Soft lithography replication of polymeric microring optical resonators.

We have developed a soft lithography method to replicate polymeric integrated optical devices. In this method, the master device and the molded replica are made of the same materials, allowing direct comparison. To evaluate the quality of the replication, microring optical resonators are chosen as test devices because of their sensitivity to small fabrication errors. The master devices are precisely fabricated using direct electron beam lithography. The replicas are produced by the molding technique and subsequent ultraviolet curing. Compared with the master devices, the molded devices show minimal change in both physical shape and optical performance. This correspondence indicates the merits of soft lithographic methods for fabrication of precision integrated optical devices.

[1]  R. Horváth,et al.  Fabrication of all-polymer freestanding waveguides , 2003 .

[2]  Larry R. Dalton,et al.  Polymer-based optical waveguides: Materials, processing, and devices , 2002 .

[3]  R. Cingolani,et al.  Flexible organic distributed feedback structures by soft lithography , 2003 .

[4]  G. Whitesides,et al.  Soft Lithography. , 1998, Angewandte Chemie.

[5]  Larry R. Dalton,et al.  Polymer micro-ring filters and modulators , 2002 .

[6]  Reginald K. Lee,et al.  Ring fiber resonators based on fused-fiber grating add-drop filters:application to resonator coupling. , 2002, Optics letters.

[7]  G. Whitesides,et al.  Fabrication of photonic crystal lasers by nanomolding of solgel glasses. , 1999, Applied optics.

[8]  A Yariv,et al.  Control of critical coupling in a ring resonator-fiber configuration: application to wavelength-selective switching, modulation, amplification, and oscillation. , 2001, Optics letters.

[9]  S. Quake,et al.  From micro- to nanofabrication with soft materials. , 2000, Science.

[10]  G. Whitesides,et al.  Unconventional Methods for Fabricating and Patterning Nanostructures. , 1999, Chemical reviews.

[11]  J. Rogers,et al.  Distributed feedback ridge waveguide lasers fabricated by nanoscale printing and molding on nonplanar substrates , 1999 .

[12]  G. Whitesides,et al.  Soft lithographic methods for nano-fabrication , 1997 .

[13]  J. Rogers,et al.  Emission characteristics of two-dimensional organic photonic crystal lasers fabricated by replica molding , 1999 .

[14]  A..  Universal relations for coupling of optical power between microresonators and dielectric waveguides , 2004 .

[15]  Chung-Yen Chao,et al.  Polymer microring resonators fabricated by nanoimprint technique , 2002 .

[16]  George M. Whitesides,et al.  Demonstration of waveguide couplers fabricated using microtransfer molding , 1997 .

[17]  L. Eldada,et al.  Advances in polymer integrated optics , 2000, IEEE Journal of Selected Topics in Quantum Electronics.

[18]  M. Ichikawa,et al.  Organic Polymer DBR laser by Softlithography , 2002 .

[19]  A. Yariv.  Critical coupling and its control in optical waveguide-ring resonator systems , 2002, IEEE Photonics Technology Letters.

[20]  John A. Rogers,et al.  Low-cost, low-loss microlens arrays fabricated by soft-lithography replication process , 2003 .

[21]  J. Rogers,et al.  Using printing and molding techniques to produce distributed feedback and Bragg reflector resonators for plastic lasers , 1998 .