Experimental investigation of the time-dependent response of unreinforced and reinforced tunnel faces in cohesive soils

In spite of the increasing diffusion of tunnel boring machines, conventional tunnelling is still preferred for economic reasons in case of short tunnels, unconventional cross sections or irregular tunnel trajectories. In conventional tunnelling, the mechanical response of the tunnel front is a main concern and, when tunnels are excavated in cohesive soils, this is dominated by the time factor, related to geometry, to the mean excavation rate and to the hydro-mechanical properties of the materials involved. This is particularly evident during excavation standstill: front displacements progressively increase with time and, in many cases, the system response under long-term conditions becomes unstable. In conventional tunnelling, a common technique employed to improve the system response (under both short- and long-term conditions) is the installation of fibreglass tubes within the advance core. In this paper, the mechanical response of both unreinforced and reinforced deep tunnel fronts in cohesive soils is experimentally analysed. In particular, the results of a series of 1 g small-scale tests, taking into account both the influence of the excavation rate (the unloading time) on the system response and the evolution with time of the tunnel face displacements, induced by a rapid reduction in the horizontal stress applied on the tunnel face, are reported.

[1]  Bengt B. Broms,et al.  STABILITY OF CLAY AT VERTICAL OPENINGS , 1967 .

[2]  A. S. Osman,et al.  2D and 3D upper bound solutions for tunnel excavation using ‘elastic’ flow fields , 2007 .

[3]  Wei Wu,et al.  Centrifuge model test on the face stability of shallow tunnel , 2011 .

[4]  Georg Anagnostou,et al.  Analysis of the stand-up time of the tunnel face , 2013 .

[5]  J. K. Mitchell,et al.  STAND-UP TIME OF TUNNELS IN SQUEEZING GROUND - 1. A PHYSICAL MODEL STUDY - 2. GENERAL CONSTITUTIVE. , 1977 .

[6]  Norbert Vogt,et al.  Time dependent deformations during tunnelling and stability of tunnel faces in fine-grained soils under groundwater , 2008 .

[7]  E. Leca,et al.  Upper and lower bound solutions for the face stability of shallow circular tunnels in frictional material , 1990 .

[8]  D Dias,et al.  Extrusion analysis of a bolt-reinforced tunnel face with finite ground-bolt bond strength , 2004 .

[9]  J. Booker,et al.  Cavity expansion in cohesive frictional soils , 1986 .

[10]  Abdul-Hamid Soubra,et al.  Face Stability Analysis of Circular Tunnels Driven by a Pressurized Shield , 2010 .

[11]  Daniel Dias,et al.  Extrusion movements of a tunnel head reinforced by finite length bolts—a closed-form solution using homogenization approach , 2000 .

[12]  Robert J. Mair,et al.  Centrifugal modelling of tunnel construction in soft clay , 1980 .

[13]  P. Chadwick,et al.  THE QUASI-STATIC EXPANSION OF A SPHERICAL CAVITY IN METALS AND IDEAL SOILS , 1959 .

[14]  Ashish Juneja,et al.  Centrifuge modelling of tunnel face reinforcement using forepoling , 2010 .

[15]  S. Sloan Geotechnical stability analysis , 2013 .

[16]  P. Chambon,et al.  Shallow tunnels in cohesionless soil : stability of tunnel face , 1994 .

[17]  R. T. Shield,et al.  On the plastic flow of metals under conditions of axial symmetry , 1955, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[18]  M Panet,et al.  Application du calcul à la rupture à la stabilité du front de taille d’un tunnel , 1988 .

[19]  Li Jun,et al.  Experimental study on face instability of shield tunnel in sand , 2013 .

[20]  Pieter A. Vermeer,et al.  Tunnel Heading Stability in Drained Ground , 2002 .

[21]  Gholamreza Mesri,et al.  The coefficient of earth pressure at rest , 1993 .

[22]  W. A. Take,et al.  Soil deformation measurement using particle image velocimetry (PIV) and photogrammetry , 2003 .

[23]  Oh-Yeob Kwon,et al.  Model testing for pipe-reinforced tunnel heading in a granular soil , 2008 .

[24]  Daniele Peila A theoretical study of reinforcement influence on the stability of a tunnel face , 1994 .

[25]  Charles Wang Wai Ng,et al.  A three-dimensional parametric study of the use of soil nails for stabilising tunnel faces , 2002 .

[26]  H. -B. Mühlhaus Lower bound solutions for circular tunnels in two and three dimensions , 1985 .

[27]  Georg Anagnostou,et al.  Analysis method and design charts for bolt reinforcement of the tunnel face in cohesive-frictional soils , 2015 .

[28]  Chung-Sik Yoo,et al.  Deformation behaviour of tunnel face reinforced with longitudinal pipes—laboratory and numerical investigation , 2003 .

[29]  Chung-Sik Yoo,et al.  Finite-element analysis of tunnel face reinforced by longitudinal pipes , 2002 .

[30]  E. Davis,et al.  The stability of shallow tunnels and underground openings in cohesive material , 1980 .

[31]  Annamaria Cividini,et al.  A Physical and Numerical Investigation on the Stability of Shallow Tunnels in Strain Softening Media , 2004 .

[32]  DEVELOPMENT OF STABILITY RATIOS FOR TUNNELS DRIVEN IN CLAY , 1971 .

[33]  O. Kusakabe,et al.  Shield Tunnel Construction in Centrifuge , 1999 .

[34]  Georg Anagnostou,et al.  Face stability conditions with earth-pressure-balanced shields , 1996 .

[35]  Didier Subrin,et al.  Mécanisme 3D en forme de corne et influence de la profondeur , 2006 .

[36]  Charles E. Augarde,et al.  Stability of an undrained plane strain heading revisited. , 2003 .

[37]  G. Anagnostou,et al.  The contribution of horizontal arching to tunnel face stability , 2012 .

[38]  Claudio di Prisco,et al.  A numerical exercise for the definition under undrained conditions of the deep tunnel front characteristic curve , 2018 .

[39]  S. Sloan,et al.  Undrained stability of a plane strain heading , 1994 .

[40]  H. Balthaus Standsicherheit der flüssigkeitsgestützten Ortsbrust bei schildvorgetriebenen Tunneln , 1988 .

[41]  Nicolas Berthoz,et al.  Face failure in homogeneous and stratified soft ground: Theoretical and experimental approaches on 1g EPBS reduced scale model , 2012 .

[42]  T. Kimura,et al.  Centrifugal testing of model tunnels in soft clay , 1981 .

[43]  Takeo Kanade,et al.  An Iterative Image Registration Technique with an Application to Stereo Vision , 1981, IJCAI.

[44]  Hideto Mashimo,et al.  CENTRIFUGE MODEL TEST OF TUNNEL FACE REINFORCEMENT BY BOLTING , 2003 .