rubber filled with modified graphite nanoplatelet and carbon black , 2016 .

[4]  Jie Kong,et al.  Hyperbranched polymers from A2 + B3 strategy: recent advances in description and control of fine topology , 2016 .

[5]  Jiaming Wu,et al.  Reduced graphene oxide deposited carbon fiber reinforced polymer composites for electromagnetic interference shielding , 2016 .

[6]  Chul B. Park,et al.  Fabrication and Characterization of Closed-Cell Rubber Foams Based on Natural Rubber/Carbon Black by One-Step Foam Processing , 2016 .

[7]  Wei Zhao,et al.  Effects of firing temperature on the microstructures and properties of porous mullite ceramics prepared by foam-gelcasting , 2016 .

[8]  Qiuyu Zhang,et al.  Functionalized graphite nanoplatelets/epoxy resin nanocomposites with high thermal conductivity , 2016 .

[9]  Jianzhong Ma,et al.  Wear-resistant EPDM/silicone rubber foam materials , 2016, Journal of Porous Materials.

[10]  P. Khobragade,et al.  Physicomechanical properties of wollastonite (CaSiO3)/styrene butadiene rubber (SBR) nanocomposites , 2015 .

[11]  Z. Jia,et al.  A method to improve the mechanical performance of styrene-butadiene rubber via vulcanization accelerator modified silica , 2015 .

[12]  V. Causin,et al.  Enhanced morphology and mechanical characteristics of clay/styrene butadiene rubber nanocomposites , 2015 .

[13]  R. Suntako.  Effect of zinc oxide nanoparticles synthesized by a precipitation method on mechanical and morphological properties of the CR foam , 2015, Bulletin of Materials Science.

[14]  Guangxian Li,et al.  Effect of nanosilica-based immobile antioxidant on thermal oxidative degradation of SBR , 2015 .

[15]  Binghong Luo,et al.  The improvement of mechanical performance and water-response of carboxylated SBR by chitin nanocrystals , 2015 .

[16]  E. Morozov,et al.  Behaviour of PU-foam/glass-fibre composite sandwich panels under flexural static load , 2015 .

[17]  D. Jia,et al.  The use of zinc dimethacrylate functionalized graphene as a reinforcement in rubber composites , 2015 .

[18]  Qiuyu Zhang,et al.  High thermal conductivity graphite nanoplatelet/UHMWPE nanocomposites , 2015 .

[19]  G. Amiri,et al.  Influence of dysprosium addition on the structural, morphological, electrical and magnetic properties of nano-crystalline W-type hexaferrites , 2015, Bulletin of Materials Science.

[20]  G. Suppes,et al.  Impact of the maximum foam reaction temperature on reducing foam shrinkage , 2015 .

[21]  Jie Kong,et al.  Topological analysis and intramolecular cyclic feature evaluation of polymers derived from Am + Bn step-growth polymerization , 2015 .

[22]  Christopher J. Ellison,et al.  Nanocomposites from styrene–butadiene rubber (SBR) and multiwall carbon nanotubes (MWCNT) part 2: Mechanical properties , 2015 .

[23]  M. T. Khan,et al.  Auxetic Nanocomposite based on Styrene Butadiene Rubber (SBR) Foam with Varying Nano-carbon Loading , 2015 .

[24]  Raj Das,et al.  Effects of cell size and cell wall thickness variations on the stiffness of closed-cell foams , 2015 .

[25]  D. Jia,et al.  Reinforcing styrene butadiene rubber with lignin-novolac epoxy resin networks , 2015 .

[26]  Pj Piet Lemstra,et al.  Crystallization behavior of partially crosslinked poly(β‐hydroxyalkonates)/poly(butylene succinate) blends , 2014 .

[27]  S. K. Srivastava,et al.  EPDM/silicone blend layered silicate nanocomposite by solution intercalation method: Morphology and properties , 2014 .

[28]  D. Langevin,et al.  Foams stabilised by mixtures of nanoparticles and oppositely charged surfactants: relationship between bubble shrinkage and foam coarsening. , 2014, Soft matter.

[29]  Shengyu Feng,et al.  Curing characteristics, morphology, thermal stability, mechanical properties, and irradiation resistance of methylethylsilicone/methylphenylsilicone rubber blends , 2014 .

[30]  M. Panhuis,et al.  Reinforcing biopolymer hydrogels with ionic-covalent entanglement hydrogel microspheres , 2014 .

[31]  Chul B. Park,et al.  Lightweight polypropylene/stainless-steel fiber composite foams with low percolation for efficient electromagnetic interference shielding. , 2014, ACS applied materials & interfaces.

[32]  Kang-Suk Lee,et al.  Ethylene–propylene-diene terpolymer/halloysite nanocomposites: Thermal, mechanical properties, and foam processing , 2014 .

[33]  Jianzhong Ma,et al.  Compatibilization and properties of ethylene vinyl acetate copolymer (EVA) and thermoplastic polyurethane (TPU) blend based foam , 2014, Polymer Bulletin.

[34]  Huang Yong,et al.  Tunable sound absorption of silicone rubber materials via mesoporous silica , 2014 .

[35]  Jie Kong,et al.  Terminal index: a new way for precise description of topologic structure of highly branched polymers derived from A2 + B3 stepwise polymerization. , 2014, The journal of physical chemistry. B.

[36]  P. Le Bars,et al.  Technological Process to Control the Foam Dielectric Constant Application to Microwave Components and Antennas , 2014, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[37]  N. Iqbal,et al.  Structural, viscoelastic, and vulcanization study of sponge ethylene–propylene–diene monomer composites with various carbon black loadings , 2014 .

[38]  F. Lagarde,et al.  Raman spectroscopy and thermal analysis of gum and silica-filled NR/SBR blends prepared from latex system , 2013 .

[39]  Q. Zhong,et al.  Foaming behavior of microcellular foam polypropylene/modified nano calcium carbonate composites , 2013 .

[40]  Xu Wang,et al.  Effect of precured degrees on morphology, thermal, and mechanical properties of BR/SBR/NR foams , 2013 .

[41]  Jianzhong Ma,et al.  Morphology and mechanical properties of EVA/OMMT nanocomposite foams , 2013 .

[42]  Jianzhong Ma,et al.  Effect of Organic Montmorillonite on the Cellular Structure and Mechanical Properties of POE/EVA/OMMT Nanocomposite Foams , 2013 .

[43]  A. Sulong,et al.  Analysis of warpage and shrinkage properties of injection-molded micro gears polymer composites using numerical simulations assisted by the Taguchi method , 2012 .

[44]  R. Avolio,et al.  Isothermal and nonisothermal crystallization of HDPE composites containing multilayer carton scraps as filler , 2012 .

[45]  Jianzhong Ma,et al.  Effect of modification of montmorillonite on the cellular structure and mechanical properties of ethylene vinyl acetate/clay nanocomposite foams , 2012 .

[46]  Duan Zhou-yang.  Foamed materials from POE/EVA blends , 2012 .

[47]  Z. Zhang,et al.  Properties of chlorinated polyethylene rubber/ethylene vinyl acetate copolymer blend‐based foam , 2012 .

[48]  Gue-Hyun Kim,et al.  Improvement of Tensile Properties and Elastic Recovery in Ethylene Vinyl Acetate Copolymer/Multiwalled Carbon Nanotube Nanocomposite Foams , 2011 .

[49]  L. Schadler,et al.  An experimental and theoretical investigation of the compressive properties of multi-walled carbon nanotube/poly(methyl methacrylate) nanocomposite foams , 2011 .

[50]  S. Kuo,et al.  Thermal and mechanical properties of microcellular thermoplastic SBS/PS/SBR blend: effect of crosslinking , 2011 .

[51]  C. S. Sipaut,et al.  Correlation between the acoustic and dynamic mechanical properties of natural rubber foam: Effect of foaming temperature , 2011 .

[52]  Jin Kuk Kim,et al.  Effect of carbon black content on microcellular structure and physical properties of chlorinated polyethylene rubber foams , 2010 .

[53]  Gue-Hyun Kim,et al.  Ethylene vinyl acetate copolymer (EVA)/multiwalled carbon nanotube (MWCNT) nanocomposite foams , 2009 .

[54]  Z. Yuqing,et al.  Preparation and Characterization of Graft Copolymer EVA-g-PU , 2008 .

[55]  Jin Fu,et al.  Constitutive modeling for characterizing the compressive behavior of PMMA open‐cell foams , 2007 .

[56]  Xin Wang,et al.  Hyperbranched polycarbosiloxane with dendritic boron cores: Synthesis, characterization, and structure regulation , 2006 .

[57]  Sung‐Seen Choi,et al.  Influence of filler type and content on properties of styrene-butadiene rubber (SBR) compound reinforced with carbon black or silica , 2004 .

[58]  M. Hussein,et al.  Self-assembled of nanolayered 2-acryamido-2-methylpropane sulfonate in the Zn/Al layered double hydroxide lamella , 2001 .

[59]  P. Pimienta,et al.  Mechanical Properties , 2018, Bainite in Steels.

[60]  M. Schneider,et al.  Toughening of polystyrene by natural rubber-based composite particles: Part II Influence of the internal structure of PMMA and PS-grafted core-shell particles , 1997 .

[61]  V. Brucato,et al.  Modified thermal diffusivity in the simulation of injection mould filling with crystalline polymers , 1989 .

[62]  K. J. Packer,et al.  13C solid-state nuclear magnetic resonance spectra of some air-cured alkyd polyester paints , 1987 .