Binderless Fiberboards Made from Unripe Coconut Husks

[1]  Shigehiko Suzuki,et al.  Reinforcement of fiberboard containing lingo-cellulose nanofiber made from wood fibers , 2016, Journal of Wood Science.

[2]  Junyou Shi,et al.  Formulation of a novel soybean protein‐based wood adhesive with desired water resistance and technological applicability , 2016 .

[3]  Muhammad Khusairy Bin Bakri,et al.  Acoustical, thermal, and morphological properties of zein reinforced oil palm empty fruit bunch fiber bio-composites , 2016 .

[4]  Zuraida Ahmad,et al.  A review of natural fibers and processing operations for the production of binderless boards , 2016, BioResources.

[5]  A. Hassanin,et al.  Novel composite sandwich structure from green materials: Mechanical, physical, and biological evaluation , 2015 .

[6]  D. Bhattacharyya,et al.  Dimensional stability improvement of kenaf panels by post-manufacturing hygrothermal treatments using response surface methodology , 2015 .

[7]  Philippe Evon,et al.  Influence of thermo-pressing conditions on the mechanical properties of biodegradable fiberboards made from a deoiled sunflower cake , 2015 .

[8]  H. R. Taghiyari,et al.  Correlation between sound absorption coefficients with physical and mechanical properties of insulation boards made from sugar cane bagasse , 2014 .

[9]  R. Sun,et al.  Chemical Changes of Raw Materials and Manufactured Binderless Boards during Hot Pressing: Lignin Isolation and Characterization , 2014 .

[10]  Khalid Fares,et al.  Characterization of date palm lignocellulosic by-products and self-bonded composite materials obtained thereof , 2013 .

[11]  J. Malvestio,et al.  3D mechanical analysis of low-density wood-based fiberboards by X-ray microcomputed tomography and Digital Volume Correlation , 2013, Journal of Materials Science.

[12]  K. Umemura,et al.  Characterization of bagasse binderless particleboard manufactured in high-temperature range , 2013, Journal of Wood Science.

[13]  Joan Salvadó,et al.  Feasibility of incorporating treated lignins in fiberboards made from agricultural waste. , 2012, Waste management.

[14]  Masatoshi Sato,et al.  Properties of binderless particleboard panels manufactured from oil palm biomass , 2012, BioResources.

[15]  Simon Curling,et al.  A rapid method for investigating the absorption of formaldehyde from air by wool , 2012, Journal of Materials Science.

[16]  Raf Dewil,et al.  Fundamentals, kinetics and endothermicity of the biomass pyrolysis reaction , 2010 .

[17]  Sören Halvarsson.  Manufacture of straw MDF and fibreboards , 2010 .

[18]  Jorge A. Velásquez,et al.  Binderless fiberboard from steam exploded banana bunch , 2009 .

[19]  C. Wood,et al.  Biorefinery: Conversion of Woody Biomass to Chemicals, Energy and Materials , 2008 .

[20]  I. O. Mazali,et al.  Biomorphic activated porous carbons with complex microstructures from lignocellulosic residues , 2008 .

[21]  Haiping Yang,et al.  Characteristics of hemicellulose, cellulose and lignin pyrolysis , 2007 .

[22]  S. Saka,et al.  Condensation Reactions of Some Lignin Related Compounds at Relatively Low Pyrolysis Temperature , 2007 .

[23]  John C. F. Walker.  Water in wood , 2006 .

[24]  N. Okuda,et al.  Chemical changes of kenaf core binderless boards during hot pressing (I): influence of the pressing temperature condition , 2006, Journal of Wood Science.

[25]  M. Funaoka,et al.  Condensation of lignin during heating of wood , 1990, Wood Science and Technology.

[26]  M.J.A. van den Oever,et al.  Process for production of high density/high performance binderless boards from whole coconut husk: Part 2: Coconut husk morphology, composition and properties , 2004 .

[27]  M.J.A. van den Oever,et al.  Process for production of high density/high performance binderless boards from whole coconut husk: Part 1: Lignin as intrinsic thermosetting binder resin , 2004 .

[28]  N. Laemsak,et al.  Development of boards made from oil palm frond II: properties of binderless boards from steam-exploded fibers of oil palm frond , 2000, Journal of Wood Science.

[29]  Amie D. Sluiter,et al.  Determination of Structural Carbohydrates and Lignin in Biomass , 2004 .

[30]  J. Kadla,et al.  Microanalytical method for the characterization of fiber components and morphology of woody plants. , 2002, Journal of agricultural and food chemistry.

[31]  K. Iiyama,et al.  Preparation of Binderless Boards from Steam Exploded Pulps of Oil Palm (Elaeis guneensis Jaxq.) Fronds and Structural Characteristics of Lignin and Wall Polysaccharides in Steam Exploded Pulps to be Discussed for Self-Bindings , 1998 .

[32]  R. Barkhau.  The preparation, characterization, and condensation reactions of polymer-supported lignin models , 1989 .

[33]  E. Back.  The Bonding Mechanism in Hardboard Manufacture Review Report , 2009 .

[34]  L. K. Mudge,et al.  Fundamentals of thermochemical biomass conversion , 1985 .

[35]  M. J. Effland.  Modified procedure to determine acid-insoluble lignin in wood and pulp. , 1977 .