Series connection of IGBTs with active voltage balancing

This paper describes a gate drive circuit for series-connected IGBTs in high voltage applications. The control criterion of the gate drive circuit is to actively limit the voltages during switching transients, while minimizing the switching transient and losses. In order to achieve the control criterion, a closed loop control scheme is adopted. The closed loop control injects current to an IGBT gate as required to limit the IGBT collector-emitter voltage to a predefined level. The performance of the gate drive circuit is examined experimentally by the series connection of three IGBTs with conventional snubber circuits. The experimental results show the voltage balancing by an active control with wide variations in loads and imbalance conditions.

[1]  Patrick R. Palmer,et al.  The series connection of IGBTs with optimised voltage sharing in the switching transient , 1995, Proceedings of PESC '95 - Power Electronics Specialist Conference.

[2]  C. Gerster.  Fast high-power/high-voltage switch using series-connected IGBTs with active gate-controlled voltage-balancing , 1994, Proceedings of 1994 IEEE Applied Power Electronics Conference and Exposition - ASPEC'94.

[3]  P. Hofer,et al.  Gate-control strategies for snubberless operation of series connected IGBTs , 1996, PESC Record. 27th Annual IEEE Power Electronics Specialists Conference.

[4]  Salvatore Musumeci,et al.  Active voltage balancement of series connected IGBTs , 1995, IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting.