Numerical Study of the Influence of EGR on In-Cylinder Soot Characteristics in a Heavy-Duty Diesel Engine using CMC

[1]  R. Reitz,et al.  Effect of drop breakup on fuel sprays , 1986 .

[2]  K. M. Leung,et al.  A simplified reaction mechanism for soot formation in nonpremixed flames , 1991 .

[3]  A. Gosman,et al.  Development of Methodology for Spray Impingement Simulation , 1995 .

[4]  J. Dec.  A Conceptual Model of DI Diesel Combustion Based on Laser-Sheet Imaging* , 1997 .

[5]  A. Klimenko,et al.  Conditional moment closure for turbulent combustion , 1999 .

[6]  Robert W. Bilger,et al.  Modeling soot formation in turbulent methane–air jet diffusion flames , 2000 .

[7]  H. Pitsch.  Unsteady Flamelet Modeling of Differential Diffusion in Turbulent Jet Diffusion Flames , 2000 .

[8]  K. Akihama,et al.  Mechanism of the Smokeless Rich Diesel Combustion by Reducing Temperature , 2001 .

[9]  Heinz Pitsch,et al.  Effects of strain rate on high-pressure nonpremixed n-heptane autoignition in counterflow , 2004 .

[10]  M. Thomson,et al.  OPTIMIZATION OF SOOT MODELING IN TURBULENT NONPREMIXED ETHYLENE/AIR JET FLAMES , 2005 .

[11]  Rolf D. Reitz,et al.  2-Color Thermometry Experiments and High-Speed Imaging of Multi-Mode Diesel Engine Combustion , 2005 .

[12]  Konstantinos Boulouchos,et al.  Simulations of spray autoignition and flame establishment with two-dimensional CMC , 2005 .

[13]  Rolf D. Reitz,et al.  Comparison of the Characteristic Time (CTC), Representative Interactive Flamelet (RIF), and Direct Integration with Detailed Chemistry Combustion Models against Optical Diagnostic Data for Multi-Mode Combustion in a Heavy-Duty DI Diesel Engine , 2006 .

[14]  D. Tree,et al.  Soot processes in compression ignition engines , 2007 .

[15]  M. Musculus,et al.  In-Cylinder and Exhaust Soot in Low-Temperature Combustion Using a Wide-Range of EGR in a Heavy-Duty Diesel Engine , 2007 .

[16]  F. Battin‐Leclerc.  Detailed chemical kinetic models for the low-temperature combustion of hydrocarbons with application to gasoline and diesel fuel surrogates , 2008 .

[17]  E. Mastorakos,et al.  Diesel Engine Simulations with Multi-Dimensional Conditional Moment Closure , 2008 .

[18]  Rolf D. Reitz,et al.  Gradient effects on two-color soot optical pyrometry in a heavy-duty DI diesel engine , 2008 .

[19]  Caroline L. Genzale,et al.  Effect of Ignition Delay on In-Cylinder Soot Characteristics of a Heavy Duty Diesel Engine Operating at Low Temperature Conditions , 2009 .

[20]  R. Reitz,et al.  Effect of Radiation on Diesel Engine Combustion and Heat Transfer , 2009 .

[21]  Charles J. Mueller,et al.  Recent progress in the development of diesel surrogate fuels , 2009 .

[22]  Konstantinos Boulouchos,et al.  Multi-dimensional Conditional Moment Closure Modelling Applied to a Heavy-duty Common-rail Diesel Engine , 2009 .

[23]  E. Mastorakos.  Ignition of turbulent non-premixed flames , 2009 .

[24]  Wenmiao Chen,et al.  A soot formation embedded reduced reaction mechanism for diesel surrogate fuel , 2009 .

[25]  R. Reitz,et al.  Development of a Practical Soot Modeling Approach and Its Application to Low-Temperature Diesel Combustion , 2010 .

[26]  Rolf D. Reitz,et al.  Investigation of the Roles of Flame Propagation, Turbulent Mixing, and Volumetric Heat Release in Conventional and Low Temperature Diesel Combustion , 2010 .

[27]  Konstantinos Boulouchos,et al.  Experiments and Simulations of n-Heptane Spray Auto-Ignition in a Closed Combustion Chamber at Diesel Engine Conditions , 2010 .

[28]  H. Ng,et al.  Development of an integrated reduced fuel oxidation and soot precursor formation mechanism for CFD simulations of diesel combustion , 2011 .

[29]  Robert W. Bilger,et al.  Modeling evaporation effects in conditional moment closure for spray autoignition , 2011 .

[30]  Michele Bolla,et al.  MS3-2 Application of a Conditional Moment Closure Combustion model to a large two-stroke marine Diesel engine reference experiment(MS: Modeling and Simulation,General Session Papers) , 2012 .

[31]  Christopher J. Rutland,et al.  A mixing controlled direct chemistry (MCDC) model for diesel engine combustion modelling using large eddy simulation , 2012 .

[32]  A. Kronenburg,et al.  The Numerical Simulation of Diesel Spray Combustion with LES-CMC , 2012 .

[33]  Konstantinos Boulouchos,et al.  Simulations of Diesel Sprays Using the Conditional Moment Closure Model , 2013 .

[34]  M. Musculus,et al.  Conceptual models for partially premixed low-temperature diesel combustion , 2013 .

[35]  Konstantinos Boulouchos,et al.  Soot Formation Modeling of n-Heptane Sprays Under Diesel Engine Conditions Using the Conditional Moment Closure Approach , 2013 .

[36]  Konstantinos Boulouchos,et al.  Predicting In-Cylinder Soot in a Heavy-Duty Diesel Engine for Variations in SOI and TDC Temperature Using the Conditional Moment Closure Model , 2013 .

[37]  M. Bolla,et al.  Modelling of soot formation in a heavy-duty diesel engine with conditional moment closure , 2014 .