Three-dimensional multidirectional inductance coil owning environmental conformal feature for wireless power transfer

For wireless power transfer (WPT) application with multi-load or multi-repeater, the system must need some inductance coil possessing the characteristic of transmitting power to multiple directions. This paper proposes a novel three-dimensional hexagon coil with simple structure, which is fabricated conveniently and easy to conformal with surrounding environment. The formula to calculate selfand mutual-inductances for the coil are given with the direction feature also introduced. Furthermore, numerical simulations and experimental results show mutual inductance is very stable in a wide scope of direction angle, to be applied in WPT with multidirectional transmission characteristics.

[1]  G. G. Stokes "J." , 1890, The New Yale Book of Quotations.

[2]  Takehiro Imura,et al.  Maximizing Air Gap and Efficiency of Magnetic Resonant Coupling for Wireless Power Transfer Using Equivalent Circuit and Neumann Formula , 2011, IEEE Transactions on Industrial Electronics.

[3]  Songcheol Hong,et al.  Effect of Coupling Between Multiple Transmitters or Multiple Receivers on Wireless Power Transfer , 2013, IEEE Transactions on Industrial Electronics.

[4]  M. Soljačić,et al.  Efficient wireless non-radiative mid-range energy transfer , 2006, physics/0611063.

[5]  Jong-Won Yu,et al.  Contactless Energy Transfer Systems Using Antiparallel Resonant Loops , 2013, IEEE Transactions on Industrial Electronics.

[6]  Zhengming Zhao,et al.  Employing Load Coils for Multiple Loads of Resonant Wireless Power Transfer , 2015, IEEE Transactions on Power Electronics.

[7]  S. Y. Ron Hui,et al.  Two- and Three-Dimensional Omnidirectional Wireless Power Transfer , 2014, IEEE Transactions on Power Electronics.

[9]  J. Bernhard,et al.  Development of a Wireless Power Transmission System for Embedded Passive Sensors Using LF RFID Technology , 2012, 2012 Fourth International EURASIP Workshop on RFID Technology.

[10]  Milan M. Jovanovic,et al.  A contactless electrical energy transmission system for portable-telephone battery chargers , 2003, IEEE Trans. Ind. Electron..

[11]  Young-Jin Park,et al.  Optimal design of a wireless power transfer system with multiple self-resonators for an LED TV , 2012, IEEE Transactions on Consumer Electronics.

[12]  Shahriar Mirabbasi,et al.  Design and Optimization of Resonance-Based Efficient Wireless Power Delivery Systems for Biomedical Implants , 2011, IEEE Transactions on Biomedical Circuits and Systems.

[13]  Jun Zhao,et al.  Analysis of Wireless Energy Transmission for Implantable Device Based on Coupled Magnetic Resonance , 2012, IEEE Transactions on Magnetics.

[14]  José Francisco Sanz Osorio,et al.  Optimal Design of ICPT Systems Applied to Electric Vehicle Battery Charge , 2009, IEEE Transactions on Industrial Electronics.