Energy efficiency and the influence of gas burners to the energy related carbon dioxide emissions of electric arc furnaces in steel industry

Determining the complete energy balance of an electric arc furnace (EAF) provides an appropriate method to examine energy efficiency and identify energy saving potentials. However, the EAF energy balance is complex due to the combined input of electrical energy and chemical energy resulting from natural gas (NG) combustion and oxidation reactions in the steel melt. In addition, furnace off-gas measurements and slag analysis are necessary to reliably determine energy sinks. In this paper 70 energy balances and energy efficiencies from multiple EAFs are presented, including data calculated from plant measurements and compiled from the literature. Potential errors that can be incorporated in these calculations are also highlighted. The total energy requirement of these modern EAFs analysed ranged from 510 to 880kWh/t, with energy efficiency values (η=ΔHSteel/ETotal) of between 40% and 75%. Furthermore, the focus was placed on the total energy related CO2 emissions of EAF processes comprising NG combustion and electrical energy input. By assessing multiple EAF energy balances, a significant correlation between the total energy requirement and energy related specific CO2 emissions was not evident. Whilst the specific consumption of NG in the EAF only had a minor impact on the EAF energy efficiency, it decreased the specific electrical energy requirement and increased EAF productivity where transformer power was restricted. The analysis also demonstrated that complementing and substituting electrical energy with NG was beneficial in reducing the total energy related CO2 emissions when a certain level of substitution efficiency was achieved. Therefore, the appropriate use of NG burners in modern EAFs can result in an increased EAF energy intensity, whilst the total energy related CO2 emissions remain constant or are even decreased.

[1]  Ernst Worrell,et al.  Energy use and CO2 emissions in Mexico's iron and steel industry , 2002 .

[2]  John Stubbles,et al.  Energy use in the U.S. steel industry: a historical perspective and future opportunities , 2000 .

[3]  Tunable diode laser measurements of CO, H2O, and temperature near 1.56 µm for steelmaking furnace pollution control and energy efficiency , 2005 .

[4]  G. Fodor,et al.  STRESSOMETER FLATNESS CONTROL USING INTRANET TECHNOLOGIES , 1999 .

[5]  Herbert Pfeifer,et al.  Off-gas measurements for mass and energy balances of stainless steel EAF. , 2001 .

[6]  N. Margolis,et al.  Energy and environmental profile of the U.S. iron and steel industry , 1997 .

[7]  Ernst Worrell,et al.  International comparison of CO2 emission trends in the iron and steel industry , 2002 .

[8]  K. Krüger,et al.  Energieverbrauch und Produktivität von Lichtbogenöfen , 1996 .

[9]  Hans Sandberg,et al.  CO2 emissions of the Swedish steel industry , 2001 .

[10]  Li Ji,et al.  Energy use and carbon dioxide emissions from steel production in China , 2002 .

[11]  R. J. Fruehan,et al.  Theoretical Minimum Energies to Produce Steel for Selected Conditions , 2000 .

[12]  Yasuo Suzuoki,et al.  Effective utilization of by-product oxygen from electrolysis hydrogen production , 2005 .

[13]  Ernst Worrell,et al.  Exergy accounting of energy and materials flows in steel production systems , 2001 .

[14]  M. Kendall,et al.  A window into the electric ARC furnace, a continuous temperature sensor measuring the complete furnace cycle , 2008 .

[15]  Ernst Worrell,et al.  Energy Efficiency Opportunities in Electric Arc Steelmaking , 1999 .

[16]  Ernst Worrell,et al.  Energy efficiency and carbon dioxide emissions reduction opportunities in the US iron and steel sector , 2001 .

[17]  Satish K. Singh,et al.  Simulation of energy dynamics of electric furnace steelmaking using DRI , 2007 .

[18]  Ernst Worrell,et al.  Energy use and carbon dioxide emissions in energy-intensive industries in key developing countries , 1999 .