Manufacturing of embedded multimode waveguides by reactive lamination of cyclic olefin polymer and polymethylmethacrylate

Abstract. We demonstrate the manufacturing of embedded multimode optical waveguides through linking of polymethylmethacrylate (PMMA) foils and cyclic olefin polymer (COP) filaments based on a lamination process. Since the two polymeric materials cannot be fused together through interdiffusion of polymer chains, we utilize a reactive lamination agent based on PMMA copolymers containing photoreactive 2-acryloyloxyanthraquinone units, which allows the creation of monolithic PMMA-COP substrates through C-H insertion reactions across the interface between the two materials. We elucidate the lamination process and evaluate the chemical link between filament and foils by carrying out extraction tests with a custom-built tensile testing machine. We also show attenuation measurements of the manufactured waveguides for different manufacturing parameters. The lamination process is in particular suited for large-scale and low-cost fabrication of board-level devices with optical waveguides or other micro-optical structures, e.g., optofluidic devices.

[1]  Walter J. Riker.  A Review of J , 2010 .

[2]  Jürgen Jahns.  Photonik: Grundlagen, Komponenten und Systeme , 2000 .

[3]  H. Uchimura,et al.  Development of the "laminated waveguide" , 1998, IMS 1998.

[4]  J. Rühe,et al.  A Novel Reactive Lamination Process for the Generation of Functional Multilayer Foils for Optical Applications , 2014 .

[5]  Sergey Ten.  In-home networking using optical fiber , 2012, OFC/NFOEC.

[6]  Eduard Reithmeier,et al.  Realization and Performance of an All-Polymer Optical Planar Deformation Sensor , 2015, IEEE Sensors Journal.

[7]  Eduard Reithmeier,et al.  Cladded self-written multimode step-index waveguides using a one-polymer approach. , 2015, Optics letters.

[8]  Seoyong Shin,et al.  Highly concentrated optical fiber-based daylighting systems for multi-floor office buildings , 2014 .

[9]  N. Nguyen,et al.  Graphite-on-paper based tactile sensors using plastic laminating technique , 2015, 2015 28th IEEE International Conference on Micro Electro Mechanical Systems (MEMS).

[10]  Christian Bonten,et al.  Kunststofftechnik: Einführung und Grundlagen , 2014 .

[11]  A. Neyer,et al.  High-temperature stable flexible polymer waveguide laminates , 2006 .

[12]  Tae-Woo Lee,et al.  Flexible Lamination Encapsulation , 2015, Advanced materials.

[13]  Eduard Reithmeier,et al.  Flexible, fast, and low-cost production process for polymer based diffractive optics. , 2015, Optics express.

[14]  D. Liepmann,et al.  Encapsulation of integrated circuits in plastic microfluidic systems using hot embossing , 2015, 2015 Transducers - 2015 18th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS).